Re: [ovirt-users] Automation and engine-setup
- Original Message - > From: "Trey Dockendorf" > To: "users" > Sent: Wednesday, February 25, 2015 10:53:36 PM > Subject: [ovirt-users] Automation and engine-setup > > I am attempting to update my Puppet module [1] that manages oVirt and have > found my method for executing engine-setup works on a fresh install but > fails if run after install, for example to enable reports. > > Normally I run this: > > yes 'Yes' | engine-setup > --config-append=/var/lib/ovirt-engine/setup/answers/ovirt-engine-setup.conf I'd personally put this file elsewhere - /var/lib/ovirt-engine/ is owned by the engine, should be considered semi-private - i.e. might change in the future, cleaned up on upgrades etc. Not that any of this happens today, just be on the safe side. > > However if I've already installed ovirt-engine and then install the packages > for reports and re-run the above command it gets stuck at this step: > > [ INFO ] Stage: Setup validation > During execution engine service will be stopped (OK, Cancel) [OK]: > > Since "Yes" is not a valid response my method does not work. Is there a flag > I can provide in the answers file that would prevent the above prompt? I am > semi familiar with using expect but was hoping to avoid using expect from > within a Puppet module. You should use an answer file specific to the exact state. Run engine-setup manually without supplying an answer file, then use the one generated. You are welcome to open an RFE "engine-setup should have an option --accept-defaults" or something like that. Best, -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] VM failed to start | Bad volume specification
Hi Punit, Engine log does not contain the snippet you quoted before. It does have an occurrence of the same issue with another vm, but with almost only logins and logout, making it, once again, impossible to understand the context. Please give me some information as to your environment - hosts, domains, vms, statuses, versions, I also need more context as to what actions you were performing before this failure, statuses before and after this specific action, but also some scenarion that led to this issue. I would still need the logs of the relevant timeframe. Pleas verify that what you send next time is indeed the relevant logs. Regards, Vered - Original Message - > From: "Punit Dambiwal" > To: "Vered Volansky" > Cc: users@ovirt.org > Sent: Wednesday, February 25, 2015 2:15:02 PM > Subject: Re: [ovirt-users] VM failed to start | Bad volume specification > > Hi Vered, > > Yes... it's new VM...even some of the old vm those can run previousely but > now can not run now... > > On Wed, Feb 25, 2015 at 3:07 PM, Vered Volansky wrote: > > > > > > > - Original Message - > > > From: "Punit Dambiwal" > > > To: users@ovirt.org > > > Sent: Wednesday, February 25, 2015 6:19:53 AM > > > Subject: [ovirt-users] VM failed to start | Bad volume specification > > > > > > Hi, > > > > > > I try to start the VM but it's failed to start...and through the > > following > > > error :- > > > > > > VM vm1 is down with error. Exit message: Bad volume specification > > {'index': > > > 0, 'iface': 'virtio', 'type': 'disk', 'format': 'raw', 'bootOrder': '1', > > > 'address': {'slot': '0x07', 'bus': '0x00', 'domain': '0x', 'type': > > > 'pci', 'function': '0x0'}, 'volumeID': > > > '60c73bf0-d190-420b-917c-04aa00e52f10', 'apparentsize': '1073741824', > > > 'imageID': '8ca66096-bd47-460d-9e09-2966e45b471b', 'specParams': {}, > > > 'readonly': 'false', 'domainID': 'e732a82f-bae9-4368-8b98-dedc1c3814de', > > > 'reqsize': '0', 'deviceId': '8ca66096-bd47-460d-9e09-2966e45b471b', > > > 'truesize': '1054048256', 'poolID': > > '0002-0002-0002-0002-0145', > > > 'device': 'disk', 'shared': 'false', 'propagateErrors': 'off', > > 'optional': > > > 'false'}. > > > > > > Please help me to solve this issue > > > > > > Thanks, > > > Punit > > > > > > ___ > > > Users mailing list > > > Users@ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > Please send engine and vdsm logs, it's impossible to help you without > > context. > > What's the history of the VM you were unable to start? > > Is it a new VM? > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Automation and engine-setup
I am attempting to update my Puppet module [1] that manages oVirt and have found my method for executing engine-setup works on a fresh install but fails if run after install, for example to enable reports. Normally I run this: yes 'Yes' | engine-setup --config-append=/var/lib/ovirt-engine/setup/answers/ovirt-engine-setup.conf However if I've already installed ovirt-engine and then install the packages for reports and re-run the above command it gets stuck at this step: [ INFO ] Stage: Setup validation During execution engine service will be stopped (OK, Cancel) [OK]: Since "Yes" is not a valid response my method does not work. Is there a flag I can provide in the answers file that would prevent the above prompt? I am semi familiar with using expect but was hoping to avoid using expect from within a Puppet module. Thanks, - Trey [1]: https://github.com/treydock/puppet-ovirt/tree/1.x ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Weekly Meeting Minutes -- 2015-02-25
Minutes: http://ovirt.org/meetings/ovirt/2015/ovirt.2015-02-25-15.01.html Minutes (text): http://ovirt.org/meetings/ovirt/2015/ovirt.2015-02-25-15.01.txt Log: http://ovirt.org/meetings/ovirt/2015/ovirt.2015-02-25-15.01.log.html = #ovirt: oVirt Weekly Sync = Meeting started by ydary at 15:01:18 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2015/ovirt.2015-02-25-15.01.log.html . Meeting summary --- * Agenda and roll Call (ydary, 15:01:30) * infra update (ydary, 15:01:30) * 3.5.z updates (ydary, 15:01:30) * 3.6.0 status (ydary, 15:01:30) * conferences and workshops (ydary, 15:01:30) * other topics (ydary, 15:01:30) * infra update (ydary, 15:03:42) * oVirt gerrit has been updated to version 2.10 and now uses SSL. (ydary, 15:06:00) * Strict generic cleanup was added to some jobs and is planned for all jobs, this is to release as much disk space possible. (ydary, 15:07:41) * Slaves have been losing network configuration (dhclient dying), troubleshooting done this week to resolve this. (ydary, 15:08:45) * Some hosts of phx lab are a bit overloaded due to lack of RAM, workload has increased. (ydary, 15:13:21) * ACTION: mvk to discuss how to balance the memory capacity automatically with SLA team (rgolan). (ydary, 15:14:06) * there are plans to upgrade RAM on phx hosts, no schedule set. Memory usage is on average 70-80%~. (ydary, 15:15:38) * 3.5.z updates (ydary, 15:16:46) * Status update at: http://lists.ovirt.org/pipermail/users/2015-February/031551.html (ydary, 15:17:19) * 3.5.2 RC postponed due to blockers. (ydary, 15:17:41) * ACTION: please re-targeted 3.5.2 bugs that did not converge to 3.5.3. (ydary, 15:18:58) * Blocker was about bad handling of zombie tasks while upgrading from previous versions. Taskclenaer util has been now changed by infra and setup must be updated for using the new command line options. (ydary, 15:19:58) * 3.6 status (ydary, 15:21:22) * Status update for 3.6.0: http://lists.ovirt.org/pipermail/users/2015-February/031587.html. (ydary, 15:21:55) * Schedule for 3.6 published. (ydary, 15:22:04) * LINK: https://hibernate.atlassian.net/browse/HV-861 (jhernand, 15:26:35) * Integration 3.6.0 Update: Fedora >= 21 we have jdk 1.8 which doesn't work with jboss-as 7. fc21 doesn't have Java 7 rpms and will EOL in April. (ydary, 15:29:40) * A suggestion was made to move to wildfly. A patch for packaging wildfly 8.2 binaries on EL was submitted. (ydary, 15:31:01) * A bug in one of JBoss' packages is holding us back. That bug will be fixed in Hibernate validator 5.2. (ydary, 15:31:59) * Link to issue: https://hibernate.atlassian.net/browse/HV-861 (ydary, 15:32:49) * It was suggested to replace the hibernate validator included in WildFly 8.2 with version 5.2, where the bug will be fixed. (ydary, 15:33:56) * This suggestion is only valid on fc22. On f21, el6 and el7 we can ship wildfly 8.2 binaries in our repositories. (ydary, 15:35:46) * This is similar to the current approach on some platform aka ovirt-engine-jboss-as providing jboss. (ydary, 15:36:43) * ACTION: If we plan to move to wildfly 8.2 we need to prepare the jenkins job for the packaging, spec file is already merged. (ydary, 15:37:21) * ACTION: sbonazzo rgolan1 jhernand to discuss who will push engine patches, create build job for engine ans so on and will update next week. (ydary, 15:40:43) * ACTION: sbonazzo rgolan1 jhernand to get commitment for this task from infra team. (ydary, 15:41:44) * Moving to wildfly will have to come together with support for Java 8. (ydary, 15:44:09) * Other integration topics: (ydary, 15:44:16) * FC support for hosted engine now available for testing in master snapshot (ydary, 15:44:44) * tiraboschi started porting vdsm to debian jessie. (ydary, 15:45:08) * Debian support led to several patches and opened several bugs about vdsm, ioprocess and others. (ydary, 15:45:40) * New RFEs on docker images for OpenStack services for oVirt 3.6.0. (ydary, 15:48:34) * Node 3.6.0 Update: Progress on node automation and regular el6 and el7 builds in jenkins are available for download. Also continued planning fo 3.6 and will add a feature page for the installation through anaconda. (ydary, 15:50:44) * UX 3.6.0 Update: No updates. Patches are pending for review\merge. (ydary, 15:52:55) * Network 3.6.0 Update: Progress on SR-IOV, some functionality already working already. Other than that no updates. (ydary, 15:54:40) * SLA 3.6.0 Update: ongoing effort for the REST API of quota. A Wiki with the progress will be up hopefully this week (ydary, 15:59:19) * also rgolan started researching edit hosted engine ongoing with sbonazzo and mlipchuk from storage team. Techni
Re: [ovirt-users] Sync Error on Master Domain after adding a second one
This is what I've done basically: 1. added a new data domain (DATA_R3); 2. activated the new data domain - both domains in "active" state; 3. moved Disks from DATA to DATA_R3; 4. tried to put the old data domain in maintenance (from webadmin or shell); 5. both domains became inactive; 6. DATA_R3 came back in "active"; 7. DATA domain went in "being initialized"; 8. Webadmin shows the error "Sync Error on Master Domain between..."; 9. DATA domain completed the reconstruction and came back in "active". Please find engine and vdsm logs here: https://www.dropbox.com/sh/uuwwo8sxcg4ffqp/AAAx6UrwI3jbsN4oraJuDx9Fa?dl=0 -- Stefano Stagnaro Prisma Engineering S.r.l. Via Petrocchi, 4 20127 Milano – Italy Tel. 02 26113507 int 339 e-mail: stefa...@prisma-eng.com skype: stefano.stagnaro On mer, 2015-02-25 at 07:05 -0500, Vered Volansky wrote: > Please specify the exact flow building to this error, in terms of adding a > new domain, the statuses of both domains when an operation is performed, etc. > What are the statuses of both domains? > > In case this is not the same issue, we'll need to have a look at the full > engine & vdsm logs. > > - Original Message - > > From: "Stefano Stagnaro" > > To: users@ovirt.org > > Sent: Wednesday, February 25, 2015 1:18:41 PM > > Subject: [ovirt-users] Sync Error on Master Domain after adding a second one > > > > I'm testing oVirt 3.5.2 nightly with 1 host for engine, 2 for virt (v10,v11) > > and 2 for GlusterFS (s20,s21). The Master Data Domain (named DATA) rely on > > GlusterFS. > > > > I've added second Data Domain (named DATA_R3) in order to switch the Master > > role and remove the old one. Every time I try to put the old Data Domain in > > maintenance I got the following error: > > > > "Sync Error on Master Domain between Host v10 and oVirt Engine. Domain: > > DATA_R3 is marked as Master in oVirt Engine database but not on the Storage > > side. Please consult with Support on how to fix this issue." > > > > Same error if I try to put DATA in maintenance from the shell: > > > > # action storagedomain '62a034ca-63df-44f2-9a87-735ddd257a6b' deactivate > > --datacenter-identifier '0002-0002-0002-0002-022f' > > > > I cannot switch to the new Master Data Domain neither I can put the Data > > Center in maintenance. > > > > I'm not sure if it is related to bug 1183977. I've already upgraded to > > ovirt-engine-3.5.2-0.0.master.20150224122113.git410d88b.el6.noarch but the > > problem still happen. > > > > Thanks, > > -- > > Stefano Stagnaro > > > > Prisma Engineering S.r.l. > > Via Petrocchi, 4 > > 20127 Milano – Italy > > > > Tel. 02 26113507 int 339 > > e-mail: stefa...@prisma-eng.com > > skype: stefano.stagnaro > > > > ___ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.5.2 RC status - postponing
Il 24/02/2015 19:25, Einav Cohen ha scritto: >> - Please update the target to 3.5.3 or later for bugs that won't be in 3.5.2: >> it will ease gathering the blocking bugs for next releases. > > can we add a '3.5.3' value to the 'Target Release' field in bugzilla? Done > > - Original Message - >> From: "Sandro Bonazzola" >> To: "Yair Zaslavsky" , "Simone Tiraboschi" >> , Users@ovirt.org, >> de...@ovirt.org >> Sent: Tuesday, February 24, 2015 9:54:27 AM >> Subject: [ovirt-users] [QE][ACTION NEEDED] oVirt 3.5.2 RC status - postponing >> >> Hi, >> We still have one open blocker for 3.5.2[1]: >> >> Bug ID Whiteboard Status Summary >> 1161012 infra POSTtask cleaning utility should erase commands >> that have >> running tasks >> >> We need to postpone the RC until this will be fixed. >> The patch is already under review and verification so it shouldn't take too >> much. >> >> >> There are still 48 bugs [2] targeted to 3.5.2. >> Excluding node and documentation bugs we still have 42 bugs [3] targeted to >> 3.5.2. >> >> Whiteboard NEW ASSIGNEDPOSTTotal >> doc 1 0 0 1 >> docs 1 0 0 1 >> gluster 4 0 1 5 >> infra4 2 8 14 >> integration 0 0 1 1 >> network 1 1 0 2 >> node 4 0 1 5 >> ppc 0 0 1 1 >> sla 4 0 0 4 >> storage 11 0 0 11 >> ux 1 0 0 1 >> virt 1 0 1 2 >> Total32 3 13 48 >> >> >> Maintainers / Assignee: >> - Please add the bugs to the tracker if you think that 3.5.2 should not be >> released without them fixed. >> - Please update the target to 3.5.3 or later for bugs that won't be in 3.5.2: >> it will ease gathering the blocking bugs for next releases. >> - Please fill release notes, the page has been created and updated here [4] >> >> Community: >> - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the >> test page [5] >> >> [1] http://bugzilla.redhat.com/1186161 >> [2] http://goo.gl/crVJPH >> [3] http://goo.gl/2qTZZU >> [4] http://www.ovirt.org/OVirt_3.5.2_Release_Notes >> [5] http://www.ovirt.org/Testing/oVirt_3.5.2_Testing >> >> -- >> Sandro Bonazzola >> Better technology. Faster innovation. Powered by community collaboration. >> See how it works at redhat.com >> ___ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Hi, here's an update on 3.6 status on integration / rel-eng side Schedule for 3.6.0 has been published[1] and external project schedules have been updated[2]. The tracker bug for 3.6.0 [3] currently shows no blockers. There are 561 bugs [4] targeted to 3.6.0. Excluding node and documentation bugs we have 514 bugs [5] targeted to 3.6.0. NEW ASSIGNEDPOSTTotal docs11 0 0 11 gluster 30 2 1 33 i18n2 0 0 2 infra 83 8 5 96 integration 61 6 4 71 network 32 2 9 43 node27 3 3 33 ppc 0 0 1 1 sla 53 3 0 56 spice 1 0 0 1 storage 74 4 5 83 ux 34 0 8 42 virt73 6 10 89 Total 481 34 46 561 Features submission is still open until 2015-04-22 as per current release schedule. Be sure to have your features tracked in the google doc[6] >From integration side, Hosted Engine support for FC is available in nightly >builds for testing. [1] http://www.ovirt.org/OVirt_3.6_Release_Management#Key_Milestones [2] http://www.ovirt.org/OVirt_3.6_Release_Management#External_Project_Schedules [3] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [4] https://bugzilla.redhat.com/buglist.cgi?quicksearch=target_release%3A3.6.0%20Product%3AoVirt%20status%3Anew%2Cassigned%2Cpost [5] http://goo.gl/ZbUiMc [6] http://goo.gl/9X3G49 -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Sync Error on Master Domain after adding a second one
Please specify the exact flow building to this error, in terms of adding a new domain, the statuses of both domains when an operation is performed, etc. What are the statuses of both domains? In case this is not the same issue, we'll need to have a look at the full engine & vdsm logs. - Original Message - > From: "Stefano Stagnaro" > To: users@ovirt.org > Sent: Wednesday, February 25, 2015 1:18:41 PM > Subject: [ovirt-users] Sync Error on Master Domain after adding a second one > > I'm testing oVirt 3.5.2 nightly with 1 host for engine, 2 for virt (v10,v11) > and 2 for GlusterFS (s20,s21). The Master Data Domain (named DATA) rely on > GlusterFS. > > I've added second Data Domain (named DATA_R3) in order to switch the Master > role and remove the old one. Every time I try to put the old Data Domain in > maintenance I got the following error: > > "Sync Error on Master Domain between Host v10 and oVirt Engine. Domain: > DATA_R3 is marked as Master in oVirt Engine database but not on the Storage > side. Please consult with Support on how to fix this issue." > > Same error if I try to put DATA in maintenance from the shell: > > # action storagedomain '62a034ca-63df-44f2-9a87-735ddd257a6b' deactivate > --datacenter-identifier '0002-0002-0002-0002-022f' > > I cannot switch to the new Master Data Domain neither I can put the Data > Center in maintenance. > > I'm not sure if it is related to bug 1183977. I've already upgraded to > ovirt-engine-3.5.2-0.0.master.20150224122113.git410d88b.el6.noarch but the > problem still happen. > > Thanks, > -- > Stefano Stagnaro > > Prisma Engineering S.r.l. > Via Petrocchi, 4 > 20127 Milano – Italy > > Tel. 02 26113507 int 339 > e-mail: stefa...@prisma-eng.com > skype: stefano.stagnaro > > ___ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Sync Error on Master Domain after adding a second one
I'm testing oVirt 3.5.2 nightly with 1 host for engine, 2 for virt (v10,v11) and 2 for GlusterFS (s20,s21). The Master Data Domain (named DATA) rely on GlusterFS. I've added second Data Domain (named DATA_R3) in order to switch the Master role and remove the old one. Every time I try to put the old Data Domain in maintenance I got the following error: "Sync Error on Master Domain between Host v10 and oVirt Engine. Domain: DATA_R3 is marked as Master in oVirt Engine database but not on the Storage side. Please consult with Support on how to fix this issue." Same error if I try to put DATA in maintenance from the shell: # action storagedomain '62a034ca-63df-44f2-9a87-735ddd257a6b' deactivate --datacenter-identifier '0002-0002-0002-0002-022f' I cannot switch to the new Master Data Domain neither I can put the Data Center in maintenance. I'm not sure if it is related to bug 1183977. I've already upgraded to ovirt-engine-3.5.2-0.0.master.20150224122113.git410d88b.el6.noarch but the problem still happen. Thanks, -- Stefano Stagnaro Prisma Engineering S.r.l. Via Petrocchi, 4 20127 Milano – Italy Tel. 02 26113507 int 339 e-mail: stefa...@prisma-eng.com skype: stefano.stagnaro ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [RFI] oVirt 3.6 Planning
On Wed, Sep 17, 2014 at 09:34:48AM +0800, Punit Dambiwal wrote: > Hi, > > Also can add multiple ips to a single (VNIC) network interface...on Guest > VM... oVirt does not manage IP addresses of guests[*], it only reports them. Nothing in ovirt blocks you from setting multiple addresses inside the guest. These addresses are then reported by the guest agent and shown on GUI. Unless, of course, I don't understand your request. [*] unless you use the neutron intgeration ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Running in db and not running in VDS
- Original Message - > From: "Punit Dambiwal" > To: "Omer Frenkel" > Cc: users@ovirt.org, "Martin Pavlik" , "Martin Perina" > > Sent: Tuesday, February 24, 2015 8:24:07 PM > Subject: Re: [ovirt-users] Running in db and not running in VDS > > Hi Omer, > > but when i destroy the vm...vm destroyed successfully but it's disk doesn't > and when i try to manually remove the disk from ovirt...it's failed to > remove also > can you please attach engine.log and vdsm.log for the removeVm ? > Thanks, > Punit > > On Tue, Feb 24, 2015 at 4:07 PM, Omer Frenkel wrote: > > > > > > > - Original Message - > > > From: "Punit Dambiwal" > > > To: users@ovirt.org, "Martin Pavlik" , "Martin > > Perina" > > > Sent: Tuesday, February 24, 2015 6:11:03 AM > > > Subject: [ovirt-users] Running in db and not running in VDS > > > > > > Hi, > > > > > > VM failed to create, failed to reboot and through the errors :- > > > > > > 2015-02-23 17:27:11,879 INFO > > > [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] > > > (DefaultQuartzScheduler_Worker-64) [1546215a] VM > > > 8325d21f97888adff6bd6b70bfd6c13b (b74d945c-c9f8-4336-a91b-390a11f07650) > > is > > > running in db and not running in VDS compute11 > > > > > > > this is ok, this means that the engine discovered vm that moved to down > > look at the log for the reason it failed. > > > > > and for delete VM :- > > > > > > > > > > > > 2015-02-23 17:21:44,625 WARN > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > > (ajp--127.0.0.1-8702-57) [4534b0a2] Correlation ID: 6769, Job ID: > > > 76d135de-ef8d-41dc-9cc0-855134ededce, Call Stack: null, Custom Event ID: > > -1, > > > Message: VM 1feac62b8cd19fcc2ff296957adc8a4a has been removed, but the > > > following disks could not be removed: Disk1. These disks will appear in > > the > > > main disks tab in illegal state, please remove manually when possible. > > > > > > > > > > > > > > > Thanks, > > > > > > Punit > > > > > > ___ > > > Users mailing list > > > Users@ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Manager problem
Hi, Here is the result of the command actually tables "audit_log" are very large . What can I do to prevent the file system fills up? psql engine -c "SELECT nspname || '.' || relname AS relation, pg_size_pretty(pg_relation_size(C.oid)) AS size FROM pg_class C LEFT JOIN pg_namespace N ON (N.oid = C.relnamespace) WHERE nspname NOT IN ('pg_catalog', 'information_schema') ORDER BY pg_relation_size(C.oid) DESC LIMIT 20;" relation | size --+- public.audit_log | 826 MB public.idx_audit_correlation_id | 159 MB public.idx_audit_log_job_id | 114 MB public.idx_audit_log_storage_domain_name | 114 MB public.idx_audit_log_user_name | 114 MB public.idx_audit_log_vm_name | 114 MB public.idx_audit_log_storage_pool_name | 114 MB public.idx_audit_log_vds_name| 114 MB public.idx_audit_log_vm_template_name| 113 MB public.pk_audit_log | 90 MB public.idx_audit_log_log_time| 90 MB pg_toast.pg_toast_2618 | 1336 kB public.vm_dynamic| 680 kB public.vm_statistics | 496 kB public.disk_image_dynamic| 288 kB public.vds_interface_statistics | 256 kB public.vm_device | 208 kB public.vds_dynamic | 128 kB pg_toast.pg_toast_2619 | 120 kB public.pk_disk_image_dynamic | 104 kB (20 rows) Regards Massimo ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
Hey, On Wed, Feb 25, 2015 at 09:23:28AM +0100, Juan Jose wrote: > Hello everybody, > > The Windows clients have installed Windows 7 Enterprise gets from Windows > MSDNAA and it is installed in all machines here in our University. > > If you need some other information, please, feel free to ask me. I'm asking about remote-viewer (Windows SPICE client ;). Where did you get it from, and what version is it? Thanks, Christophe pgp2hFQLH4YoX.pgp Description: PGP signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [Spice-devel] Problem with USB redirection
Hello everybody, The Windows clients have installed Windows 7 Enterprise gets from Windows MSDNAA and it is installed in all machines here in our University. If you need some other information, please, feel free to ask me. Best regards, Juanjo. On Tue, Feb 24, 2015 at 6:27 PM, Christophe Fergeau wrote: > Hey, > > On Tue, Feb 24, 2015 at 11:32:28AM -0500, Itamar Heim wrote: > > On 02/24/2015 10:41 AM, Juan Jose wrote: > > >But I have a problem with Windows 7 clients. When I try to redirect a > > >USB from my Windows 7 client to my Windows 7 VM the remote-viewer gives > > >the error "USB redirections support not compiled in". Any suggest or > > >idea about what is my problem? > > Where did you get the Windows client from? What version is it? > > Christophe > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Problem deploying ovirt-hosted-engine to iSCSI
- Original Message - > From: "Justin Clacherty" > To: "Simone Tiraboschi" > Cc: "Donny Davis" , users@ovirt.org > Sent: Wednesday, February 25, 2015 5:26:37 AM > Subject: Re: [ovirt-users] Problem deploying ovirt-hosted-engine to iSCSI > > On 25/02/2015 12:35 AM, Simone Tiraboschi wrote: > > Can you please paste here the output of vdsClient -s 0 getDeviceList 3 > > thanks > > Sure. Once the iscsi target is logged in the call to vdsClient never > returns. After a few minutes I hit ctrl-c, that's what caused the > traceback. See below for the output. Could you please upload somewhere your VDSM logs (/var/log/vdsm/vdsm.log)? > [root@host0 ~]# vdsClient -s 0 getDeviceList 3 > [] > > [root@host0 ~]# lsblk > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:00 55.9G 0 disk > ├─sda1 8:10 500M 0 part /boot > ├─sda2 8:20 5.6G 0 part [SWAP] > └─sda3 8:30 49.8G 0 part /home > sr0 11:01 1024M 0 rom > [root@host0 ~]# iscsiadm -m session > iscsiadm: No active sessions. > [root@host0 ~]# iscsiadm --mode discovery --type sendtargets --portal > 10.50.0.200 > 10.51.0.200:3260,1 iqn.2015-02.local.redfish:san0 > 10.50.0.200:3260,1 iqn.2015-02.local.redfish:san0 > [root@host0 ~]# iscsiadm --mode node --targetname > iqn.2015-02.local.redfish:san0 --portal 10.50.0.200 --login > Logging in to [iface: default, target: iqn.2015-02.local.redfish:san0, > portal: 10.50.0.200,3260] (multiple) > Login to [iface: default, target: iqn.2015-02.local.redfish:san0, > portal: 10.50.0.200,3260] successful. > [root@host0 ~]# lsblk > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:00 55.9G 0 disk > ├─sda1 8:10 500M 0 part /boot > ├─sda2 8:20 5.6G 0 part [SWAP] > └─sda3 8:30 49.8G 0 part /home > sdb 8:16 0 30G 0 disk > sr0 11:01 1024M 0 rom > [root@host0 ~]# vdsClient -s 0 getDeviceList 3 > ^CTraceback (most recent call last): >File "/usr/share/vdsm/vdsClient.py", line 2683, in > code, message = commands[command][0](commandArgs) >File "/usr/share/vdsm/vdsClient.py", line 626, in getDeviceList > devices = self.s.getDeviceList(*args) >File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__ > return self.__send(self.__name, args) >File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request > verbose=self.__verbose >File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request > return self.single_request(host, handler, request_body, verbose) >File "/usr/lib64/python2.7/xmlrpclib.py", line 1294, in single_request > response = h.getresponse(buffering=True) >File "/usr/lib64/python2.7/httplib.py", line 1045, in getresponse > response.begin() >File "/usr/lib64/python2.7/httplib.py", line 409, in begin > version, status, reason = self._read_status() >File "/usr/lib64/python2.7/httplib.py", line 365, in _read_status > line = self.fp.readline(_MAXLINE + 1) >File "/usr/lib64/python2.7/socket.py", line 476, in readline > data = self._sock.recv(self._rbufsize) >File "/usr/lib64/python2.7/ssl.py", line 241, in recv > return self.read(buflen) >File "/usr/lib64/python2.7/ssl.py", line 160, in read > return self._sslobj.read(len) > KeyboardInterrupt > > > > > ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users