Further down on the wifi page, there should be a scan results section.
This will show signal strength.
What does that say.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Might make a post in the squeezelite thread, or raise an issue on
github. https://github.com/ralph-irving/squeezelite
Not sure if Ralphy will spot this post here or not.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Use 6.0.0 - currently a public beta
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you
castalla wrote:
> Same unit:
>
> Sqpos - sound on internal without cable. Sound disappears when cable
> inserted.-plays on external speaker
>
> Jivelite - sound on internal. Sound continues on internal when cable
> inserted - no sound on external speaker
The insertion of the cable is
The only difference between the two is that the 64bit version has mmx
extensions disabled, which has been the case since I started providing
builds.
I've uploaded a '32bit build with mmx extensions disabled'
D1eter wrote:
> I have only ever run SqueezePlay from a shell prompt so far but never
> seen any error messages, even with all sorts of debug turned on. There
> seems to be a size limit to JPEG cover art. Artwork smaller than 600x600
> seems to be displayed correctly. If cover art is PNG then
newpeter wrote:
> What options in Squeezelite should be set so that Rpi 3B + works only
> with the Allo Kali 44/48 HAT overlay? The goal is to develop a clear I2S
> signal for an external DAC.
Do you want squeezelite to resample? or just tell lms to only send
44/48 to the device.
castalla wrote:
> Problem, I'm afraid.
>
> Sound plays on internal speakers - a line-out doesn't cut the internal
> speakers and no sound on wired speaker ((unlike sqpos 3 where the sound
> is only on the line out)
I've just tried this on 4 different Jogglers. On three of them the
sound
castalla wrote:
> Same unit:
>
> Sqpos - sound on internal without cable. Sound disappears when cable
> inserted.-plays on external speaker
>
> Jivelite - sound on internal. Sound continues on internal when cable
> inserted - no sound on external speaker
I can't explain that. I'll try
So it occurred again last night. With LMS server player logging on, I
got the file that it crashed on. It was an iOS voice memo. I believe
I've noticed in the past some odd encoding of these, so I guess it makes
sense.
Interestingly, when re-playing that same file, I'm unable to get
squeezelite
Hello
I am a totally new user. I got an RPi4 to experiment with music
streaming in my house. I have followed the instructions on the
piCorePlayer website to burn the image to an SD card.
When I turn on my RPi nothing happens. The green light briefly flashes
and then remains off while the red
bpa wrote:
> There's a new version 1203 of Squeezeplay for i386 just uploaded but
> there is no new commit to indicate a code change.
You're right. r1203 is just an update to the makefile to build for
picoreplayer. But the test build does have mmx extensions disabled for
the sdl gfx library.
d6jg wrote:
> The insertion of the cable is supposed to activate a switch but clearly
> doesnt.
> Have you rebooted the Joggler with the cable already in place?
The switching works with sqpos ...
But I'll try ... no luck it seems
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers:
Thanks for the tip! Done:
https://github.com/ralph-irving/squeezelite/issues/87
pianogineer's Profile: http://forums.slimdevices.com/member.php?userid=69819
View this thread:
chill wrote:
> I've just tried this on 4 different Jogglers. On three of them the
> sound played on the internal speakers until a 3.5mm jack was inserted,
> at which point the sound switched over to the speaker connected to that
> jack. The fourth one behaved as yours does - sound from the
kbeast wrote:
> I'm running picoreplayer 6b7 and managed to get wifi and openvpn working
> tethered from my cell phone. I currently have the official touchscreen
> attached and when it's connected with VPN, audio plays if control it
> with a seperate controller. When I try to use the
Interestingly enough i got it working. I had to go to advanced > remote
libraries, then punch in my IP address of my LMS and I was good to go.
I think i can script something based on the wifi to connect to the vpn
or not. I'm not overly concerned because this is going to be my travel
player
I'm running picoreplayer 6b7 and managed to get wifi and openvpn working
tethered from my cell phone. I currently have the official touchscreen
attached and when it's connected with VPN, audio plays if control it
with a seperate controller. When I try to use the touchscreen, it can't
find my
chill wrote:
> This is all new territory for me. I guess it's something to do with the
> alsa setup, so I'll see what I can learn by comparing the two versions.
For what it's worth, the alsamixer versions are different - probably
nothing to do with it.
LMS server: Pi Zero
Amp: Denon
I have a problem with wlan on Pi4/4GB when running beta 6.0.7. I am
making the configuration, saving it, than the wlan connection is
established, i can see, that pi received the ip for wlan, than shutdown,
i am removing the network cable and ... when booting the wlan connection
is not
Hmm - I've spotted the connection. Of my four Jogglers, the odd one out
is the one that's running from a USB memory stick. If I boot one of the
others from the same USB image, rather than in the internal image
they've been using, then alsamixer no longer offers the headphone option
or the
praganj wrote:
> I have a problem with wlan on Pi4/4GB when running beta 6.0.7. I am
> making the configuration, saving it, than the wlan connection is
> established, i can see, that pi received the ip for wlan, than shutdown,
> i am removing the network cable and ... when booting the wlan
I meant to say work well. It does not deal well with interface changes.
I suspect vpn is creating an interface.when you go back to a
non-vpn interface, don't be surprised if you have a problem.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
I see the first graphic.
I'm going to see what sqpos shows
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon
castalla wrote:
> Sqpos is different - same as your second image
>
> Very strange
This is all new territory for me. I guess it's something to do with the
alsa setup, so I'll see what I can learn by comparing the two versions.
Content is above me ... but I found this:
https://wiki.archlinux.org/index.php/Advanced_Linux_Sound_Architecture#Tips_and_tricks
Might help ?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha
It seems like the autoswitching can be configured, using alsamixer. But
I'm seeing differences between my 4th Joggler and one of the others. If
you ssh in and type 'alsamixer' you should see a screen something like
this:
[image:
Hi Paul!
Pin 5 & 6.
pCP v5.0.0 on all players
LMS 7.9.2 on Debian Buster server in a Linux Container
RPi 3B+ with Hifiberry AMP2 and official 7" touchscreen (Squeezelite +
Jivelite), +27k titles on SMB share
RPi B as dedicated player, connected over wifi with USB dongle
RPi 2B as dedicated
castalla wrote:
> I see the first graphic.
>
> I'm going to see what sqpos shows
Sqpos is different
+---+
|Filename: alsasqpos.png|
|Download:
FYI - sqpos is running on expanded usb (like JFJ)
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5,
If you are using pins 3 or 5, you need to disable i2c as noted earlier.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
praganj wrote:
> I have a problem with wlan on Pi4/4GB when running beta 6.0.7. I am
> making the configuration, saving it, than the wlan connection is
> established, i can see, that pi received the ip for wlan, than shutdown,
> i am removing the network cable and ... when booting the wlan
stashrudolf wrote:
> I am beyond frustrated!
>
> First of all, I have searched this forum and the whole Internet at least
> a dozen of times before turning to you my fellow forum members.
>
> My problem is the following:
> -at my home I have two Raspberries with PiCorePlayer installed on
chill wrote:
> Marvellous - thanks Paul.
>
> I removed an unnecessary output, added some 'new lines', and tidied up
> the comments so that it better reflects how it works.
>
> >
Code:
> > #!/bin/sh
>
> # start pigpiod daemon
> pigpiod -t 0
>
> # wait for
Oh I meant to add that the earlier suggestion to have some limit to how
many seconds that loop can run makes a lot of sense.
gregklanderman's Profile: http://forums.slimdevices.com/member.php?userid=3524
View this thread:
bpa wrote:
> IIRC Ralphy does maintenance so you could PM him.
> It is an odd problem - it feels like a library is missing.
> Have you run squeezeplay i386 from a shell prompt and are any message
> put up.
I have only ever run SqueezePlay from a shell prompt so far but never
seen any error
What options in Squeezelite should be set so that Rpi 3B + works only
with the Allo Kali 44/48 HAT overlay? The goal is to develop a clear I2S
signal for an external DAC.
newpeter's Profile:
Is there any chance of supporting this device in pCp 6.
Just exploring streaming high quality analog audio say FM Tuner, CD
Player, Record Deck etc etc
The streaming seems to be an available feature on the Tweaks page - but
the support for this device isn't there.
Just experimenting.
I know
Problem, I'm afraid.
Sound plays on internal speakers - a line-out doesn't cut the internal
speakers and no sound on wired speaker ((unlike sqpos 3 where the sound
is only on the line out)
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s &
paul- wrote:
> We support the hifiberry ADC products. This one might take a little
> work. They are using the HAT eeprom to automatically load drivers, I'm
> not sure we have that mechanism in pCP (Never researched it) But
> there are not new drivers published for the card, so I'm not
We support the hifiberry ADC products. This one might take a little
work. They are using the HAT eeprom to automatically load drivers, I'm
not sure we have that mechanism in pCP (Never researched it) But
there are not new drivers published for the card, so I'm not sure what
they are
I am beyond frustrated!
First of all, I have searched this forum and the whole Internet at least
a dozen of times before turning to you my fellow forum members.
My problem is the following:
-at my home I have two Raspberries with PiCorePlayer installed on both.
-until a couple of weeks ago
I don;t have an immediate answer for you but your screenshot show WiFi
credentials so you might want to remove the screenshot and scribble over
that part and put it back.
Of course, for now at least, no-one knows who you really are and, more
importantly, where you are - but if that becomes
dmesg and lsmod attached - I hope
+---+
|Filename: lsmod.txt|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29289|
Meanwhile, I have tested with SqueezePlay-setup-7.8.0r1188 on W7 32bit
(br...) . Artwork displays without issues. I'd much prefer to run
Linux though.
Anyway, is this even the right place to ask questions about SqueezePlay?
D1eter wrote:
> Meanwhile, I have tested with SqueezePlay-setup-7.8.0r1188 on W7 32bit
> (br...) . Artwork displays without issues. I'd much prefer to run
> Linux though.
>
> Anyway, is this even the right place to ask questions about SqueezePlay?
IIRC Ralphy does maintenance so you could
46 matches
Mail list logo