paul- wrote:
> It puzzles me too, I left it settable for that reason.
>
I'm in good company then :). I won't lose sleep over it in that case.
paul- wrote:
> Perhaps.. a power cycle is what I planned.
Fine by me. Disconnecting is therefore a way to (temporarily) remove a
player from
chill wrote:
>
> A few puzzling things at the moment:
> 1) There's a 'BT Delay' setting that defaults to 1000. I'm wondering
> what this is for, and whether it interacts with the 'Player Audio Delay'
> setting in LMS. I tried varying that number, and couldn't figure out
> what difference it
Known Issue: Sound does not work with onboard audio...if your not
using onboard audio, what device are you using?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Runs fine in 32 bit, but when I change the config.txt file for 64 bit
Squeezelite won't start.
I've attached the dmseg file. Hope that helps.
Howard
paul- wrote:
> Its no bother..look at the bottom of the pcp page, if it says
>
> 4.19.73-pcpCore_v8, then your in the 64 bit kernel.
I haven't got around to replacing the b1 image on my main 4GB Pi4 (lots
of settings to transfer over), but I've installed the new beta in 64-bit
mode onto my spare 1GB Pi4. I do like the new Bluetooth settings. I
like that I can have multiple speakers connected, and I like that I can
give them
acanning wrote:
> I've downloaded and have booted the Pi4 using Raspbian :)
> Using SSH I have carried out the following commands;
> sudo apt-get update
> sudo apt-get dist-upgrade
>
> After about 20 minutes of activity I have rebooted and using command
> "/opt/vc/bin/vcgencmd version" I get;
Success :)
Thanks again.
acanning's Profile: http://forums.slimdevices.com/member.php?userid=13303
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
to anyone else who has had the same problem, it appears to be solved
following Paul's later suggestion above.
I reformatted the NTFS drive to ext 4 using Mini Tool Partition Wizard
Win10, added Music and Playlist folders with Paragon's free version of
Linux file systems for windows, then
Its no bother..look at the bottom of the pcp page, if it says
4.19.73-pcpCore_v8, then your in the 64 bit kernel.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Thanks Paul
You are right in that I probably shouldn't be fiddling with things I
clearly don't understand but I enjoy the challenge and it helps me to
learn.
I have successfully updated the bootloader using your method and the new
version of PCP. All seems to be working very well and I have
Not sure when you updated your boot loader, as I don't think Aug15 has
ever been standard.
The bootloader update has ZERO to do with installing pCP. If you don't
know why you should be updating your bootloader, perhaps you should not
do it.
piCorePlayer a small player for the Raspberry Pi
paul- wrote:
> pikeyd doesn't support encoders either (Unless somehow it's making a
> joystick out of gpios) ..let me take a look at the keyboard part of
> the software. If I get something I'll bring it up in the spbd
> topic,
Thank you!
I've downloaded and have booted the Pi4 using Raspbian :)
Using SSH I have carried out the following commands;
sudo apt-get update
sudo apt-get dist-upgrade
After about 20 minutes of activity I have rebooted and using command
"/opt/vc/bin/vcgencmd version" I get;
Aug 15 2019 12:03:51
Copyright
pikeyd doesn't support encoders either..let me take a look at the
keyboard part of the software. If I get something I'll bring it up
in the spbd topic,
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
The only software I use is PCP, I've never tried Raspbian.
acanning's Profile: http://forums.slimdevices.com/member.php?userid=13303
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
acanning wrote:
>
> Can I try the new beta without updating the bootloader?
>
Yes, that error message is telling you that the firmware being used is
not new enough to upgrade the bootloader. Firmware is not the same as
the bootloader.
The pi4 bootloader is not even contained in the image.
Quick question
Do I need to update the bootloader in order to try the 64bit version of
the new beta? I got an error when I tried to update the bootloader just
now;
"vcgencmd: 'bootloader_config' command not supported. Please update VC
firmware"
The same as experienced by gilladur I think.
paul- wrote:
> What are you trying to control, spbd is availiable, it directly connects
> to lms, but runs alongside of jivelite
Hello, thank you for your reply
I have sbpd installed for volume controls but I would like to move up
and down through the jivelite gui.
What are you trying to control, spbd is availiable, it directly connects
to lms, but runs alongside of jivelite
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Hello,
Could somebody help me on how to install (and configure) pikeyd to work
with jivelite and rotary encoders.
Thank you!
Jursi's Profile: http://forums.slimdevices.com/member.php?userid=69100
View this thread:
Hi pputzer,
now i works! I am happy.
I used the wrong pins for poweroff and shutdown. It was my error.
Thank you very much for your help.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith 7"Display and
Hi pputzer,
i have tried your overlay definition description without success.
Gerhardc
+---+
|Filename: Screenshot_2019-09-24 pCP - Tweaks.png |
|Download:
Gerhardc wrote:
> sorry, i am i little confusing. I have not the PI-SPC board. The ES9032
> has similar function. My understanding is it works the same way as
> PI-SPC Board.
Yes, that's why I meant you could try those settings even without the
extra board.
(I'm not Paul BTW)
Hi Paul,
sorry, i am i little confusing. I have not the PI-SPC board. The ES9032
has similar function. My understanding is it works the same way as
PI-SPC Board.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith
Gerhardc wrote:
> the powerswitch is connected to the ES9032 board and the Raspi receives
> power from ES9032. I think there is a PI-SCP.
The PI-SPC would be 'this board'
Hi Paul,
the powerswitch is connected to the ES9032 board and the Raspi receives
power from ES9032. I think there is a PI-SCP.
Gerhardc
1x Picoreplayer with Hifiberry DAC, 3x Picoreplayer with Jivelite 7"
Display und IQaudio DigiAmp+, 4x Picoreplayer wiith 7"Display and
Audiophonics Sabre
Gerhardc wrote:
> Hi Paul,
>
> my system is a Raspi 3B. The Audiophonics power switch is working on PCP
> Version 5.
>
> Gerhardc
Are you using just the switch or the power board (PI-SPC) as well?
pputzer's Profile:
27 matches
Mail list logo
