Hi Melanie,
with KVM it works (but I'm not aware of Xen atm) - you set upper limits for
number of bytes per sec and IOs per seconds for both read and writes, on
Disk Offering (and Compute offering) by defining HyperVisor QoS values.
Example for manual play:
when no
> other volume have it as a backing image.
>
> regards,
> Ran
> On 11/22/2018 12:53 PM, Andrija Panic wrote:
> > Hi Run,
> >
> > not sure what you mean (I did not quite understand your explanation) -
> but
> > here is an exercise from my side (just don
children in
> this case(revert from snapshot).
>
> regards,
> Ran
>
> On 11/19/2018 10:43 AM, Andrija Panic wrote:
> > new template, deployed new VM, destroyed VM (with Exunge option)...
> >
> > up to 120sec later... (storage.cleanup.interval=120 sec, global c
As an alternative, we use HaProxy in front of ACS, with terminating SSL on
HaProxy cluster
Cheers
On Wed, Nov 21, 2018, 20:06 Rene Moser Hi Rich
>
> We use nginx in front of cloudstack as a HTTP and SSL proxy. It is much
> easier to setup.
>
> Regards
> René
>
>
>
> On 11/21/18 7:31 PM,
Hi Richard,
you are looking for 1 click deploy from within CloudStack ? That is not
possible actually. You do need to deploy VPC, then networks, then VMs etc.
But you could automate this via CloudMonkey (CLI on Linux) or perhaps do
API calls to provision all needed resources - CloudStack provides
thx!
On Tue, 20 Nov 2018 at 15:07, Jean-Francois Nadeau
wrote:
> We did a quick test with HyperV 2016 under 4.9.3 and some APIs changed in
> hyperv we believed prevented us to deploy a zone correctly. We did not
> investigate further.
>
> On Tue, Nov 20, 2018 at 6:18 AM Andrija
Hi all,
anyone has experience with running Hyper-V with CloudStack, what is feature
set supported (or more importantly not supported), what versions actually
work (HyperV 2016 or not), etc.
Any info, would be appreciated.
--
Andrija Panić
m not over provisioning my CPU Mhz.
>
> > On 11/19/18, 6:43 AM, "Andrija Panic" wrote:
> >
> > Unless someone gives you better answer, I guess it's for fun - to
> have more
> > detailed numbers in dashboard (may be it's related to other
> hypervi
have this value set to 3.0. Right now, one of my servers with 32 cores @
> 2.0 GHz (with HT enabled), I can allocate a total of 79 vCPU and 139 GHz to
> 26 VM instances. That's over 200% over provisioning!
>
> Yiping
>
> On 11/19/18, 6:43 AM, "Andrija Panic" wrote:
>
ory).
> Are you sure it's the core count preventing you from starting VMs? What do
> the logs say? (Also keep in mind your system VMs are now using more
> resources that before).
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
>
> On 19/11/2018, 17:15, &
[c.c.t.TemplateManagerImpl]
(StorageManager-Scavenger-2:ctx-f9dd338d) (logid:9ae40975) Successfully
evicted template andrija-test-tmpl from storage pool null
template "andrija-test-tmpl" deleted...
Hope that helps Run.
Cheers
Andrija
On Mon, 19 Nov 2018 at 19:11, Andrija Panic wrote:
> True (at l
gh CPU capacity" or in
similar fashion...
(this is clean install though...)
Please check your "cluster.cpu.allocated.capacity.disablethreshold" both in
Global Settings, and on particular Cluster level.
Cheers
On Mon, 19 Nov 2018 at 19:12, Andrija Panic wrote:
> Let me te
VMs? What do
> the logs say? (Also keep in mind your system VMs are now using more
> resources that before).
>
> Regards,
> Dag Sonstebo
> Cloud Architect
> ShapeBlue
>
>
> On 19/11/2018, 17:15, "Eric Lee Green" wrote:
>
>
> On 11/19/18 03:56
; wrote:
>
> Hi Andrija,
>
> Thanks for the clarification and quick response
>
> regards,
> Ran
>
> On 11/16/2018 02:15 PM, Andrija Panic wrote:
> > Hi Ran,
> >
> > templates stays on Primary Storage "forever", a
>
> IMO having the total number of cores is still useful information - same as
> total number of hosts and memory. Yes we know these are total numbers - but
> still gives you an idea of the capacity of your compute nodes.
>
> Regards,
> Dag Sonstebo
> Cloud Architec
fore I wondered if it is limiting
> the fact of reaching or exceeding the number of physical cores.
>
> What is the purpose of this dashboard pane?
>
>
> Il 19/11/18 12:56, Andrija Panic ha scritto:
> > Hi Ugo,
> >
> > Why would you want to do this, just cur
Hi Ugo,
Why would you want to do this, just curious ?
I believe it's not possible, but anyway (at least with KVM, probably same
for other hypervisors) it doesn't even makes sense/use, since when
deploying a VM, ACS query host free/unused number of MHz (GHz), so it's not
even relevant for ACS -
Hi Ran,
templates stays on Primary Storage "forever", at least for NFS (they are
moved from Secondary to Primary when you deploy a very first VM from
specific template). All VMs have this templates qcow2 as baking (parent)
image.
This template is a qcow2 copy of a file from Secondary Storage -
file this request, in Github or the original Apache's
> > CloudStack Jira?
> >
> > Yiping
> >
> > On 11/15/18, 2:27 PM, "Andrija Panic"
> wrote:
> >
> > I believe (if not mistaken) that CloudStack will match firs
k Jira?
>
> Yiping
>
> On 11/15/18, 2:27 PM, "Andrija Panic" wrote:
>
> I believe (if not mistaken) that CloudStack will match first available
> storage based on storage tags and availability, and will always choose
> first storage pool, even
Yes, check the firewall thing - it can cause many different issues if not
correctly configured... I have recently had some fun because of iptables...
On Fri, 16 Nov 2018 at 11:04, Adam Witwicki wrote:
> Sorted with sudo ufw default allow FORWARD
>
> Thanks guys :)
>
> -Original Message-
I believe (if not mistaken) that CloudStack will match first available
storage based on storage tags and availability, and will always choose
first storage pool, even though you have 3 of them available for particular
cluster.
In this sense, you can not really balance load across multiple Primary
, 14 нояб. 2018 г. в 14:37, Andrija Panic :
>
> > I have just single pod/subnet in a Zone so it's regular stuff,
> multicast...
> >
> > I'm also curious how this would span to multiple subnets in production -
> I
> > did have a chat with my networking colleague back
ool stuff.
>
> Do you run it with multicast or BGP EVPN? Looks like multicast is not the
> best approach for large-scale deployments.
>
> ср, 14 нояб. 2018 г. в 13:38, Andrija Panic :
>
> > Simon just explained it well - and a few additions from my side, in case
> it
Simon just explained it well - and a few additions from my side, in case it
helps
Read details in this page, in order to avoid some hard issues during later
production (beside MTU, check the max_igmp_membership etc...)
http://docs.cloudstack.apache.org/en/4.11.1.0/plugins/vxlan.html
Here is
depending on the needed scenario and
> > > allowed
> > > > downtime.
> > > >
> > > > Perhaps look into xcp-ng project (fork of XenServer) without all
> these
> > > > limitations that Citrix imposed lately...
> > > >
> > > > Ho
On Sun, Nov 11, 2018, 04:42 kotipalli venkatesh <
venkateshcloudt...@gmail.com wrote:
> Hi
>
> Will you please suggest 3rd party sync tools.
>
> Thanks,
> Venkatesh
>
> On Sun 11 Nov, 2018, 3:34 AM Andrija Panic
> > ok, so this rules our any CloudSta
Hi Alessandro,
may I ask which tutorial / or which doc did you follow (Quick install
guide, or full install gude...)
Basic Zone or Advanced, CLoudStack version, KVM hypervisor flavour
(ubuntu.centos, etc)
So a bit more details please.
Later there are more questions like:
- inside Infrastructure,
nserver 7.2.
>
> No more cloudstack. He having own hypervisors.
>
> Thanks,
> Venkatesh
>
>
>
>
>
> On Sun 11 Nov, 2018, 2:39 AM Andrija Panic
> > Hi Venkatesh,
> >
> > is this 2 separate regions / installations - i.e. not 2 zones inside
Hi Venkatesh,
is this 2 separate regions / installations - i.e. not 2 zones inside same
Region ?
On Sat, 10 Nov 2018 at 21:35, kotipalli venkatesh <
venkateshcloudt...@gmail.com> wrote:
> Hi All,
>
> We are using cloudstack older version 4.3.1 and hypervisor is xenserver
> 6.2.
>
> Now, we are
Cool, happy to hear that!
On Sat, Nov 10, 2018, 20:21 Ivan X Yue Hi, Andrija,
>
> Our problem is exactly the one that you found. After we apply the patch,
> it works very well.
>
> Thanks a lot for the help.
>
> Thanks
> Ivan
>
>
>
> From: Andrija Panic
&
y
> >> running tasks?
> >>> And then try add the rules again.
> >>>
> >>> Regards
> >>> Glenn Wagner
> >>>
> >>>
> >>> glenn.wag...@shapeblue.com
> >>> www.shapeblue.com
> >>> Winte
afaik, if ti's the same stuff - then it's here:
https://issues.apache.org/jira/browse/CLOUDSTACK-
cheers
On Fri, 9 Nov 2018 at 06:00, Ivan X Yue wrote:
> We are using CloudStack 4.9.3.1. We are using advance networking, and
> create VPC network with multiple guest networks. Each guest
Hi Ugo,
I have seen similar issues with i.e. starting a VM when there are other
long running jobs - check if there are any ongoing long jobs already, that
might be blocking the executioon of this job - i.e. long running snapshots,
or other thing.
I would also examine agent.log on the host where
Good stuff (btw I have been using old password init and MSI installer for
win2016 and it works just fine for me).
Cloudinit also supports automatic resize of root partitions/filesystem on
boot (usefull when you deploy VM from small template but choose to make
root disk bigger during vm creation).
Hi,
so ACL doesn't really affect LB as far as I know and can tell - i.e. if you
do LB port 80, you can not really filter who can connect to it...everyone
can connect !
Why? - it's about implementation, which you can check below, in case you
have free time to read :)
Port Forwarding or Static
Could you please try with 4.11.2 RC release? Did you send an email on DEV
list with link to GitHub?
On Sun, Nov 4, 2018, 22:29 Eric Lee Green Yeah, had all sorts of problems with custom network offerings after
> upgrading to 4.11.1, along with problems with launching virtual machines
> (every
Assuming I may vote:
+1 from my side
Tested:
- building DEB packages for Ubuntu
- advanced and basic zone deployment (KVM, clean install 4.11.2)
- upgrade from 4.8.0.1 to 4.11.2
- a bunch of integration tests done from in-house suite of tests (system
and user tests) - all PASS, with exception
s with it , like attach disk to a VM.
>
> Best regards,
> N.B
>
> -Message d'origine-
> De : Andrija Panic [mailto:andrija.pa...@gmail.com]
> Envoyé : mercredi 31 octobre 2018 18:45
> À : users
> Objet : Re: Upload Data Volume
>
> Login inside SSVM in destina
Login inside SSVM in destination CloudStack and try to wget the volume as
suggested in previous email. See if that works first.
Best
Andrija
On Wed, Oct 31, 2018, 18:36 Nicolas Bouige wrote:
> Nope, i exported the .vhd manually from my Xen pool and put it in a
> webserver to be download by
qemu64 working with
> guest.cpu.mode=host-model and not working with guest.cpu.mode=custom.
>
> BR
> Alexander
>
> -Ursprüngliche Nachricht-
> Von: Andrija Panic
> Gesendet: Dienstag, 30. Oktober 2018 13:30
> An: users
> Betreff: Re: KVM Custom CPU-Model
>
&
Hi Alex,
based on CPU_map.xml, qemu64 CPU model requires (presents to Guest) the SVM
flag, which is the AMD things as you know (not sure why though...)
Here is the info:
root@ix1-c7-4:~# cat /usr/share/libvirt/cpu_map.xml| grep qemu64 -A36
t; dns-domain domain.com
> bridge_fd 5
> bridge_stp off
> bridge_maxwait 1
>
> #auto cloudbr0:1
> #iface cloudbr0:1 inet static
> # address 192.168.160.190
> # netmask 255.255.255.0
>
>
> This server is a single seve
m businesses with a reliable system that,
> in the case of issues, loses as little work as possible.
>
> On Sun, Oct 28, 2018 at 6:00 AM Andrija Panic
> wrote:
>
> > I'm not sure what is your use case - what you want to achieve - but make
> > sure to test this thoroughly
>
hypervisor to also act as NFS storage on the
> secondary IP.
>
> This secondary IP is also making the connection to the management
> server, maybe this is providing the issue.
>
> I have removed the secondary ip and will try again
>
>
> On 29-10-18 14:51, Andrija Panic wro
. template/2 is the cloud admin account, and so on...
cheers
On Mon, 29 Oct 2018 at 14:51, Andrija Panic wrote:
> Go to Infrastructure --> Zones --> ZONE_NAME --> Physical Networks -->
> NAME_of_SECONDARY_STORAGE_NETWORK - if you used dedicated STORAGE network,
>
Go to Infrastructure --> Zones --> ZONE_NAME --> Physical Networks -->
NAME_of_SECONDARY_STORAGE_NETWORK - if you used dedicated STORAGE network,
otherwise it's shared with the Management Network, so go to this one, and
than again click on "Storage" button again and make sure KVM traffic label
is
l snapshots from
> KVM directly instead of going through Cloudstack.
>
> Is there anything that would stop this from working?
>
> On Fri, Oct 26, 2018 at 4:15 PM Andrija Panic
> wrote:
>
> > Yes.
> >
> > There are improvements being done atm, (afaik), to try to
gt; Alexandre Bruyère
>
> -Original Message-
> Re: Questions on snapshots
> From: Andrija Panic
> To: users
> Friday, October 26, 2018 at 3:38 PM
>
> So :)
>
> 1. Snap interval - scheduled snaps are max 1h per the so called "hourly"
> schedu
but exists :)
)...
Optionally change Internal DNS to also 8.8.8.8 or any public, disable zone,
destroy SSVM/CPVM, enable zone and check ssvm again...
On Fri, 26 Oct 2018 at 21:45, Andrija Panic wrote:
> Well for the beginning - destroy the SSVM and it will be recreated in few
> tens of seconds...
018 at 21:35, Alexandre Bruyere
wrote:
> NFS was not in fact mounted. How'd I fix that?
>
> (Thanks a lot for the help)
>
> On Fri, Oct 26, 2018 at 3:26 PM Andrija Panic
> wrote:
>
> > my typo on key name - name of the key (my installation) is
> > "/ro
So :)
1. Snap interval - scheduled snaps are max 1h per the so called "hourly"
schedule - so makes sense :) You could do some automation, by creating
manual snapshots and deleting oldest ones via automation - i.e. you can
use Cloud Monkey, CLI utility that talk to API and is great for any kind
se the console.
>
> Adding that template doesn't seem to work.
>
> On Fri, Oct 26, 2018 at 2:47 PM Andrija Panic
> wrote:
>
> > Just tested URL above, with normal (not direct) download, and it works
> > fine. (ACS 4.11.2 RC3)
> >
> > Did you check the health of th
26 Oct 2018 at 20:47, Andrija Panic wrote:
> Just tested URL above, with normal (not direct) download, and it works
> fine. (ACS 4.11.2 RC3)
>
> Did you check the health of the Secondary Storage Virtual Machine - I
> would suggest to do so, since this seems as possible issue w
ess in UI, no status.
> >
> > How would I make sure there are no redirections? At a glance there
> doesn't
> > seem to be any.
> >
> > On Fri, Oct 26, 2018 at 12:33 PM Andrija Panic
> > wrote:
> >
> >> Make sure no http redirections, no ssl suppor
Make sure no http redirections, no ssl support (not sure if https URLs are
supported now in 4.11 or not). Only plain http adn status code 200 :)
Do you see percentage /download progress in UI ?
On Fri, Oct 26, 2018, 18:20 Alexandre Bruyere
wrote:
> Hello.
>
> I've set up a Ubuntu 16.04.5
io Technologies
>
> ----- Original Message -
> From: "Andrija Panic"
> To: "users" , "jordan"
> Sent: Thursday, 25 October, 2018 11:23:23
> Subject: Re: FRESH install Cloustack 4.11 CentOS7 XEN6.5 SECONDARY STORAGE
> 0.00KB (URGENT)
>
> I've made a pull request to update the Quick Installation Guide with an
> > example of commands you can use to configure the firewall.
> >
> > On Wed, Oct 24, 2018 at 8:07 AM Andrija Panic
> > wrote:
> >
> >> I assume a bit late (just a few mon
Hi,
that is the famous setup article from one of CloudStack conferences, if I'm
not mistaken - but since things have changed "a bit" during last 4 years
(both cloudstack and the XenServer versions), that means that probably some
steps might be missing (just a guess)
Anyway, since system VM is
I assume a bit late (just a few months :) - but for sake of other list
members - had exactly the same case, because of FIREWALL on CentOS 7
- dashboard shows ZERO capacity, since SSVM is NOT functional - because
agent inside SSVM could not connect to Management Server - because of
FIREWALL...
-
You could probably use dedication, i.e. dedicate first cluster to the ROOT
domain (or other domain where your accounts/users are), so all resources
(VMs actually) will be by default created on this cluster which is
dedicated to the domain.
Other cluster, you make public (i.e. NOT dedicated) - and
Hi Andrei,
upgrading packages (it should defaults to keep your current configuration
file ?) will usually save a .rpmsave file. or dpkg-old (like you already
have it - I assume during last upgrade...)
Anyway, so far, whenever you restart agent, it will get overwritten again
with just plain
check using the commit ID:
>
>
> https://github.com/apache/cloudstack/commits/a8e53d0e9674028973c8f3a98a5a8ff15b24f5da
>
>
> The tag 4.11.2.0 will only be pushed once RC3 voting passes.
>
>
> - Rohit
>
> <https://cloudstack.apache.org>
>
>
>
> ___
Hi all,
Can someone point me to tag/release URL, last thing I see
is 4.11.2.0-RC20181017T1751?
https://github.com/apache/cloudstack/commits/4.11.2.0-RC20181017T1751
Thx,
Andrija
On Thu, Oct 18, 2018, 13:52 Paul Angus wrote:
> Uggh cut and paste fail!
>
> Yes 26th October - end of next week.
Can you please make sure that the Agent is up and running - check agent
logs etc ?
This has nothing to do with "SSVM cant talk to Secondary Storage" (actually
this can be checked/tested with existing script from inside SSVM, once SSVM
has been started)
It might be capacity issue (though it's
> (qtp1386767190-15:ctx-0e54785c ctx-ee01f7ae) (logid:1a5a07f0) can't
> >> setup
> >> > agent, due to com.cloud.utils.exception.CloudRuntimeException: Failed
> to
> >> > setup keystore on the KVM host: 204.168.1.51 - Failed to setup
> keystore
> >>
.java:820)
> > at
> >
> com.cloud.resource.ResourceManagerImpl.discoverHosts(ResourceManagerImpl.java:606)
> >
> >
> > ---
> > To Simon:
> > Fully plan on migrating to CentOS 7.x or Ubuntu Server LTS - this is
> > merely a
rather than 6.x, as Centos/RHEL development is targeted towards that
> release now and has been for a couple of years.
>
>
> - Si
>
> ________
> From: Andrija Panic
> Sent: Wednesday, October 17, 2018 10:51 AM
> To: users
> Subject: Re: Problems c
Hi Alexandre,
irrelevant to your explanation above (which is good, to understand whole
setup!), there is something with network configuration on the Zone level, I
assume, per the message from the script:
https://github.com/apache/cloudstack/blob/master/agent/bindir/cloud-setup-agent.in#L76
Any changes inside VR are not persistent, so next restart - you loose all
customisation. Now, if that VR rules works, you COULD technically pull some
magic with Jenkins job and some python scripting to connect to the VR and
determine if needed rules are in place, and if not, to aplly them...(some
g was to change the type of Xen Template.
>
> Cheers
> Grégoire
>
> -Message d'origine-
> De : Andrija Panic [mailto:andrija.pa...@gmail.com]
> Envoyé : vendredi 12 octobre 2018 20:48
> À : users
> Objet : Re: System VM version - CS 4.11.1
>
> Hi,
&g
Hi,
check the global variables router.template.kvm and
router.template.xenserver they should have the value of the exact name
of the new systemVM templates as you registered them...
Let us know if this fixes the issue.
MGMT server will need to be restarted...
Cheers
Andrija
On Fri, 12 Oct
en any past action may have failed.
>
>
> - Rohit
>
> <https://cloudstack.apache.org>
>
>
>
>
> From: Andrija Panic
> Sent: Wednesday, September 19, 2018 8:56:51 PM
> To: users
> Subject: Re: Network "restart required - yes"
>
tail” table in the database, where XXX
> is the 3 digits in the internal VM name i-83-XXX-VM
>
> INSERT INTO `user_vm_details` (`vm_id`, `name`, `value`, `display`) VALUES
> (xxx, 'rootDiskController', 'virtio', 1);
>
> Start the VM and all is good
>
>
> Thanks for eve
Each sysem VM have a single (at minimum) public IP address attached:
- cpvm need it to enable your laptop/you access to the console of the VM
from anywhere on internet (its authenticated)
- ssvm need it to download templates from internet (and offer you download
link when you download i.e.
ptember 21, 2018 5:28 AM
> To: users@cloudstack.apache.org
> Subject: RE: Disk controller type
>
> Win 2016 doesn’t use Virtio by default, but we need too as disk
> performance is rubbish if we don’t
>
>
>
>
> -Original Message-
> From: Andrija Panic
> S
ID controller.
>
> I am trying to work out why this happened and now I can make the disk
> template always select the VirtIO controller.
> Setting the instance to windows PV causes BSOD on boot, well before hal
> can be redetected
>
>
> Thanks
>
> Adam
>
> ---
SET
> removed=now() for the vms in the db to make them disappear in CD.
>
> I did not know that ip relocation remained for those VMs so setting it to
> NULL did the job.
>
> Thank you!
>
> Best regards,
> Jordan
>
> -Original Message-
> From: Andrija Panic [mailto:a
Did you try disabling the zone first, delete ssvm and cpvm? Then try to
delete it...
Otherwise, you can check the DB, there is table named user_ip_address (from
top of my kind, not sure of name) and there you can check if any public IP
is assigned etc.
Best
Andrija
On Thu, Sep 20, 2018, 15:24
Sooo... here is my experience:
if using correct VirtIO OS TYPE (set on template/VM) - i.e. ubuntu 14.04,
Centos 6.x or 7.x, Windows PV, other PV (but NOT centos 6.0 or 7.0 - these
"dot zero" versions are NOT virtio at least in ACS 4.8), then when VM is
STARTED FROM ACS (power on VM) - all drives
ed in the VR after the reboot.
> Restart network with cleanup (in the VPC) will destroy and recreate the VR.
>
> On Wed, Sep 19, 2018 at 12:35 PM, Andrija Panic
> wrote:
>
> > Hi Rafael,
> >
> > thanks a lot for digging into code - I undestand possible situations now
&g
ling restart as a part of VPC "
>
> On Wed, Sep 19, 2018 at 10:42 AM, Simon Weller
> wrote:
>
> > Without digging into the code, I believe that the VR reports the version
> > and it's matched against the min version. i'm not sure what happens if
> the
> > version
ecently? And if so, did you rebuild the rpms, or manually place the image
> or iso?
>
>
> - Si
>
> ________
> From: Andrija Panic
> Sent: Wednesday, September 19, 2018 8:35 AM
> To: users
> Subject: Re: Network "restart required - yes&qu
wrote:
> Andrija,
>
>
> Is this isolated to that particular VPC, or is this across the entire
> zone? What's the minreq.sysvmtemplate.version global set to?
>
>
> - Si
>
> ________
> From: Andrija Panic
> Sent: Wednesday, September 19, 20
e is this appearing? In the network 'state' field?
>
> On Wed, Sep 19, 2018 at 9:28 AM, Andrija Panic
> wrote:
>
> > Hi all,
> >
> > does anyone know it means when on the Network tab (this is VPC network)
> it
> > says "Restart Required - yes" ?
> &g
Hi all,
does anyone know it means when on the Network tab (this is VPC network) it
says "Restart Required - yes" ?
(the VR is using latest, up-to-date template just FYI).
Thanks,
--
Andrija Panić
> Virtio-SCSI (64-bit) otherwise, vm disk will created as an IDE Device.
>
> Afther changing the setting i got my Performance and a well working
> environment.
>
>
> Kind regards
>
> Ben
>
> >
> > Andrija Panic hat am 5. August 2018 um
> 11:05 gesch
We are using original one (cloud instance manager) sucessfully - at least
on older template (from say 8 months ago...) - not sure if versions have
been changing or not - here is what we use (version check)
https://snag.gy/prZTPB.jpg so you can try ti compare... Unless some new
mega security by MS
hen a VR is using IPs out of more than one
> ip range?
>
> Best regards,
> Swen
>
> -Ursprüngliche Nachricht-
> Von: Andrija Panic [mailto:andrija.pa...@gmail.com]
> Gesendet: Mittwoch, 18. Juli 2018 16:49
> An: users
> Betreff: Re: add new ip range to
using vxlan as isolation method for advance network ?
On Fri, 20 Jul 2018 at 11:29, Daan Hoogland wrote:
> On Fri, Jul 20, 2018 at 9:09 AM, ilya musayev <
> ilya.mailing.li...@gmail.com>
> wrote:
>
> > Have you tried destroying router vm and let CloudStack create new one ?
> >
> yes, or
Maybe here:
https://cloudstack.apache.org/trademark-guidelines.html
https://www.brandeps.com/logo/A/Apache-CloudStack-01
.ai files (from first link are Adobe Ilustrator vector files), and seems
that can be converted to EPS even with some online tools (but I guess
designer has the right tools
for NAT to a VM private IP is there anyway in the IP address
> firewall configuration to deny certain traffic as well as permit traffic.
>
>
> Jon
>
>
> ________
> From: Andrija Panic
> Sent: 18 July 2018 16:17
> To: users
> Subject:
Hi Adam,
unless something has changed in most recent version (doubt that) - no, you
can only define one CIDR in each ACL rule, which, if creating
egress/outbound rule is considered as destination IP/CIDR to which you
alow/deny access from your VPC network, or if using ingress (inbound) rule,
then
Bunch of Public IP ranges, again in same VLAN... (gateway is just an
virtual inteface on physical router...all virtual interfaces in same vlan)
On Wed, 18 Jul 2018 at 14:28, Nicolas Bouige wrote:
> Hi Rafael,
>
> yes, we had the situation but both ranges of public IPs was already in the
> same
HttpS links were not supported (at least up to 4.8 release - I have to
always use plain HTTP).
Cheers
On Mon, Jul 16, 2018, 12:43 Paul Angus wrote:
> Hi Adam,
> Have you tried this with 4.11.1?
>
>
> Kind regards,
>
> Paul Angus
>
> paul.an...@shapeblue.com
> www.shapeblue.com
> 53 Chandos
Hi Adam,
can you try volume name without underscores ?
Andrija
On Fri, 13 Jul 2018 at 10:21, Adam Witwicki wrote:
> Hello
>
> I cant seem to upload (add) a qcow2 volume via a URL, any ideas or other
> methods? we really need to import other systems disks.
>
> I get this in the logs
>
>
ACS doesn't handle this in any way (except that it might reserve the IP, so
it's not possible to add same IP to another VM/nic in same network).
You need to manually configure secondary IP on the VM - this is at least in
4.8 release, and per my experience so far.
Cheers.
On Wed, 11 Jul 2018 at
If this is advanced networking (VPC), then just restart VPC and it should
bring up a new router. For me (4.8), restarting network actually never did
anything (for whatever reason...).
Cheers
On Wed, Jul 11, 2018, 09:28 Boris Stoyanov
wrote:
> If you restart your network cloudstack will create
we have lots of hyper-v GEN2 boxes we
> need to import.
>
> I have found one bootloader on a CD that will boot the windows OS, but am
> having a nightmare getting this installed on the first HDD
> https://sourceforge.net/projects/cloverefiboot/
>
> Thanks
>
> Adam
&g
Just FYI, we are managing this via custom user Portal (portal does initial
user provisioning as well as i.e. demo VPC etc, lots of possibilities from
Portal side...) and it has account mapping from itself to ACS users, etc -
this all done because we are public IaaS provided, so for billing/usage
801 - 900 of 1420 matches
Mail list logo