[ovirt-users] Re: engine-iso-uploader taking a REALLY long time

Il giorno mer 6 feb 2019 alle ore 02:31 ha scritto: > I appreciate the responses. I think we should probably add to this page > that ISO domains are deprecated since it does not seem to be found anywhere > here. > > >

[ovirt-users] Re: Changing CPU type from Opteron G3 to Epyc with hosted engine in 4.3

On Tue, Feb 5, 2019 at 8:24 AM Juhani Rautiainen wrote: > Hi! > Now that I have engine and nodes on 4.3 level I'm stuck on upgrading > the CPU type. What is the correct way to solve this problem? So it seems that I have to reinstall the whole cluster because usually the silence means that there

[ovirt-users] Re: sun.security.validator

Did you ever get an answer to this? I am experiencing the same issue after: 1) Updating the BIOS on my system to the latest one 2) Installing a new 10GbE NIC Both the BIOS update and the NIC installation completed without incident, but I am getting the exact same error. Any advice out

[ovirt-users] Re: engine-iso-uploader taking a REALLY long time

I appreciate the responses. I think we should probably add to this page that ISO domains are deprecated since it does not seem to be found anywhere here. https://www.ovirt.org/documentation/install-guide/chap-Configuring_Storage.html ___ Users mailing

[ovirt-users] Re: rebooting an ovirt cluster

Incidentally, at least so far, ovirt-node-4.3 is going much better (for the installation anyway). The documentation for hyperconverged does not mention anything about setting up cockpit though, so you have to manually enable and start it, and if you're not using ipv6, you have to modify the

[ovirt-users] ovirt-4.3 hyperconverged deployment - no option for "disc count" for JBOD

Vanilla install of ovirt-node-4.3 (iso). During hyperconverged wizard, there is no option for disc count for JBOD. This results in error during deployment. Disc Count option is available for all other raid levels. -- _ Fact: 1. Ninjas are mammals. 2. Ninjas fight ALL the time. 3. The purpose

[ovirt-users] Re: Suggestions on adding 1000 or more networks to an engine/hosts

Thanks for sharing this, I created Bug 1672762 - Failed to add many networks to a labeled network interface https://bugzilla.redhat.com/show_bug.cgi?id=1672762 to track this. On Tue, 05 Feb 2019 17:42:41 - "Brian Wilson" wrote: > Circling Back Around with Log Collections on the Results of

[ovirt-users] Re: Version 4.3.0 installed, but shows 4.2.8

I was booting the iso image from the remote console of the idrac (virtual media), but I had a pendrive connected to the server with version 4.2.8. The installation of version 4.3.0 only started on the first screen, on the rest, it was 4.2.8. Disconnect the pendrive, and solved.

[ovirt-users] Re: Version 4.3.0 installed, but shows 4.2.8

My apologies to all! It was a mistake of mine! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct:

[ovirt-users] oVirt 4.3 node-ng host kernel options for nvidia vGPU

Hi, One of our projects wants to try offering VMs with nvidia vGPU. My co-worker had some problems before, so I thought I'd try the latest 4.3 ovirt-node-ng. In the "Edit Host" -> kernel dialog I see two promising checkbox options Hostdev Passthrough & SR-IOV (which adds to kernel line

[ovirt-users] Version 4.3.0 installed, but shows 4.2.8

Hi: I just made a new installation from scratch since the last version of oVirt (ovirt-node-ng-installer-4.3.0-2019020409.el7.iso) and at the end of the installation and entering the cockpit, appears that the version is 4.2.8. Here is a screenshot:

[ovirt-users] Re: But in the web interface?

Hey Greg,Thanks for the efforts.It seems the only way I can support the project is to raise bugs - which is causing only troubles :)  ... If you have a way towards Bulgaria - I will buy you a beer.Best Regards,Strahil NikolovOn Feb 5, 2019 16:19, Greg Sheremeta wrote:The fix is pushed. Standalone

[ovirt-users] Re: Cluster upgrade

On Tue, 5 Feb 2019, 14:54 Misak Khachatryan Hi, > > I've successfully upgraded to 4.3, but when I'm trying to upgrade Cluster > version I'm getting this: > > "Error while executing action: Cannot change Cluster Compatibility Version > to higher version when there are active Hosts with lower

[ovirt-users] Re: Host compatibility issue after upgrade from 4.2.8 to 4.3.0

Hi, If you execute Check for update for specific host, you should see list of packages which can be updated in Events view after check for updates process finishes. Martin On Tue, 5 Feb 2019, 16:01 > Please disregard, this was caused by an oversight on my part... I > forgot to enable the > >

[ovirt-users] Re: ovirt-node 4.2 iso - hyperconverged wizard doesn't write gdeployConfig settings

Using SystemD makes way more sense to me. I was just trying to use ovirt-node as it was ... intended? Mainly because I have no idea how it all works yet, so I've been trying to do the most stockish deployment possible, following deployment instructions and not thinking I'm smarter than the

[ovirt-users] Re: Ovirt 4.3 RC missing glusterfs-gnfs

On Tue, Feb 5, 2019 at 6:02 PM Strahil Nikolov wrote: > > > Hi Sandro, > > thanks for your email. > > >Which version are you trying to upgrade from? 4.2.8? > My hosts are still on 4.2.8 and tried to upgrade to 4.3. > > >Can you share the exact error as you see it? > Here is just a short output ,

[ovirt-users] Re: rebooting an ovirt cluster

On Tue, Feb 5, 2019 at 7:23 AM Greg Sheremeta wrote: > > > On Mon, Feb 4, 2019 at 4:15 PM feral wrote: > >> I think I found the answer to glusterd not starting. >> https://bugzilla.redhat.com/show_bug.cgi?id=1472267 >> >> Apparently the version of gluster (3.12.15) that comes packaged with >>

[ovirt-users] Re: rebooting an ovirt cluster

ha! I was all worried I was completely tarding out as I've never heard of 4.3... Released two days ago... On Mon, Feb 4, 2019 at 11:53 PM Sandro Bonazzola wrote: > > > Il giorno mar 5 feb 2019 alle ore 02:53 Greg Sheremeta < > gsher...@redhat.com> ha scritto: > >> >> >> On Mon, Feb 4, 2019 at

[ovirt-users] Re: Host compatibility issue after upgrade from 4.2.8 to 4.3.0

> Please disregard, this was caused by an oversight on my part... I forgot to > enable the > ovirt-4.3 repo on the node in question :-( My bad. This leads to a "Feature Request". What happened was that I updated the first two hosts using yum from the command line, so it was plainly visible

[ovirt-users] Re: But in the web interface?

The fix is pushed. Standalone engine upgrades should be fine starting now. `yum update` any appliance engines or already upgraded engines to get the latest ovirt-engine-ui-extensions, which fixes the problem. I'll add a release note. Thanks all. Best wishes, Greg On Tue, Feb 5, 2019 at 8:48 AM

[ovirt-users] performance issues with Windows 10

Hi, I'm doing some very simple disk benchmarks on Windows 10, both with ESXI 6.7 and oVirt 4.3.0. Both Windows 10 Pro guests have all the driver installed. the "Storage" (Datastore in VMWare and storage domains in oVirt) comes from the same ZFS machine, both mounted as NFS *without* any

[ovirt-users] Cluster upgrade

Hi, I've successfully upgraded to 4.3, but when I'm trying to upgrade Cluster version I'm getting this: "Error while executing action: Cannot change Cluster Compatibility Version to higher version when there are active Hosts with lower version. -Please move Host virt2 with lower version to

[ovirt-users] Re: But in the web interface?

Thanks a lot ;) On Tue, Feb 5, 2019 at 2:38 PM Strahil Nikolov wrote: > Dear Hetz, > > I have opened a bug for that : 1662047 – [UI] 2 dashboard icons after > upgrade > > 1662047 – [UI] 2 dashboard icons after upgrade > >

[ovirt-users] Re: ERROR running your engine inside of the hosted-engine VM and are not in "Global Maintenance" mode

On Tue, Feb 5, 2019 at 1:46 PM Martin Humaj wrote: > Hi the problem is that ovirt-engine is running on different vm like a > virtual machine under the hosts > > !! Cluster is in GLOBAL MAINTENANCE mode !! > I can set it on the host machine but not on the ovirt-engine vm > > Sorry, one thing more

[ovirt-users] Re: Windows 10 - Ovirt 4.3 - EPYC

Currently I dont, but I can get my hands on one later today. I'll let you know how it goes. I dont think I'll have access to the system today though. On Tue, Feb 5, 2019 at 7:57 AM Nisim Simsolo wrote: > Do you have any other Windows ISO (not necessarily Windows 10) to check in > order to see

[ovirt-users] Re: Windows 10 - Ovirt 4.3 - EPYC

Do you have any other Windows ISO (not necessarily Windows 10) to check in order to see if it's not an issue with the ISO file? On Tue, Feb 5, 2019 at 2:52 PM Darin Schmidt wrote: > I dont even get to that point. The VM seems to detect the windows.iso I > downloaded from MS, the windows icon

[ovirt-users] Re: Windows 10 - Ovirt 4.3 - EPYC

I dont even get to that point. The VM seems to detect the windows.iso I downloaded from MS, the windows icon shows up, then it sits there for a while, then I get the error in the picture I attached complaining about a Sytem Thread Exception Not Handled. I dont make it to the install process for

[ovirt-users] Re: Windows 10 - Ovirt 4.3 - EPYC

Hi If it's not Hyper-V SynIC issue, then it might be related to the disk interface. By default, the disk interface is VirtIO and Windows cannot see this interface until you intall VirtIO-Win disk driver. In order to do that, make sure you have VirtIO-Win.ISO in the ISO domain and during the

[ovirt-users] Re: But in the web interface?

Dear Hetz, I have opened a bug for that : 1662047 – [UI] 2 dashboard icons after upgrade | | | | 1662047 – [UI] 2 dashboard icons after upgrade | | | You can check the workaround described there. best Regards,Strahil Nikolov ___ Users

[ovirt-users] Re: ovirt-node 4.2 iso - hyperconverged wizard doesn't write gdeployConfig settings

Dear Feral, >On that note, have you also had issues with gluster not restarting on reboot, >as well as >all of the HA stuff failing on reboot after power loss? Thus far, >the only way I've got the >cluster to come back to life, is to manually >restart glusterd on all nodes, then put the

[ovirt-users] Re: ERROR running your engine inside of the hosted-engine VM and are not in "Global Maintenance" mode

On Tue, Feb 5, 2019 at 12:31 PM wrote: > Hi, > > We run ovirt upgrade to 4.3, after upgrade we wanted to run engine-setup > but we do not know how to put this host which is simply another virtual > machine with ovirt-engine. hosted-engine is running on hosts. > > During execution

[ovirt-users] Re: Ovirt 4.3 RC missing glusterfs-gnfs

Hi Sandro, thanks for your email. >Which version are you trying to upgrade from? 4.2.8? My hosts are still on 4.2.8 and tried to upgrade to 4.3. >Can you share the exact error as you see it? Here is just a short output , while the rest will be provided in a file: --> Finished Dependency

[ovirt-users] Re: [4.3.0] VNC Virt-viewer console not opening

On 19/02/04 04:59, Nicolas Ecarnot wrote: > Hello, > > First, congratulations to all of you who worked for this 4.3.0 release, and > obviously thank you. > > Today, I upgraded 4 oVirt setups (4 DC) from 4.2.7 to 4.3.0. > I went well on all 4 DCs. > > But on one of them, when I try to open a

[ovirt-users] ERROR running your engine inside of the hosted-engine VM and are not in "Global Maintenance" mode

Hi, We run ovirt upgrade to 4.3, after upgrade we wanted to run engine-setup but we do not know how to put this host which is simply another virtual machine with ovirt-engine. hosted-engine is running on hosts. During execution engine service will be stopped (OK, Cancel) [OK]: [

[ovirt-users] Re: [4.3.0] VNC Virt-viewer console not opening

On 19/02/05 05:46, Greg Sheremeta wrote: > On Tue, Feb 5, 2019 at 3:29 AM Nicolas Ecarnot wrote: > > > Hello Greg, > > > > Le 04/02/2019 à 21:13, Greg Sheremeta a écrit : > > > When I try to use Spice instead of VNc, it is working nicely. > > > > My goal is to stick to VNC. > > > > >

[ovirt-users] Re: [4.3.0] VNC Virt-viewer console not opening

On Tue, Feb 5, 2019 at 3:29 AM Nicolas Ecarnot wrote: > Hello Greg, > > Le 04/02/2019 à 21:13, Greg Sheremeta a écrit : > > When I try to use Spice instead of VNc, it is working nicely. > > My goal is to stick to VNC. > > > When I try to use noVNC, the additional tab opens and shows > >

[ovirt-users] Re: But in the web interface?

Hi Hetz, On 2/5/19 10:25 AM, Hetz Ben Hamo wrote: Hi, I upgraded to 4.3 and on the hosted engine web interface, I see the "dashboard" button twice, one below the other. How can I fix it or is it a known bug? Yes, it is known issue and guys are working on that. Package

[ovirt-users] Re: But in the web interface?

Hi, Reported it already: https://bugzilla.redhat.com/show_bug.cgi?id=1665430 Regards, Jorick Astrego On 2/5/19 10:25 AM, Hetz Ben Hamo wrote: > Hi, > > I upgraded to 4.3 and on the hosted engine web interface, I see the > "dashboard" button twice, one below the other. > > How can I fix it or

[ovirt-users] But in the web interface?

Hi, I upgraded to 4.3 and on the hosted engine web interface, I see the "dashboard" button twice, one below the other. How can I fix it or is it a known bug? Thanks Hetz ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to

[ovirt-users] Re: ovn bad gateway after update from 4.2.7 to 4.2.8

On Mon, Feb 4, 2019 at 5:16 PM Dominik Holler wrote: > > On Mon, 4 Feb 2019 15:57:24 +0100 > Gianluca Cecchi wrote: > > > On Mon, Feb 4, 2019 at 2:47 PM Gianluca Cecchi > > wrote: > > > > > On Fri, Feb 1, 2019 at 10:51 PM Dominik Holler wrote: > > > > > >> On Fri, 1 Feb 2019 22:35:00 +0200 > >

[ovirt-users] Re: Host compatibility issue after upgrade from 4.2.8 to 4.3.0

On Tue, Feb 5, 2019 at 5:48 AM wrote: > > Please disregard, this was caused by an oversight on my part... I forgot to > enable the ovirt-4.3 repo on the node in question :-( My bad. Thanks for the report! :-) > ___ > Users mailing list --

[ovirt-users] Re: [4.3.0] VNC Virt-viewer console not opening

Hello Greg, Le 04/02/2019 à 21:13, Greg Sheremeta a écrit : When I try to use Spice instead of VNc, it is working nicely. My goal is to stick to VNC. When I try to use noVNC, the additional tab opens and shows "Unsupported security types: 19" Looks like