Greg Erskine wrote:
> Hi Stoker,
>
> I have noticed this happens from time to time, not just with the recent
> version of pCP. Each time I have investigated I have not need able to
> work out why, which usually indicates a timing issue. I just try a
> reboot as my first op
Hi
Not sure if this is a bug but since moving to 6.0.0-rc1 on 3 occasions
when I go to use my piCorePlayer instead of the JiveLite screen I see a
screen full of text, same as when the system boots except that there's a
message that says JiveLite is currupted remove and reinstall (or words
to
Zabizabo wrote:
> I'm using Linux Mint platform and my image burner is Etcher. For the
> editor, I'm using the one in Linux Mint. Is there an other one more
> performant?
I think the standard editor in Mint is xed. Maybe install Ghex and take
a look at a hex dump of the file to see if any
paul- wrote:
> The uid= and gid=xxx option should be set to your userid for ubuntu.
>
> When I gave you that information, I thought you were mounting the other
> direction.
Thank you, I'm very grateful for all your help with this. It's all
working properly now.
Cheers
--Ian
--ian
Hi Paul, thanks again for replying.
paul- wrote:
> I've been fighting a cold here, so not totally with it. I completely
> missed the direction you were mounting.
>
> First make sure that the local user account on pCP has complete write
> access to the folders. (The easiest way is to press
paul- wrote:
> Its hard to track these issues as they are regional. A download may
> work fine here in the US, but in the UK fails. Cloudflare is the CDN
> and they have many global datacenters. When it's working, its a nice
> speedy delivery, but we have seen many problems.
>
> In pCP6,
Jeff07971 wrote:
> Have you expanded (resized) the partition to allow for this ?
>
> Also there is a source checker under "extensions" (In Beta Mode) are
> they all in green ?
>
> Mine show all OK
>
> Jeff
Thanks for the reply. Yes, I have 1.7G available and all are green.
--ian
Been trying to install Jivelite on my piCorePlayer (5.0.0) from the pCP
web interface, but keep getting the following error:
[ ERROR ] There was a error downloading pcp-jivelite.tcz.
It retries a few times with the same error and then gives up. Also at
the same time it's trying to download
paul- wrote:
> The username field is whatever username you have setup on your server.
> If a file is user writable and the server doesn't let you write, then it
> sounds like a server settings issues.
I'm stumped! The Samba server is set up as follows: Server Name:
piCoreLMS, Server
paul- wrote:
> add uid=1001,gid=50. To the mount options.that should have been
> defaulted in that field
Hi Paul, that has changed things a little bit but I still don't have
write access.
After adding the uid and gid an ls -l shows
-rwxr-xr-x 1 tc staff 6007978 Jun 12 16:11
paul- wrote:
> Get rid of the ./ in front of sMusic.
Thanks for the reply Paul, unfortunately that didn't make any
difference, behaviour exactly as before :(
--ian
Stoker's Profile:
Hi
Having trouble writing files to a drive mounted on piCorePlayer from my
Ubuntu PC.
The drive contains all my music. It's an SSD connected to a USB port
using an SATA/USB adapter. I set up LMS and Samba on pCP using the
guides on the pCP help pages and it all works flawlessly until I try to
paul- wrote:
> The Fat partition is only the boot disk. That dirty bit is very common
> and mostly harmless.
>
> Partition 2 is where the extensions reside, and all of the pCP web
> interface. All of those Squashfs errors are happening when the system
> is trying to load LMS... The
paul- wrote:
> Is your LMS set to save the cache on the SD card?
>
> Can you go to the diagnostics page and look at the Boot Log. See if
> there is anything odd in dmesg too. If the partition has errors on it,
> the easiest way to fix them would be to stick the SD card in another
> Linux
Hi
Tried to play some music this morning and discovered that LMS is not
running. When I go to the piCore player web interface, in the Main Page
there's a red cross and the text: LMS is not running.
If I go to the LMS tab of the piCore Player web interface and hit the
start button I get the
Furry wrote:
> What (which plugin?) causes the pCP to show up as a renderer in
> BubbleUPNP?
Sorry not been around for a few days.
The only two plugins that I've got active that look like they may have
something to do with UPnP are:
Remote Music Libraries (v1.0) by Logitech
UPnP/DLNA Media
julien29 wrote:
> not yet.
> Do you have an how to configured airplay feature ?
Not sure if it's airplay or some other type of casting but I use
BubbleUPNP on my Android to cast to my piCorePlayer (and also to a SB3),
just hit the cast button and select the piCorePlayer from the list of
paul- wrote:
> You can try to do incremental updates 3.20->3.21->3.22.But it
> would probably be better just download a new image.
I had a similar issue when trying to update from 3.22 to 4.0.0. I can
confirm that, for me, updating from 3.22 to 3.5 and then updating from
3.5 to 4.0.0
Greg Erskine wrote:
> hi Stoker,
>
> There is already this option:
>
> [Tweaks] page > Schedule CRON jobs > "Schedule piCorePlayer reboot"
>
> regards
> Greg
Hi Greg
Thanks for that, I didn't no
ralphy wrote:
> I've seen this issue as well, but have so far been unable to track down
> the cause.
> We'll eventually figure out what's happening.
> In the meantime you'll have to reboot when it happens.
>
> You could try setting up a custom cron command on the tweaks tab to
> restart
w3wilkes wrote:
> I built a PiCorePlayer using a Raspberry Pi 3 model B and Hifiberry DAC+
> Pro. Went together without a hitch. Installed Picoreplayer 3.22 (not
> audio) and that went well. I've now got it all working on my wifi
> network, but I have an audio problem. For the most part it's
ralphy wrote:
>
> You could try setting up a custom cron command on the tweaks tab to
> restart jivelite daily which may or may not help.
> This will cause jivelite to exit and restart at 2am each day.
>
> >
Code:
> > 0 2 * * * /usr/bin/pkill -15 jivelite
Hi
I'm running pCP 3.22 with (as far as I can tell) the latest version of
Jivelite.
I leave pCP powered on all the time and I've noticed that every now and
again, probably less than once a month, that when I come to listen to
some music the Jivelite interface is frozen.
Symptoms are that the
Hi
Would installing avahi allow me to connect to the pCP web interface
using it's host name instead of it's IP address? I've done some Googling
but it's still not clear to me!
Currently I need to access the web interface using an address like this:
http://192.168.0.16/cgi-bin/main.cgi where
paul- wrote:
> It can be done, the setup and configuration has to be done via ssh
> session. I've sent instructions to some via pm. The biggest problem is
> that not all wifi chips support it. I've tested it with a rpi3 a few
> versions ago.
Hi Paul
Would you be able to send instructions to
mherger wrote:
>
> http://picoreplayer.sourceforge.net/how_to_upgrade_lms.shtml - this
> describes the procedure. Once you're on 7.9.1, the regular update
> through the web UI should work.
Thanks Michael and Kidstypike, worked like a charm.
If only I'd searched in the 3.20 Beta thread
Hi
Is it possible for me to upgrade the LMS in piCorePlayer to 7.9.1? I'm
sure it is, somehow, but when I try to do it via the "Update" button on
the LMS tab in pCP web interface it says no updates available (same in
the server settings/advanced/software updates).
LMS 7.9.1 would be useful as,
Managed to get it working by manually installing util-linux.tcz from the
extensions page, once done my usb disk was recognised and I've now got a
fully working system!
Many thanks to the entire pCorePlayer team.
--Ian
Stoker wrote:
> Hi
>
> I've just updated to 3.20, fresh install
Hi
I've just updated to 3.20, fresh install on new SD card. Everything
working well up until I tried to mount my usb music disk.
Using the Web interface, I selected the LMS page and then in the "Pick
from the following detected USB disks to mount" section I see the
following message:
Disk with
Thanks for the replies to my PiCoreServer questions. Seems like it
should be fairly straight forward.
I've got a 250G SSD which should be OK for the music storage, it's SATA
but With an adapter it can be turned int a USB disk. Yesterday I managed
to reformat this SSD to Ext4 and copied my
Hi Guys
I'm thinking of replacing my ageing LMS machine (Ubuntu PC) with a Pi
running PiCorePayer. I use PiCorePlayer as a player with great success
but would just like to ask if there's anything I need to be especially
aware of when commissioning my new server! This server will not need to
be
AngloCuencano wrote:
> I have the same set up as you that I power successfully with a 2A supply
> from Adafruit: https://www.adafruit.com/products/1994.
On further investigation, people were complaining on Amazon about slow
charge rate for the power supply I'm currently using so I'm surprised
Hi
I've just up graded to pCP 3.10 onto my rPi2B +IQ DAC, all went well
until I enabled JiveLite, then I noticed I could no longer access the
web server and on boot I am seeing the little yellow lightning bolt in
top right corner of console. I guess this means my power supply isn't up
to driving
Hi
Just wondering if it's possible to bridge between the WiFi and the
ethernet* using PiCorePlayer, like you used to be able to do on the
SB3.
I found a similar question in the original PiCorePlayer thread and Greg
replied saying that "he'd add it to the list but don't hold your breath"
JackOfAll wrote:
Enabled, but not started. If you start it, sudo systemctl start
squeeze-web-gui-lua, does it stay running and can you access it via
port 8081?
I ran the systemctl start command, still can't access the lua web pages
and the output from the systemctl status command is:
JackOfAll wrote:
Something very strange going on here. Try this... remove
squeeze-web-gui-lua and then install again.
Code:
sudo yum remove squeeze-web-gui-lua squeeze-web-gui-lua-httpd
sudo yum install squeeze-web-gui-lua squeeze-web-gui-lua-httpd
JackOfAll wrote:
General updates. (Fedora and CSOS stable)
Code:
sudo yum update
After not doing any updates for a while I tried the above yesterday
from a putty session, using fedora/fedora as login.
The process went
JackOfAll wrote:
The making the lua web gui default was via an image update not a package
update. If you give me the output of
Code:
rpm -qa | grep squeeze-web-gui | sort -d
I'll tell you what to do, so as to save you
JackOfAll wrote:
Code:
sudo userdel -r squeeze-web-gui-lua
sudo csos-cleanInstall squeeze-web-gui-lua squeeze-web-gui-lua-httpd
Then the lua web gui should be available on http://wandboard.local;
or http://wandboard.local:8081;
JackOfAll wrote:
userdel cmd, I expected to fail if you hadn't had the
squeeze-web-gui-lua package installed before. You still don't have the
-httpd subpackage installed, which you need for the Apache proxy config.
Why, I don't know.
Code:
sudo
JackOfAll wrote:
What does sudo systemctl status squeeze-web-gui-lua say? Disabled,
enabled, not running, running???
squeeze-web-gui-lua.service - Web Configuration and Control Interface
(lua version)
Loaded: loaded (/usr/lib/systemd/system/squeeze-web-gui-lua.service;
enabled)
Active:
rmac321 wrote:
I haven't had a chance to go back through the thread, but that was the
thrust of my post - the guide needs an update. Most people will muddle
through, but it could cause issues for some...
That's what I did. Would be good addition to the Quick Start.
I was
JackOfAll wrote:
Ian, how are you? Hope you are well.
I'm fine thanks Clive. Still following the development here with
enthusiasm, although I keep quiet most of the time unless needed.
I'll hold off with the update to the quick start guide until you give me
the go ahead.
Cheers
--ian
JackOfAll wrote:
Would appreciate it if people currently running a F19 image.
Code:
sudo csos-cleanUpdate squeezelite ffmpeg2-libs jivelite jivelite-autologin
logitechmediaserver
Not sure what's going on here. I did the
JackOfAll wrote:
1. I'd hope we are going to be able to get the beta boards manufactured
in October and into users hands by November. But to play it safe, by the
end of the year, as John says.
Hi JackOfAll
Is there any further news on the beta boards? Are they still on target
for the
ChrisMmm wrote:
I can't believe it, I have spend days booting, re-imaging, rebooting ad
nauseam BUT I have found the cause of my problems. Quite simply just
wait! Wait 1 minute (maybe less but just to be safe) after power down
before re-introducing the power plug! Having a serial cable to
dsdreamer wrote:
Code:
$ md5 CSOS-Wandboard-Dual-F19-R1-20130811-1.img.7z
MD5 (CSOS-Wandboard-Dual-F19-R1-20130811-1.img.7z) =
096a1410ec7b17ceedc0dc5e0cf8f5b3
$ md5 CSOS-Wandboard-Dual-F19-R1-20130811-1.img
MD5
Just about to burn a new SD card with the CSOS F19 (RELEASE 1) DualLite
CPU image downloaded via the http://www.communitysqueeze.org/ web page
and I appear to be getting a mis-match between the MD5 checksum
calculated by Win32 Disk Imager and the check sum published on the web
page (I have
JackOfAll wrote:
The $200 figure I have used above, is just a number I have plucked out
of thin air, so it is not a fixed and final figure. But on the basis
that it is the number, my question would be, how many of you, (if any),
would be prepared to pay $200 for a CSP1 beta board, which
Chunkywizard wrote:
O.k., there is something screwy with my setup here. On my latest image
(go 3), after the scan happened last night, I got the problem with the
plugin page again. Just now I shutdown the Wandboard using the UI. I
waited 3 minutes (to be sure, the UI said 30 seconds) and I
Hi all
The quick start guide has been updated to add a section on configuring
the wireless network.
The guide is on the Website here: http://www.communitysqueeze.org/ I
won't be making pdf's available anymore, the website is definitive!
Hi JackofAll
Just got my DAC working with the Wandboard, here are the details:
Name: HifiMeDiy Sabre USB DAC
URL: http://hifimediy.com/index.php?route=product/productproduct_id=83
Driver: Sorry don't know
Max Rate: 96k/24-bit
Class: UAC2 (I think) uses a TenorTE7022L USB chip
Used by: Stoker
Stoker wrote:
Good idea, will try out Netscan and add it to document.
Updated version of the quickstart guide on my Dropbox, has the Netscan
stuff added:
https://www.dropbox.com/s/sr55weuq5xo3s1o/QuickStart_v1.pdf
JackOfAll wrote:
Ian, reply to my PM please!
Have done!
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http://forums.slimdevices.com/showthread.php?t=98544
JackOfAll wrote:
I have got a pro web developer on-board for the whole of next week, to
do a website design. Forgetting about photos for a moment, we still need
some more content. It's down to me to write some detail, dealing with
eg. how to use the software repo, (for non ARM Wandboard
castalla wrote:
My only point is that some routers are hopeless at displaying what's
connected. There's a nice free utility called Netscan (for Windows)
which displays all devices on the network - might be useful?
Good idea, will try out Netscan and add it to document.
--ian
Hi FunkyELF
I'm currently doing more or less what you're trying to do, only a single
RPi though. RPi as a player with Squeezebox server running on my always
on linux machine. I can confirm that Spotify is working using Triode's
plugin on the server, never tried Logitech's Spotify or any of the
Stoker wrote:
New download works! I've now got my RasberryPi working as a Squeezebox!
Couldn't have been simpler, thanks very much for all your efforts with
this.
My Pi has now been running with piCoPlayer for about 30 minutes with no
issues using the Pi's analogue output (which sounds
sbp wrote:
Could you please state what kind of WiFi dongle you are using?
Sure, the WiFi dongle I'm using is this one:
http://www.amazon.co.uk/gp/product/B003MTTJOY/ref=oh_details_o00_s00_i00?ie=UTF8psc=1
Stoker's
Hi Sbp
New download works! I've now got my RasberryPi working as a Squeezebox!
Couldn't have been simpler, thanks very much for all your efforts with
this.
My Pi has now been running with piCoPlayer for about 30 minutes with no
issues using the Pi's analogue output (which sounds surprisingly
Hi Bpa
I'm having trouble downloading the image files, rapidshare is saying
that the download has been disabled and I can't get the deposit files
link to work at all.
Am I doing something wrong or have you disabled download? An older
version would be OK with me if there's a problem with v4.
bpa wrote:
Can you clarify ? sbp put up the rapidshare raspbi images. I have been
playing around with a Cubieboard image.
Sorry Bpa, too many TLA's I meant to reply to Sbp!
Anyway, to clarify: I don't seem to be able to download the piCoPlayer
boot image, when I click on the link on the
Hi Triode
Just been trying squeezelite for the first time on a Windows XP laptop
with an external USB DAC.
Every time I start squeezelite I get a dialog pop up which says: The
procedure entry point NtAlpcSendWaitReceivePort could not be located in
dynamic link library ntdll.dll This happens
Gerrelt wrote:
I recently also bought a Berhinger UCA 202 USB soundcard which also
works with squeezelite, and provides very good quality sound.
Hi Gerrelt
Quick question are you using the 202 with a Rasberry PI? And another! Is
the audio free from and pops or interruptins with this
sbp wrote:
Unfortunately I don't know how many actually are using it, but on the
other hand there hasn't been any reports that it is not working, so I
take it as a good sign :-)
Hi Sbp
Not using it yet, but will be going down this root as soon as my USB DAC
arrives. I was thinking
. Is there anything different about USB drives or pherhaps that
the file system on the drive is FAT32
Any ideas?
Cheers
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http
) or possibly try a kernel upgrade and then an
dist-upgrade to lenny. Anyone have any ideas?
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http
period from the drive?
One final question, are any changes I make to the spindown time
remembered if I re-boot?
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http
Thanks again Matthew.
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http://forums.slimdevices.com/showthread.php?t=38869
timeserver and update my hardware clock?
Cheers
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http://forums.slimdevices.com/showthread.php?t=36115
Thanks guys, I give it a try tonight
Cheers
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http://forums.slimdevices.com/showthread.php?t=36115
slimserver?
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http://forums.slimdevices.com/showthread.php?t=35523
___
unix
Thanks for the replies, I'll get on and install Apache. Thanks
--
Stoker
--ian
Stoker's Profile: http://forums.slimdevices.com/member.php?userid=8264
View this thread: http://forums.slimdevices.com/showthread.php?t=35523
on a Debian system, I tried
apt-get install lame but I get a message saying package not
available. Does anyone know if there is a different server that has an
apt-get compatible version of lame?
I'm not sure I'm confident enough to down load the source and compile
it myself
Cheers
--
Stoker
--ian
-multimedia.org sid main' (no quotes) to the file
before any other uncommented entries.
3) from the command promt run: apt-get update
4) from the command prompt run apt-get install lame
Thats it, simple when you know how!
Thanks again for the help
--
Stoker
--ian
Thanks for all the replies.
It seems that I'd just installed the AlienBBC plugin to the wrong
directory. When I re-installed AlienBBC to /usr/share/slimserver (as
Gleam suggested) then it all sprang into life and I'm now happily
listening to Radio4
Thanks again guys
--
Stoker
--ian
somefile.flac from a command promt
the text shown on the screen indicates that mplayer is playing the
file.
I have mplayer v1.0rc1.
Any ideas or suggestions would be gratefully received.
--
Stoker
--ian
Stoker's Profile: http
77 matches
Mail list logo
