Re: "template" stack in custom property

On 8/2/2019 10:33 PM, ambassador--- via use-livecode wrote: What are the advantage of instantiating the new stack from data in a prop rather than by cloning a substack? That was my question too. It is a very different way of storing a stack. I imagine that an: open invisible stack (the cSav

Re: increasing column width of DG keeps running

On 8/1/2019 9:23 AM, JJS via use-livecode wrote: hi, anyone ever had this: Increase the column width of a DG by clicking on the increase button. in the property inspector, keep the mouse down until you think the column is wide enough. Then it keeps running --read increasing the width-- for

ANSWER: OSX High Sierra and Mojave Double Titlebars or Menubars?

to the Quality Center bug: https://quality.livecode.com/show_bug.cgi?id=22267 On 7/26/2019 12:27 PM, Paul Dupuis via use-livecode wrote: https://quality.livecode.com/show_bug.cgi?id=22267 We have a screen recording showing the issue (but not what triggered it!) that, when I can get it form

Purge a stack from memory

I know this comes up again and again, is there some counterpart to "revLoadedStacks(application)" that can PURGE a stack from memory? If you have a stack open, say stack "A" and you open a different stack file with a stack called "A", the IDE presents a message about stacks with the same name

Re: OSX High Sierra and Mojave Double Titlebars or Menubars?

up a bug report and if I can get more info from her I'll add to it. We have a hard deadline in about 3 weeks. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On July 26, 2019 9:16:10 AM Paul Dupuis via use-livecode wrote: On 7

Re: OSX High Sierra and Mojave Double Titlebars or Menubars?

On 7/26/2019 11:22 AM, Trevor DeVore via use-livecode wrote: On Fri, Jul 26, 2019 at 9:14 AM Paul Dupuis via use-livecode < use-livecode@lists.runrev.com> wrote: Yes, thank you. In LiveCode 905rc1 in Standalones on OSX High Sierra we are seeing an odd behavior where -- something happens

Re: OSX High Sierra and Mojave Double Titlebars or Menubars?

On 7/26/2019 12:17 AM, Trevor DeVore via use-livecode wrote: On Thu, Jul 25, 2019 at 4:05 PM Paul Dupuis via use-livecode < use-livecode@lists.runrev.com> wrote: I recall a recent (last year/this year - I think) bug where under OSX High Sierra or Mojave you could end up with double tit

OSX High Sierra and Mojave Double Titlebars or Menubars?

I recall a recent (last year/this year - I think) bug where under OSX High Sierra or Mojave you could end up with double titlebars in your windows or perhaps it was double menubars? I have spent a big chunk of time searching the Livecode Quality Center and can not find this bug. Am I delusio

Unicode languages and text selection...

In moving a commercial application that allows researchers to perform a lot of textual analysis  from LC6.7.11 to LC9.0.x, we have been trying to make sure we take advantage of "Unicode Everywhere". In do in so, we test with text in as many different languages (representative of different glyp

Re: looking for 3 or 5 testers for my Notarizing stack

On 7/22/2019 8:24 AM, Matthias Rebbe via use-livecode wrote: To test you´ll need to be a member of Apple´s developer program, a valid Developer ID Application certificate, an AppleID with 2FA and a app-specific password. What is "2FA"? ___ use-live

Re: Best Practice with Player object to determine audio or video

the mediaTYpes property returns tracks (and the documentation doesn't say whether the list is cr delimited or comma delimited, but that is a docs issue) Are you saying that for example if (the mediaTypes of player X contains "audio" and not (the mediaTypes of player X contains "video")) is de

Re: Accessibility

On 7/11/2019 2:41 PM, J. Landman Gay via use-livecode wrote: Screen readers don't work in LC. How do those of you who support accessibility provide that? Is there anything in LC itself that supports the ADA act? This comes up repeatedly on this list. Any Desktop LC app is compatible with so

Re: Question about "the screen" property of stacks...

the closest remaining monitor? On 7/11/2019 1:08 PM, Mark Waddingham via use-livecode wrote: On 2019-07-11 17:17, Paul Dupuis via use-livecode wrote: The screen of stack X returns the number of the monitor (the line number for the screenRects) that the stack/window is on. If someone from the mot

Re: Question about "the screen" property of stacks...

position, but seeing this, it makes more sense to me to move the window to the screen with the closest center. On 7/11/2019 1:08 PM, Mark Waddingham via use-livecode wrote: On 2019-07-11 17:17, Paul Dupuis via use-livecode wrote: The screen of stack X returns the number of the monitor (the line

Re: Question about "the screen" property of stacks...

number for stacks that are not open. Bob S On Jul 11, 2019, at 08:17 , Paul Dupuis via use-livecode wrote: The screen of stack X returns the number of the monitor (the line number for the screenRects) that the stack/window is on. How exactly is this determined? I presume it is based on the loc

Best Practice with Player object to determine audio or video

I'm looking for the best way (code), cross platform, to determine if the media a user selected for a player object is audio (only) or a video. I am surprised there is not some inherent player property to get this information. I am using an approach that looks at the formattedHeight (with audio

Question about "the screen" property of stacks...

The screen of stack X returns the number of the monitor (the line number for the screenRects) that the stack/window is on. How exactly is this determined? I presume it is based on the loc (location) property of the stack, since the window (effective rect or rect) itself can span multiple monit

Re: DataGrid v1 vs DataGrid v2...

On 7/9/2019 8:32 AM, Sean Cole (Pi) via use-livecode wrote: Hi Paul. It gets upgraded automatically. If it is in a Form style, the swipe actions are turned off by default to avoid ruining your old versions. Practically all of the old code works as it did before. As it's just the engine that chan

DataGrid v1 vs DataGrid v2...

QUESTION: If I have a stack with a Datagrid in it that was made in LiveCode 6.x.x. and I have now opened and saved this stack from LiveCode 9.0.5rc1 in the current (v7.0) stack format. Does the Datagrid get converted from a version1 data grid to a version 2 datagrid? Or, if I want/need the v

Re: name vs short name

No it is not consistent, but some of the syntax was baked into Metacard long ago, often in response to some specific customer asking for a way to do some specific thing. Remember, Metacard was effectively a product of a single person. For LiveCode to change it now would break far fr too many e

Re: Symantec quarantining LiveCode standalone on client's machine

On 7/2/2019 5:57 PM, Curt Ford via use-livecode wrote: Guess it's time to finally look into this. I just visited https://comodosslstore.com but am not sure of the differences between Comodo code signing, Microsoft Authenticode, etc... Any suggestions on best practices with LiveCode/Inno Setup

Re: Symantec quarantining LiveCode standalone on client's machine

Same here. Code signing your application will prevent this. On 7/2/2019 4:10 PM, Tom Glod via use-livecode wrote: Just wondering ..is your executable signed? I've come across this problem before with it being quarantined. avast does the "hold on a second let me check this out first" thing

Re: LC905rc1 Standalone Weirdness with External Stacks

On 6/28/2019 8:04 PM, doc hawk via use-livecode wrote: On Jun 28, 2019, at 8:24 AM, Paul Dupuis via use-livecode wrote: When the standalone opens the external stack (which could be in an older stack file format), when the mouse is in the external stack window, LiveCode thinks the mouse is

Re: LC905rc1 Standalone Weirdness with External Stacks

On 6/28/2019 6:47 PM, Bob Sneidar via use-livecode wrote: Also, if a stack is a part of the EXE, aren't the read only? In other words, you cannot save things like properties by saving the stack? Correct. But not a problem for our app as they are full desktop apps that read and write a variety

Re: LC905rc1 Standalone Weirdness with External Stacks

On 6/28/2019 12:48 PM, Dar Scott Consulting via use-livecode wrote: I don't know if this is related or not... I have seen the rectangle of the window off by a similar amount when it overlaps the LiveCode IDE toolbar. This is occurring in a a standalone, so I don't think the IDE toolbar is a

Re: Using shell as administrator on Windows 10

On 6/28/2019 1:23 PM, Glen Bojsza via use-livecode wrote: Hello, Is there a way to us LC shell to do commands as administrator? thanks, Glen ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe a

Re: LC905rc1 Standalone Weirdness with External Stacks

On 6/28/2019 2:08 PM, Richard Gaskin via use-livecode wrote: Paul Dupuis wrote: > We have an app we're porting to LC9 (currently doing internal beta > builds under LC9.0.5rc1) that we're seeing some weirdness when > external stacks are opened by the standalone. > > Th

Re: LC905rc1 Standalone Weirdness with External Stacks

are calling External Stacks. The Standalone (again to my mind) is simply the runtime engine glued to the main stack you compiled with it. All other stacks, including the ones referenced in the Stack Files of the main stack are simply opened like the IDE would. Bob S On Jun 28, 2019, at 08:2

LC905rc1 Standalone Weirdness with External Stacks

We have an app we're porting to LC9 (currently doing internal beta builds under LC9.0.5rc1) that we're seeing some weirdness when external stacks are opened by the standalone. This is happening under OSX. We've not seen it (so far) under Windows, but most of our initial QA testing is done unde

Re: CTD meaning?

On 6/28/2019 5:02 AM, Lagi Pittas via use-livecode wrote: Crash To Desktop? Yes. ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe, unsubscribe and manage your subscription preferences: http://lists.runrev

Re: Rects Revisted

On 6/26/2019 1:41 PM, Bob Sneidar via use-livecode wrote: So I am dealing with the rects of stacks vs. the rects of screens, and now I see what the issues people have had are all about. I have a window whose bottom is partially below the screen it is on. But item 4 of the rect of the stack is

Re: Groups do not receive mouseEnter messages?

There are clearly use cases where it makes sense for a group (such as it it just being used to contain or enclose a set of other controls) NOT to received mouse event messages. There are also use cases where it DOES make sense of a group to received mouse event messages, such as if you are usi

Re: Groups do not receive mouseEnter messages?

On 6/25/2019 4:11 AM, Mark Waddingham via use-livecode wrote: The behavior of groups re mouse messages (and the lack there of) has been the same as long as I can remember (which is back to around version 2.0). Warmest Regards, Mark. As always Mark, thank you. I have becomes so use to most

Re: "Drawing" is a reserved stack name?!?

On 6/25/2019 7:03 AM, panagiotis merakos wrote: There is the drawing library, which is an IDE stack. However its name is "com.livecode.library.drawing", not just "drawing". So this sounds like a bug in the IDE :) https://quality.livecode.com/show_bug.cgi?id=22205 _

Re: Groups do not receive mouseEnter messages?

On 6/24/2019 8:24 PM, dunbarx--- via use-livecode wrote: Confirmed here. I have never really tried any of the things you mentioned, but no messages at all are sent to the group I just made.  Interestingly, and consistent so far, double clicking within the group boundary, but not in any child co

Groups do not receive mouseEnter messages?

In LC9.0.5rc1 under Windows, I have a test stack with 2 opaque groups with show borders  - one covering the top half of the card and one covering the bottom half of the card. In side the top group are a couple buttons with plenty of white space around them and inside the bottom group are a coup

"Drawing" is a reserved stack name?!?

So before I report this as a "bug", I would appreciate if someone could confirm. Using LC9.0.4 and LC 9.0.5rc under Windows Open LC Make a new stack Make the stack name "Drawing" Save the stack as "Drawing.livecode" Make sure that your have View > Show IDE Stacks in Lists set to Off Exit LiveCod

Re: PDF Widget

On 6/24/2019 4:05 PM, Marty Knapp via use-livecode wrote: I was just playing with the new PDF widget in LC 9.5. You can insert a PDF and overlay other LC objects (very cool) and then print the card but the PDF portion prints at low resolution - or did I miss something? The same issue exist

Re: Help with drawing in LiveCode...

you post to the forum? I am much more comfortable there, and we can all propose handlers that will restore the old way. Did you try the handler I posted earlier? It is a good start. Craig -Original Message- From: Paul Dupuis via use-livecode To: use-livecode Cc: Paul Dupuis Sent:

Re: Help with drawing in LiveCode...

On 6/20/2019 11:34 PM, dunbarx--- via use-livecode wrote: I implemented a fairly complex drawing module to a stack we use all the time. It isn't CAD, but it looks like it, albeit rather less professional looking than, say, AutoCad or SoldWorks would produce. We send these drawings out daily to

Re: Help with drawing in LiveCode...

On 6/21/2019 4:54 AM, hh via use-livecode wrote: Here is a very simple drawing stack made once for testing the HTML5 standalone builder. http://hyperhh.de/html5/krikelKrakel2a-8.0.2X.html That could be a helpful example. Thank you, but how do I download the actual stack? ___

Re: Help with drawing in LiveCode...

On 6/20/2019 3:02 PM, dunbarxx via use-livecode wrote: Hi. Untested, but this is kluge time. Something like this in the card script, though I bet it can be made cleaner and more robust: on mouseLeave set the liveHandles of this cd to the name of the target select empty end mouseLeave

Help with drawing in LiveCode...

I have an old stack (built under LC 4.6.4) that has a component that does some simple drawing. There is a tool bar (some buttons and menus) and below that a drawing area (scrolling group) A mouseMove handler set the tool to the *pointer tool* when over the drawing area and back to the *browse

Re: dragData["private"] is not Unicode aware

On 6/18/2019 9:01 AM, Trevor DeVore via use-livecode wrote: On Tue, Jun 18, 2019 at 6:28 AM Paul Dupuis via use-livecode < use-livecode@lists.runrev.com> wrote: I should learn how to contribute to updating documentation myself, but I have tried setting up GIT on Windows twice without s

Re: dragData["private"] is not Unicode aware

On 6/18/2019 3:29 AM, Mark Waddingham via use-livecode wrote: On 2019-06-17 22:09, Paul Dupuis via use-livecode wrote: Folks (those who may have an interest at least): I just filed a bug: https://quality.livecode.com/show_bug.cgi?id=22192 Does this ("Private" NOT Unicode aware) s

dragData["private"] is not Unicode aware

Folks (those who may have an interest at least): I just filed a bug: https://quality.livecode.com/show_bug.cgi?id=22192 Essentially, I discovered in LC905rc1 that: For years you could do: set the dragData["private"] to "Some English Text" and then put the dragData{"private"] and get "Some Eng

Context menus (popup command) bugs...

I've run into a bug on Windows (and Linux) with regard to popup menus over a field using mouseMove or mouseWithin. https://quality.livecode.com/show_bug.cgi?id=22178 There are related bugs: https://quality.livecode.com/show_bug.cgi?id=7766 https://quality.livecode.com/show_bug.cgi?id=20695 The

Re: pdf widget initial thangers

On 6/10/2019 1:58 PM, Mike Kerner via use-livecode wrote: Paul, Have you reworked the xpdf example stack to use the widget? Are there any api additions/deletions between xpdf and the widget? Not yet, but it is on my to do list, probably starting next week? Perhaps the week after. I have some o

Re: pdf widget initial thangers

On 6/10/2019 12:02 PM, Mike Kerner via use-livecode wrote: anyone messing with the pdf widget, yet? Any thoughts about using it vs. xpdf? the xpdf external is Google PDFium wrapped as an External. the LC950 pdf widget is Google PDFium wrapped as a FFI widget. Expect that effectively the widg

Re: Big problems creating standalone

On 6/9/2019 9:28 AM, Klaus major-k via use-livecode wrote: Hi friends, I have an old stack with 18 substacks from 2012. I saved it in current format with LC 9.04 on macOS 10.14.5. I selected 64bit in the standalone application settings and tried to create a standalone, but had to cancel (CMD+.

Re: Player endTime is not respected!

Did you: set the playSelection of player to true Required to actually play from startTime to endTime and stop On 6/7/2019 9:52 AM, Rick Harrison via use-livecode wrote: Good Morning LC Users, I have a Player object that I have set the startTime and endTime for the movie. When I inspect the

Re: FFI & VLC Player

playback in LiveCode. For our apps we need the following media properties to work: currentTime, startTime, endTime, playSelection, playRate (with playRates from -n.n to 0 to +n.n) for both audio and video media. Paul Dupuis Cofounder Researchware, Inc. On 5/30/2019 11:10 AM, Tom Glod via use

Re: windowBoundingRect on multiple monitors? Is this a bug?

ngham via use-livecode wrote: On 2019-05-25 23:19, Paul Dupuis via use-livecode wrote: If you have resizable windows, it is logical to set the windowBoundingRect to the working screenRect, so that windows that are zoomed (OSX) or maximized (Windows) are limited to the area of the primary monito

Re: windowBoundingRect on multiple monitors? Is this a bug?

2019-05-25 23:19, Paul Dupuis via use-livecode wrote: If you have resizable windows, it is logical to set the windowBoundingRect to the working screenRect, so that windows that are zoomed (OSX) or maximized (Windows) are limited to the area of the primary monitor NOT being used for a menu bar or

windowBoundingRect on multiple monitors? Is this a bug?

With LC90x+ we have the screenRect (for the primary monitor), the screenRects (for multiple monitors and we can even use the 'working' keyword to get the screenRect less any OS reserved space for menu bar or task bar. Thus, if you have a set up with 2 monitors, the working screenRect returns

Re: Player object controller bar

On 5/25/2019 11:37 AM, Paul Dupuis via use-livecode wrote: On 5/25/2019 11:10 AM, Paul Dupuis via use-livecode wrote: If you are on Pause, the Forward and Rewind arrows step forward or backwards by  frame If you are on Play, the Forward and Rewind arrows fast forward or rewind (currently not

Re: Player object controller bar

On 5/25/2019 11:49 AM, Klaus major-k via use-livecode wrote: why not try by yourself? Your machine won't exlode, promised!:-D With this slider you can control the speed of playback: playback backwards <- drag left- drag right-> playback forward You miss my point. It should be documented. A Liv

Re: Player object controller bar

On 5/25/2019 11:10 AM, Paul Dupuis via use-livecode wrote: If you are on Pause, the Forward and Rewind arrows step forward or backwards by  frame If you are on Play, the Forward and Rewind arrows fast forward or rewind (currently not working under Windows in LC904/5) Play and Pause toggle

Re: Player object controller bar

On 5/25/2019 10:08 AM, Rick Harrison via use-livecode wrote: My experience with player controllers is that if you just want people to be able to use the built in controls, that should work fine. I just want to see a document that tell me what ALL the built in controls are. Are these all the

Re: how to load a local file into the browser widget?

On 5/25/2019 7:47 AM, Paul Dupuis via use-livecode wrote: On 5/25/2019 4:17 AM, Klaus major-k via use-livecode wrote: Sorry, I don't know, someone else needs to chime in here. Obvioulsy "Unicode, it just works" doesn't do with filenames. :-/ Our experience with LC90x h

Re: how to load a local file into the browser widget?

On 5/25/2019 4:17 AM, Klaus major-k via use-livecode wrote: Sorry, I don't know, someone else needs to chime in here. Obvioulsy "Unicode, it just works" doesn't do with filenames. :-/ Our experience with LC90x has been that Unicode DOES just work with filename, for 'open file , there is a fil

Player object controller bar

I have searched the dictionary, Guides, and livecode.com but have been unable to find a annotated picture of the LC9xx player objects' controller bar and what each control does, especially in combinations with with modifier keys Clearly, some controls are obvious, like play/pause, etc., but I

Re: Opening a stack changes it's set rect

Thank you Mark! On 5/24/2019 2:14 PM, Mark Waddingham via use-livecode wrote: On 2019-05-24 18:08, Paul Dupuis via use-livecode wrote: I discovered today that opening a stack changes its set rect (at least under Windows 10 in LC904/905rc1 when opening a stack invisible See this little gem

Re: App Store changes in August?

My guess would be the forth coming Notarization requirement by Apple? There was a lot of list discussion about that, but it has nothing to do with LiveCode. It is just another set of steps your will need to do, like Code Signing, for you OSX apps build in LiveCode or any language to run on OSX

Opening a stack changes it's set rect

I discovered today that opening a stack changes its set rect (at least under Windows 10 in LC904/905rc1 when opening a stack invisible See this little gem: https://quality.livecode.com/show_bug.cgi?id=22097 Not a problem is you are just popping up windows and then setting their positions, but

Re: Windows 64

If I recall correctly: Windows 2000 and XP were only 32-bit Windows Vista and WIndows 7 came in both 32-bit and 64-bit versions (you have to buy the version you wanted. They were sold separately) Windows 8, 8.1, and 10 are available ONLY as 64-bit OSes So, while Microsoft maintains 32-bit comp

Re: LC904rc2 Project Browser error?

9 12:40 PM, Geoff Canyon wrote: I installed 9.0.4 on a Mac, and it looks like there are several bugs still with drag and drop of groups. Did you file a bug for this issue? On Sat, Apr 27, 2019 at 12:17 AM Paul Dupuis via use-livecode mailto:use-livecode@lists.runrev.com>> wrote: Not

Re: The correct way to quit a Windows standalone

activesw.com HyperActive Software | http://www.hyperactivesw.com On May 23, 2019 8:14:59 AM Paul Dupuis via use-livecode wrote: If it is a requirement for any loaded fonts to be unloaded from memory for a Standalone to actually quit under Microsoft Windows then a bug should be entered at https://qualit

Re: The correct way to quit a Windows standalone

If it is a requirement for any loaded fonts to be unloaded from memory for a Standalone to actually quit under Microsoft Windows then a bug should be entered at https://quality.livecode.com/ to update the Dictionary entries for: closeStackRequest shutDownRequest quit start using font stop usin

Windows player playrate bug...

For those doing media under Windows (if any one out there is), I just identified that the playRate property is not working under Windows (tested under Windows 10). Busted in LC904 STABLE and 905 RC1, not sure how far back it broken. See bug: https://quality.livecode.com/show_bug.cgi?id=22075

Re: Seeking confirmation of a bug...

On 5/16/2019 7:35 PM, Richard Gaskin via use-livecode wrote: Paul Dupuis wrote: > I am sometimes astonished that a bug like this can go undetected > through so many releases. It causes me to worry about the adoption > of LC as a serious commercial application building tool. This is wh

Re: Seeking confirmation of a bug...

Thank you Monte! I just finished dinner and was sitting down to enter a new bug when I saw you had already done it! On 5/16/2019 6:30 PM, Monte Goulding via use-livecode wrote: On 17 May 2019, at 7:29 am, Monte Goulding via use-livecode wrote: I just added an updated test stack that sh

Re: Seeking confirmation of a bug...

ash is a merge at that time. It’s an easy fix though which is good ;-) Cheers Monte On 17 May 2019, at 5:26 am, Paul Dupuis via use-livecode wrote: Certainly there is a work around based on extensions. You and I have both written them for Researchware ;-) However, Jeanne used this f

Re: Seeking confirmation of a bug...

Paul On 5/16/2019 1:30 PM, Richard Gaskin via use-livecode wrote: Paul Dupuis wrote: > I just filed a serious bug for LC904 that is only under OSX. When > using 'asnwer file with type ' the selected type is > supposed to be returned in 'the result'. This works as expec

Re: Seeking confirmation of a bug...

On 5/16/2019 10:32 AM, Klaus major-k via use-livecode wrote: maybe the dictionary should read: "This list is ONLY displayed on Windows systems"? No it is displayed under OSX IF you specify more than one type (tag) not extensions. See my previous reply. Also this fails under LC903 but works a

Re: Seeking confirmation of a bug...

On 5/16/2019 10:26 AM, Klaus major-k via use-livecode wrote: answer file "sdsdds" with type "PNG, JPEG|png,jpg|" You only  tested with 1 type. Download the test stack from the bug report or try answer file "sdsdds" with type ("PNG Files|png"&cr&"JPEG Files|jpg") to actually have more than o

Seeking confirmation of a bug...

I just filed a serious bug for LC904 that is only under OSX. When using 'asnwer file with type ' the selected type is supposed to be returned in 'the result'. This works as expected under Windows, but under OSX using LC904 STABLE, 'the result' is the same as the 'it', both contain the file pat

Re: LC 9.04

On 5/14/2019 2:10 PM, Klaus major-k via use-livecode wrote: * ... * Browser Widget: Progress, isSecure and allowUserInteraction *... Looking at the link above, shows that these were moved

Re: Help with Pasting of RTL languages into a field

On 5/9/2019 12:15 PM, Paul Dupuis via use-livecode wrote: I have a  test stack with a single scrolling field under LC904rc2. The textDirection for the field is the default of "auto" meaning it should align LTR  languages (like English) to the Left and RTL languages (like Arabic or

Re: Question for LCB FFI workshop attendees at upcoming conference

On 5/10/2019 10:18 AM, Trevor DeVore via use-livecode wrote: Thanks for the suggestion Paul. This ended up being a really good example to work on. Wow! Thank you Trevor! I have slowly (far too slowly) been trying to develop my LCB expertise to wrap Sphinx, but the C side of things (building th

Help with Pasting of RTL languages into a field

I have a  test stack with a single scrolling field under LC904rc2. The textDirection for the field is the default of "auto" meaning it should align LTR  languages (like English) to the Left and RTL languages (like Arabic or Hebrew) to the Right. English and other LTR test is correctly Left ali

Re: Question for LCB FFI workshop attendees at upcoming conference

On 5/7/2019 1:14 PM, Paul Dupuis wrote: On 5/7/2019 9:35 AM, Trevor DeVore via use-livecode wrote: This is for anyone who plans on attending my workshop on using FFI in LCB at the conference. Is there any code (a macOS Framework, Windows API, DLL, dylib, etc.) that is written in Objective-C

Re: Question for LCB FFI workshop attendees at upcoming conference

On 5/7/2019 9:35 AM, Trevor DeVore via use-livecode wrote: This is for anyone who plans on attending my workshop on using FFI in LCB at the conference. Is there any code (a macOS Framework, Windows API, DLL, dylib, etc.) that is written in Objective-C or that has a C wrapper that you are interest

Re: Is Anyone using the XPDFViewer?

I looked at my working code. Every where I set the rect, I do so by:   XPDFViewer_Set "pdfViewer","RECT", rect of grc "pdfRect" of grp "pdfViewer" of me where the graphic "pdfRect is a rectangle that is used to to map the area the pdf viewer appears in. Try creating a graphic called whatev

Re: LC904rc2 Project Browser error?

issue (not relayering groups by drag and drop in the IDE project browser) in LC9.0.4rc2. On 4/26/2019 12:26 PM, Sannyasin Brahmanathaswami via use-livecode wrote: It may be "many moons" before they fix the PB. I hardly use any more. Get Geoff's Navigator! BR Paul Dupuis wrot

LC904rc2 Project Browser error?

I find that in the project browser under LC904rc2 (Windows 10), I can not relayer groups. Button, fields, etc, all relayer fine by drag and drop within the hierarchical list of the project browser, but not groups. Is this a bug or a lack of RTFM on my part to figure out how it is supposed to w

LC9.0.4rc2: Problem with Ask dialog not being included in standalone?

I just was creating a simple test stack under Windows 10, LC9.0.4rc2 and discovered that whether I allowed automatic selection of inclusions or explicitly included the Ask/Answer dialogs, the Ask dialog was not being included in my Windows standalone of this test stack. See https://quality.liv

Re: Upcoming MacOS 14.5 with software “notarization” requirements

On 4/10/2019 2:05 PM, J. Landman Gay via use-livecode wrote: I agree it's going to be an extra step. My hope is that once LC figures out how to secure their own IDE they can integrate that into the build process somehow. Maybe there could be an option after the standalone is made to submit it t

Re: Saving a tab formatted field to a file and retaining its formatting

Look at "revPrintField" in the Dictionary. If I recall, I think this can be used with the open printing to pdf command On 4/10/2019 12:46 PM, Robert J. Earp via use-livecode wrote: Richard, many thanks for the thought. If you mean the built-in “printing to pdf” then yes, but as far as I cou

Re: Upcoming MacOS 14.5 with software “notarization” requirements

From the first link to the Apple developer site: "Important Beginning in macOS 10.14.5, all new or updated kernel extensions and all software from developers new to distributing with Developer ID must be notarized in order to run. In a future version of macOS, notarization will be required by

Re: Saving a tab formatted field to a file and retaining its formatting

On 4/7/2019 9:00 PM, Paul Dupuis via use-livecode wrote: I take it your have tried: put the rtfText of field "X" into URL ("file:"&specialFolderPath("desktop")&slash&"savedfield.rtf") And then reading it back to a new fiel

Re: Saving a tab formatted field to a file and retaining its formatting

I take it your have tried: put the rtfText of field "X" into URL ("file:"&specialFolderPath("desktop")&slash&"savedfield.rtf") And then reading it back to a new field with: set the rtfText of field "Y" to URL ("file:"&specialFolderPath("desktop")&slash&"savedfield.rtf") and the tab spacing

Re: Property Palette

Thank you. On 4/3/2019 2:11 AM, Richmond via use-livecode wrote: 20701 Richmond. On 2.04.19 20:54, Paul Dupuis via use-livecode wrote: On 4/2/2019 1:43 PM, Richmond via use-livecode wrote: The bug has been reported several time by several people, and "we" have been reassured t

Re: MouseMove less responsive in 9.0.4

On 4/2/2019 8:23 AM, Michael Kristensen via use-livecode wrote: Hi there There is a definite degradation of the moseMove responsiveness here Could you please investigate to determine if it also is true for you I created a test stack with a 32px square button and the following card script:

Re: Property Palette

On 4/2/2019 1:43 PM, Richmond via use-livecode wrote: The bug has been reported several time by several people, and "we" have been reassured that it is being dealt with . . . What is the bug number? I'd like to CC myself on the bug to follow any progress. ___

Any reason to use Apple file TYPE codes anymore?

In Livecode you can use file extensions (like .txt) or apple 4-character file type codes (like "TEXT") in a "type" or "types" filter of the answer file command. As in: answer file[s] prompt [with defaultPath] [with type types [or type types ...]] windowTitle] [as sheet] Where a "types" is li

AW: Re: Apple Video Foundation (AVF) and .mpg files

ot; ) Richmond. On 26.03.19 23:28, Paul Dupuis via use-livecode wrote: Richmond, I good suggestion. Thank you. However, looking at an identical video clip encoded as MPEG-1 and as MPEG-2 in a test editor shows lots of gibberish and no obvious text tags to tell the encoding. Unfortunately, I don

Re: Apple Video Foundation (AVF) and .mpg files

as to whether it is encoded as MPEG-1 or MPEG-2. Useful samples here: http://hubblesource.stsci.edu/sources/video/clips/ Richmond. On 26.03.19 22:32, Paul Dupuis via use-livecode wrote: Livecode 9.x.x uses Apple Video Foundation (AVF) for the LC Player object under OSX. AVF supports MPEG-1 vide

Re: Apple Video Foundation (AVF) and .mpg files

rmine encoding from that OR use some shell wizardry to tell the encoding? On 3/26/2019 5:05 PM, Rick Harrison via use-livecode wrote: I also supports .mp4 which is MPEG-4 if that helps. Rick On Mar 26, 2019, at 4:32 PM, Paul Dupuis via use-livecode wrote: Livecode 9.x.x uses Apple Video Found

Apple Video Foundation (AVF) and .mpg files

Livecode 9.x.x uses Apple Video Foundation (AVF) for the LC Player object under OSX. AVF supports MPEG-1 video but not MPEG-2 video. Both MPEG-1 and MPEG-2 use the .mpg file extenstion. Question for any media geniuses on this list: Is there a way in LiveCode to tell a MPEG-1 .mpg file from a MP

<    3   4   5   6   7   8   9   10   11   12   >