[ovirt-users] Re: Server 2008R2 UEFI ISO Boot Problerm

If I change to "Other OS" or any flavor of Linux i get the same result. I've changed the ISO to a W764 ISO as well with the same hang. More modern versions of Windows Server boot fine, but I am not able to restore the backup with a version higher than 2008R2. This link

[ovirt-users] Server 2008R2 UEFI ISO Boot Problerm

Greetings oVirt team I'm using "Version 4.5.7-0.master.20240327074810.git14bca0502d.el8 on CentOS Stream 9" I have occasion to restore a windows backup image for the purpose of data extraction. To accomplish this I need to boot off a Server 2008R2 ISO. The machine to be restored was UEFI

[ovirt-users] Re: Non responsive host (4.3.10)

Maria - Likely you can repair the gluster volumes on that host with xfs_repair and you most likely need to stop the gluster service on that node and unmount the filesystems to do so. After the filesystem is repaired you'll be able to mount them and start the gluster service. From there

[ovirt-users] Re: oVirt Engine Web Console

You do have to use an FQDN to access it. The web management will not respond to IP address requests. When you set up the engine, what FQDN did you use ? In the hosts file of the machine you are using to access the engine, create an entry for that website: Example: 10.10.254.10

[ovirt-users] Re: New oVirt HCI 4.5.4 Cluster Problems

Thank you Sandro. I solved the problem by manually configuring Gluster storage on my three nodes and the running the engine-deploy utility to stand up the management engine. I really appreciate you replying to my question. I know you're really busy.

[ovirt-users] Re: {REQUEST} oVirt (including RHHI) as HCI in the future

I see you never got a reply on this question. What may I ask, did you finally do to achieve the HCI of days gone by ? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] New oVirt HCI 4.5.4 Cluster Problems

Good day all. I'm in the process of deploying a fresh, new cluster and i'm running into a few snags. I'm trying to use the cockpit environment to deploy the gluster storage setup as I have previously done and it's failing consistently. I looked through what I believe to be the current

[ovirt-users] Re: oVirt 2.5.1.2 HCI Gluster Recovery Options

Good Day Strahil; The OS did survive. The OS was on a RAID1 array and the gluster bricks are on a RAID5 array. Since the time I requested guidance I did a whole lot of reading and learning. I found in /etc/ansible several yaml files that contained the configuration of the gluster bricks and

[ovirt-users] oVirt 2.5.1.2 HCI Gluster Recovery Options

Greetings oVirt community; I've got a three-node HCI cluster with hosted engine and on one of the three nodes I lost the underlying RAID array under the Gluster bricks. It looks like I'm going to have to rebuild the RAID array and thus likely lose the Gluster configuration that lives there.

[ovirt-users] Re: Manually Remove Snapshots

This worked for me. I was able to delete the bad snapshot reference and then hose the VM. Thank you for the help ! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement:

[ovirt-users] Re: Manually Remove Snapshots

Attempting to create another snapshot fails with this snippit: - Result: 'cleanSuccess' -- Message: 'VDSGenericException: VDSErrorException: Failed in vdscommand to HSMGetAllTasksStatusesVDS, error = Cannot create volume snapshot from illegal volume: (u'576b2761-a5bc-427b-95a9-0594447f0705',)',

[ovirt-users] Re: Manually Remove Snapshots

I just tried that clone method per your suggestion and I got "VDSM command CopyImageVDS failed: Image is not a legal chain: (u'6af66318-e6f8-45d7-8b4e-2183faf0a917',)" ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to

[ovirt-users] Manually Remove Snapshots

I've got a VM with a pair of snapshots that won't delete and I'm needing a procedure to manually remove the snapshots. I don't need the VM and so while i'd prefer not to destroy it, it wouldn't be critical if I did damage the VM in the process. When I try to delete the snapshots that procedure

[ovirt-users] Re: VM Down With "Bad Volume Specification"

I was able to remedy the situation with the command "./taskcleaner.sh -z -R -J -A". Thank you for your help in pointing me in the right direction. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy

[ovirt-users] Re: VM Down With "Bad Volume Specification"

Thank you. I'll give that a try and report back. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct:

[ovirt-users] Re: VM Down With "Bad Volume Specification"

I'm thinking that I need to somehow stop the disk move, and then delete the snapshot that existed prior to my attempt at moving the disk. Can someone please tell me how to stop that disk move ? ___ Users mailing list -- users@ovirt.org To unsubscribe

[ovirt-users] VM Down With "Bad Volume Specification"

I had occasion to shutdown a VM for the purpose of adding RAM and processor to it and the VM willnot boot back up. I'm seeing "VM Issabel_PBX is down with error. Exit message: Bad volume specification {'address': {'bus': '0', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'},

[ovirt-users] Re: Cannot Log Into Newly Deployed Hosted Engine

Disregard this entry. I have solved my own problem by net research. It appears that the default username has been changed from admin@internal to admin@ovirt. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org

[ovirt-users] Re: Cannot Log Into Newly Deployed Hosted Engine

Below is a clip from keycloak.log: 2022-06-29 10:19:07,007-05 WARN [org.keycloak.events] (default task-1) [] type=LOGIN_ERROR, realmId=0dd6bd82-1891-4dd9-b3bd-9d06b10de669, clientId=ovirt-engine-internal, userId=null, ipAddress=10.1.1.243, error=user_not_found, auth_method=openid-connect,

[ovirt-users] Cannot Log Into Newly Deployed Hosted Engine

I have a fresh installation of a 4.5.1 hosted engine and the admin password I set during the process isn't working. I reset the password for the admin user from a root shell on the HE using the ovirt-aaa-jdbc-tool utility and still no dice. I found a log file for "keycloak" that I tailed while

[ovirt-users] Re: HCI Deployment oVirt 4.5

Thank you very much for the tip. I was able to successfully deploy the engine appliance on the gluster configuration that I deployed previously from the cockpit interface. I cannot log into the management portal via username and password and it appears as though keycloak is the culprit. I'll

[ovirt-users] Re: HCI Deployment oVirt 4.5

Today I reloaded all three nodes with the 4.5.1 ovirt node appliance iso. During the install I used the gui to bond the two 10gig interfaces using the recommended naming convention. I prepped the nodes according to the documentation and invoked the cockpit installation method from node1. The

[ovirt-users] Re: HCI Deployment oVirt 4.5

I did use classic bonding and not teaming. I'm trying to install hyperconverged three node oVirt cluster with self hosted engine. I've done it before in the 4.3 world but not in the 4.4 or 4.5 world. I'm using the cockpit method for deploying the cluster from the first node from the

[ovirt-users] Re: HCI Deployment oVirt 4.5

"No valid network interface has been found If you are using Bonds or VLANs Use the following naming conventions: " However I am using a supported naming convention. I've searched the forums and the general WWW and read the articles that match my errors. i've tried some of the options that are

[ovirt-users] HCI Deployment oVirt 4.5

Hello oVirt Team I'm in the process of deploying a three-node oVirt hyperconverged platform and from the cockpit interface of the deployment node I keep running into the same error. The system finishes the gluster deployment phase (sometimes) and then prompts to continue with the hosted engine

[ovirt-users] Re: Preferred RHEL Based Distro For oVirt

Thank you Gilboa. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct:

[ovirt-users] Re: Preferred RHEL Based Distro For oVirt

Thanks a bunch for the input Neal. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct:

[ovirt-users] Preferred RHEL Based Distro For oVirt

Good Day All; i am inquiring about which RHEL based distros are currently preferred and which ones are currently supported. I know the oVirt project is a RH entity and so RHEL and CentOS-Stream are the base offering. Would it, or is it, feasible for Rocky 8.X, or Alma 8.X to be the base OS for

[ovirt-users] Re: Dedicated Migration Network

Thank you Abe, Angus, and Strahil. I appreciate your direction and input. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct:

[ovirt-users] Re: Dedicated Migration Network

Thanks for the input Abe. For the dedicated migration network, would I need to IP the bonds that I plan to use for that migration network and should they be in an isolated vlan or should the bonds be sans IP in their own vlan ? ___ Users mailing list

[ovirt-users] Dedicated Migration Network

Good Day All; I am in the process of assembling a new oVirt cluster and I am wondering if there is any benefit to having a dedicated set of nics solely dedicated to VM migration. If so, would those nics (bonded) be on their own vlan and subnet or would they share a subnet with gluster storage

[ovirt-users] HCI Cluster Configuration

Ovirt 4.3.9 HCI Gluster 3 Dell 730XD Managed Engine When I finished the "hosted engine deploy" I failed to add the gluster storage according to the documentation and i'd like to get that back on track. 1. I ticked the check box in the cluster configuration to "enable gluster service", all of my

[ovirt-users] Cannot Activate iSCSI Storage Domain After Errors

Good Day To all; oVirt 4.3.4.3-1.el7 6 Dell R710 oVirt Nodes 10 gig Infiniband iSCSI Standalone Engine After an error during scheduled automated VM backkup, the iSCSi datastore that the VMs beinng backed up lived on suddenly went inactive and refuse to activate. The backup job did not finish

[ovirt-users] VM With Snapshots Marked As Illegal

, and if more information is needed please let me know. ~Clint Boggio ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https

Re: [ovirt-users] newbie questions on networking

rtual interface on > the VM are both at the default 1500 MTU. > > How can I determine the MTU setting for the physical switches without admin > access to them? Or do I need to ask the network team? > > > >> On 5/7/2018 2:03 PM, Clint Boggio wrote: >> Randy this

Re: [ovirt-users] newbie questions on networking

Randy this flaky layer two problem reeks of a possible MTU situation between your oVirt switches and your physical switches. > On May 7, 2018, at 3:59 PM, Dominik Holler wrote: > > On Mon, 7 May 2018 11:43:51 -0700 > "Rue, Randy" wrote: > >> I've sort

[ovirt-users] Cluster Processor Change

Forgive me if this is a duplicate, as I had spam filter problems previously when I sent this inquiry. Environment Rundown: OVirt 4.2 6 CentOS 7.4 Compute Nodes Intel Xeon 1 CentOS 7.4 Dedicated Engine Node Intel Xeon 1 Datacenter 1 Storage Domain 1 Cluster 10Gig-E iSCSI Storage 10Gig-E NFS

[ovirt-users] Greetings oVirt Users

Environment Rundown: OVirt 4.2 6 CentOS 7.4 Compute Nodes Intel Xeon 1 CentOS 7.4 Dedicated Engine Node Intel Xeon 1 Datacenter 1 Storage Domain 1 Cluster 10Gig-E iSCSI Storage 10Gig-E NFS Export Domain 20 VM’s of various OS’s and uses The current cluster is using the Nehalem architecture.

Re: [ovirt-users] VM Disks Locked

it with a stick lol. Clint Boggio Cell 903.918.8461 Office 903.213.2523 ext. 210 On Jan 5, 2017, at 9:38 AM, Maton, Brett <mat...@ltresources.co.uk<mailto:mat...@ltresources.co.uk>> wrote: Hopefully someone else will confirm or scream don't do it, before you try this. In the past

[ovirt-users] VM Disks Locked

Good day ovirt family. I'm having trouble with a VM showing that the disk is locked after trying to clone that VM to a new VM. The source machine was powered off when the clone was initiated. The source and destination disks both show to be locked and are currently un-usable. This situation

Re: [ovirt-users] Adding Infiniband VM Network Fails

That is correct. We are successfully using ib0 to access iSCSI and NFS on all nodes. We are now trying to create a network for the VMs to use on ib1. > On Nov 16, 2016, at 1:40 PM, "users-requ...@ovirt.org" > wrote: > > Adding Infiniband VM Network Fails

Re: [ovirt-users] Adding Infiniband VM Network Fails

That is correct. The ib0 in all of the HV nodes are accessing iSCSI and NFS over that IB link successfully. What we are trying to do now is create a network that utilizes the second IB port (ib1) on the cards for some of the virtual machines that live inside the environment. > On Nov 16,

[ovirt-users] 3.6 to 4.0 Functionality Elevation

Greetings OVirt Community I have a production system that started life as a OV 3.6 system, and I've recently upgraded the engine to 4.0. I see in the cluster config, a configuration element that indicates the cluster functionality level. It has a drop down that allows me to toggle between 3.6,

Re: [ovirt-users] Dashboard Never Loads

Yes i changed my browser from IE to Chrome and the dashboard loads beautifully. I should have checked that  first and i apologize. Thank you for your help. On Wed, 2016-10-12 at 11:37 -0400, Rafael Martins wrote: > - Original Message - > > > > From: "Clint Boggio&qu

[ovirt-users] Dashboard Never Loads

Greetings ovirt community; I have an oVirt environment with a dedicated engine, and 4 compute nodes all running CentOS 7, and oVirt 4.0.1.1. On the management interface, the "Dashboard" tab displays "Loading" and the spinning applet is working hard, but nothing ever materializes

Re: [ovirt-users] Management Engine Down

>> Thanks >> >> Martin Perina >> >> >> On Mon, Aug 1, 2016 at 9:24 PM, Clint Boggio <cbog...@inlinenetworks.com >> <mailto:cbog...@inlinenetworks.com>> wrote: >> >>Stand Alone Engine Version 3.6.X >>CentOS 7 &g

[ovirt-users] Management Engine Down

Stand Alone Engine Version 3.6.X CentOS 7 I was preparing to upgrade from OME 3.6.2 to 4.0, when I followed the systems instructions to "migrate" to ovirt-engine-aaa-ldap authentication from the current authentication method. The management engine did fail to restart after the process with the

Re: [ovirt-users] iSCSI Data Domain Down

t; dmsetup remove_all > Then restart your targetcli. > Am 01.05.2016 1:51 nachm. schrieb "Clint Boggio" <cl...@theboggios.com>: >> Greetings oVirt Family; >> >> Due to catastrophic power failure, my datacenter lost power. I am using a >> CentOS7 server to

[ovirt-users] iSCSI Data Domain Down

Greetings oVirt Family; Due to catastrophic power failure, my datacenter lost power. I am using a CentOS7 server to provide ISCSI services to my OVirt platform. When the power came back on, and the iscsi server booted back up, the filters in lvm.conf were faulty and LVM assumed control over

Re: [ovirt-users] Users Digest, Vol 55, Issue 155

Apr 20, 2016, at 3:19 PM, Nir Soffer <nsof...@redhat.com> wrote: > >> On Wed, Apr 20, 2016 at 10:42 PM, Clint Boggio <cl...@theboggios.com> wrote: >> I grepped out the engine logs until i found reference to the illegal >> disk in question. The log indicates that

Re: [ovirt-users] Users Digest, Vol 55, Issue 155

access the data from > > within the guest? > > > > Many thanks, > > > > Simon > > > > > > > > > > > > ___ > > > > Users mailing list > > > >

Re: [ovirt-users] Disks Illegal State

and set the VM's in a usable status status again ? On Mon, 2016-04-18 at 12:39 +, Markus Stockhausen wrote: > > > > Von: users-boun...@ovirt.org [users-boun...@ovirt.org] im > > Auftrag von Clint Boggio [cl...@theboggios.com] > > Gesendet: Montag, 18. April 2016 14:16

Re: [ovirt-users] Disks Illegal State

the GUI. ALL of the UUID's illustrated show as broken symbolic links in the storage domains. On Tue, 2016-04-19 at 21:28 +0300, Nir Soffer wrote: > On Mon, Apr 18, 2016 at 3:16 PM, Clint Boggio <cl...@theboggios.com> > wrote: > > > > OVirt 3.6, 4 node clus

Re: [ovirt-users] Disks Illegal State

Auftrag von >> Clint Boggio [cl...@theboggios.com] >> Gesendet: Montag, 18. April 2016 14:16 >> An: users@ovirt.org >> Betreff: [ovirt-users] Disks Illegal State >> >> OVirt 3.6, 4 node cluster with dedicated engine. Main storage domain is >> iscsi, ISO and Ex

Re: [ovirt-users] Disks Illegal State

Thank you I will read on the link provided and follow the course. > On Apr 18, 2016, at 7:20 AM, Ollie Armstrong <ol...@fubra.com> wrote: > >> On 18 April 2016 at 13:16, Clint Boggio <cl...@theboggios.com> wrote: >> Several of my VM snapshot disks show to be in

Re: [ovirt-users] Disks Illegal State

https://bugzilla.redhat.com/show_bug.cgi?id=1275836 > > > > > Thanks, > Raz Tamir > Red Hat Israel > >> On Mon, Apr 18, 2016 at 3:20 PM, Ollie Armstrong <ol...@fubra.com> wrote: >> On 18 April 2016 at 13:16, Clint Boggio <cl...@theboggios.com>

[ovirt-users] Disks Illegal State

OVirt 3.6, 4 node cluster with dedicated engine. Main storage domain is iscsi, ISO and Export domains are NFS. Several of my VM snapshot disks show to be in an "illegal state". The system will not allow me to manipulate the snapshots in any way, nor clone the active system, or create a new

[ovirt-users] Single VM Down After Attempted Snapshot

Greetings users; I've got a single VM in a 3.6 environment that is in a down state after and attempt at creating a snapshot via script, and exporting said snapshot to the export domain. I see some indications of what could possibly be wrong in the filtered engine.log, and i'm at a loss on how to

Re: [ovirt-users] Storage Diversity Options oVirt 3.6

Thank you Simone ! > On Mar 22, 2016, at 8:44 AM, Simone Tiraboschi <stira...@redhat.com> wrote: > > > >> On Fri, Mar 18, 2016 at 5:27 PM, Clint Boggio <cl...@theboggios.com> wrote: >> Greetings all, and Happy Friday; >> >> I'm running oVirt 3.

[ovirt-users] Storage Diversity Options oVirt 3.6

Greetings all, and Happy Friday; I'm running oVirt 3.6 management engine that is currently overseeing 4 compute nodes, attached to iSCSI storage over Infiniband. The compute nodes have 8 hot-swap hard drive slots, with each only having 2 slots occupied in a hardware RAID array level one for the

Re: [ovirt-users] Admin lockout

That worked like a charm. I'll add that to my cheat sheet. Thank you for your help ! > On Mar 9, 2016, at 3:00 PM, Douglas Landgraf <dland...@redhat.com> wrote: > > Hi Clint, > >> On Wed, Mar 9, 2016 at 2:52 PM, Clint Boggio <cl...@theboggios.com> wrote

[ovirt-users] Admin lockout

I had a keyboard problem and entered the wrong password for admin@internal enough times to finally lock the account. How do I recover from this ? OVirt engine 3.6.2 ___ Users mailing list Users@ovirt.org

[ovirt-users] Promiscuous Mode

I am deploying an OpenVPN server in my OVirt environment and I've come to a dead stop with the developer support on a topic related to OVirt configuration. The developer wants me to put the VM's underlying NIC into promiscuous mode. I've seen this in a VMware environment and I know what they

Re: [ovirt-users] virt-v2v converting multi-disk

> On Feb 29, 2016, at 6:24 AM, Richard W.M. Jones <rjo...@redhat.com> wrote: > >> On Mon, Feb 29, 2016 at 01:44:19PM +0200, Moran Goldboim wrote: >> +Richard, v2v maintainer. >> >>> On Sat, Feb 27, 2016 at 8:45 PM, Clint Boggio <cl...@theboggios.com> wr

[ovirt-users] virt-v2v converting multi-disk

I'm in the process of migrating a series of VM's from KVM environment, to an OVirt environment. I've used virt-v2v to convert quite a few M$ and Linux machines with great success. Coming up I've got to convert a Linux VM that has 3 virtual disks. Inside that VM, the three disks are part of an