Re: [ovirt-users] Ovirt remove network from hosted engine

On 06/27/2017 09:49 PM, Abi Askushi wrote: Hi all, Just in case ones needs it, in order to remove the secondary network interface from engine, you can go to: Virtual Machines -> Hostedengine -> Network Interfaces -> edit -> unplug it -> confirm -> remove it. cool. But in your previous mail

Re: [ovirt-users] vm shutdown long delay is a problem for users of pools

Hi, Please see comments below. On Thu, Jun 22, 2017 at 7:15 PM, Paul wrote: > Hi, > > Shutting down VM’s in the portal with the red downfacing arrow takes quite > some time (about 90 seconds). I read this is mainly due to a 60 second > delay in the ovirt-guest-agent. I got used

Re: [ovirt-users] HostedEngine VM not visible, but running

On the host that has the Hosted Engine VM, the sanlock.log reports: 2017-06-27 17:30:20+0100 1043742 [7307]: add_lockspace 207221b2-959b-426b-b945-18e1adfed62f:3:/dev/207221b2-959b-426b-b945-18e1adfed62f/ids:0 conflicts with name of list1 s5

Re: [ovirt-users] HostedEngine VM not visible, but running

I see this on the host it is trying to migrate in /var/log/sanlock: 2017-06-27 17:10:40+0100 527703 [2407]: s3528 lockspace 207221b2-959b-426b-b945-18e1adfed62f:1:/dev/207221b2-959b-426b-b945-18e1adfed62f/ids:0 2017-06-27 17:13:00+0100 527843 [27446]: s3528 delta_acquire host_id 1 busy1 1 2

Re: [ovirt-users] HostedEngine VM not visible, but running

Hi Martin, Thanks for the reply. I have done this, and the deployment completed without error. However, it still will not allow the Hosted Engine migrate to another host. The /etc/ovirt-hosted-engine/hosted-engine.conf got created ok on the host I re-installed, but the ovirt-ha-broker.service,

Re: [ovirt-users] Ovirt remove network from hosted engine

Hi all, Just in case ones needs it, in order to remove the secondary network interface from engine, you can go to: Virtual Machines -> Hostedengine -> Network Interfaces -> edit -> unplug it -> confirm -> remove it. It was simple... On Tue, Jun 27, 2017 at 4:54 PM, Abi Askushi

Re: [ovirt-users] Moving thin provisioned disks question

On Tue, Jun 27, 2017 at 3:09 PM, InterNetX - Juergen Gotteswinter < j...@internetx.com> wrote: > > > > > > > Suppose I have one 500Gb thin provisioned disk > > > Why can I indirectly see that the actual size is 300Gb only in > Snapshots > > > tab --> Disks of its VM ? > > > >

Re: [ovirt-users] hosted-engine network

Would re-deploying the hosted-engine and restoring the backup be an option? Thanks a lot for your help Rgds, Arsène On 06/27/2017 03:15 PM, Evgenia Tokar wrote: The set-shared-config does not allow editing of the vm.conf or the ovf. The original vm.conf that the hosted engine vm was started

Re: [ovirt-users] Ovirt remove network from hosted engine

Hi Knarra, Then I had already enabled NFS on ISO gluster volume. Maybe i had some networking issue then. I need to remove the secondary interface in order to test that again. On Tue, Jun 27, 2017 at 4:25 PM, knarra wrote: > On 06/27/2017 06:34 PM, Abi Askushi wrote: > > Hi

[ovirt-users] Windows USB Redirection

Hi All, I have Ovirt 4.1 with 3 nodes on top glusterfs, all are running smoothly except USB redirection. I Have 2 VMs: - Windows 2016 64bit - Windows 10 64bit Although both are able to see USB have attached issue. On Past when testing on Windows 7 VM USB redirection was running

Re: [ovirt-users] Ovirt remove network from hosted engine

On 06/27/2017 06:34 PM, Abi Askushi wrote: Hi Knarra, The ISO domain is of type gluster though I had nfs enabled on that volume. you need to have nfs enabled on the volume. what i meant is nfs.disable off which means nfs is on. For more info please refer to bug

Re: [ovirt-users] hosted-engine network

The set-shared-config does not allow editing of the vm.conf or the ovf. The original vm.conf that the hosted engine vm was started with contains the correct network, so it must have been removed at a later stage. To get a working environment I don't see another option then fixing the network in

Re: [ovirt-users] Moving thin provisioned disks question

> > > > Suppose I have one 500Gb thin provisioned disk > > Why can I indirectly see that the actual size is 300Gb only in Snapshots > > tab --> Disks of its VM ? > > if you are using live storage migration, ovirt creates a qcow/lvm > snapshot of the vm block device. but

Re: [ovirt-users] Ovirt remove network from hosted engine

Hi Knarra, The ISO domain is of type gluster though I had nfs enabled on that volume. I will disable the nfs and try. Though in order to try I need first to remove that second interface from engine. Is there a way I can remove the secondary storage network interface from the engine? Thanx On

Re: [ovirt-users] HostedEngine VM not visible, but running

> Should it be? It was not in the instructions for the migration from > bare-metal to Hosted VM The hosted engine will only migrate to hosts that have the services running. Please put one other host to maintenance and select Hosted engine action: DEPLOY in the reinstall dialog. Best regards

Re: [ovirt-users] Ovirt remove network from hosted engine

On 06/27/2017 05:41 PM, Abi Askushi wrote: Hi all, When setting up hosted engine setup on top gluster with 3 nodes, I had gluster configured on a separate network interface, as recommended. When I tried later to upload ISO from engine to ISO domain, the engine was not able to upload it since

[ovirt-users] Ovirt remove network from hosted engine

Hi all, When setting up hosted engine setup on top gluster with 3 nodes, I had gluster configured on a separate network interface, as recommended. When I tried later to upload ISO from engine to ISO domain, the engine was not able to upload it since the VM did not have access to the separate

Re: [ovirt-users] oVirt split brain resolution

Hi Satheesaran, gluster volume info engine Volume Name: engine Type: Replicate Volume ID: 3caae601-74dd-40d1-8629-9a61072bec0f Status: Started Snapshot Count: 0 Number of Bricks: 1 x (2 + 1) = 3 Transport-type: tcp Bricks: Brick1: gluster0:/gluster/engine/brick Brick2:

Re: [ovirt-users] HostedEngine VM not visible, but running

I changed the 'os.other.devices.display.protocols.value.3.6 = spice/qxl,vnc/cirrus,vnc/qxl' line to have the same display protocols as 4 and the hosted engine now appears in the list of VMs. I am guessing the compatibility version was causing it to use the 3.6 version. However, I am still unable

Re: [ovirt-users] Moving thin provisioned disks question

On Tue, Jun 27, 2017 at 1:37 PM, InterNetX - Juergen Gotteswinter < j...@internetx.com> wrote: > > > Am 27.06.2017 um 11:27 schrieb Gianluca Cecchi: > > Hello, > > I have a storage domain that I have to empty, moving its disks to > > another storage domain, > > > > Both source and target domains

Re: [ovirt-users] Moving thin provisioned disks question

On Tue, Jun 27, 2017 at 12:37 PM, InterNetX - Juergen Gotteswinter < j...@internetx.com> wrote: > > > Am 27.06.2017 um 11:27 schrieb Gianluca Cecchi: > > Hello, > > I have a storage domain that I have to empty, moving its disks to > > another storage domain, > > > > Both source and target domains

Re: [ovirt-users] oVirt split brain resolution

On Sat, Jun 24, 2017 at 3:17 PM, Abi Askushi wrote: > Hi all, > > For the records, I had to remove manually the conflicting directory and ts > respective gfid from the arbiter volume: > > getfattr -m . -d -e hex e1c80750-b880-495e-9609-b8bc7760d101/ha_agent > > That

Re: [ovirt-users] Moving thin provisioned disks question

Am 27.06.2017 um 11:27 schrieb Gianluca Cecchi: > Hello, > I have a storage domain that I have to empty, moving its disks to > another storage domain, > > Both source and target domains are iSCSI > What is the behavior in case of preallocated and thin provisioned disk? > Are they preserved with

Re: [ovirt-users] Access VM Console on a Smart Phone with User Permission

On Tue, Jun 27, 2017 at 12:08 PM, Jerome R wrote: > I tried this workaround, I tried to logon the user acct to moVirt with 1 > of the admin permission resources, it works I can access to the VM assigned > however I'm able to see what Admin can see in the portal though

Re: [ovirt-users] Access VM Console on a Smart Phone with User Permission

Hi Tomas, Thanks for your response. What do you mean by "removing the support for user permissions"? I'm using the latest version of moVirt 1.7.1, and ovirt-engine 4.1. Is there anyone tried running user role in moVirt? Best Regards, Jerome On Tue, Jun 20, 2017 at 5:14 PM, Tomas Jelinek

[ovirt-users] Moving thin provisioned disks question

Hello, I have a storage domain that I have to empty, moving its disks to another storage domain, Both source and target domains are iSCSI What is the behavior in case of preallocated and thin provisioned disk? Are they preserved with their initial configuration? Suppose I have one 500Gb thin

Re: [ovirt-users] iSCSI storage domain and multipath when adding node

On Mon, Apr 10, 2017 at 3:06 PM, Gianluca Cecchi wrote: > > > On Mon, Apr 10, 2017 at 2:44 PM, Ondrej Svoboda > wrote: > >> Yes, this is what struck me about your situation. Will you be able to >> find relevant logs regarding multipath

Re: [ovirt-users] oVirt Live USB3 question

Hi Michael, I'm glad that I could help. Yes, while USB3 has an impressive interface (and thus potential) speed of up to 5 gbps (or over 600 MB/sec) the actual hardware normally provides speeds which for basic DOKs are even under USB 2.0 spec. in most cases (under 60 MB/sec.). However, as I also

Re: [ovirt-users] Access VM Console on a Smart Phone with User Permission

On Tue, Jun 27, 2017 at 10:13 AM, Jerome Roque wrote: > Hi Tomas, > > Thanks for your response. What do you mean by "removing the support for > user permissions"? I'm using > The oVirt permission model expects to be told explicitly by one header if the logged in user

Re: [ovirt-users] Empty cgroup files on centos 7.3 host

On Mon, Jun 26, 2017 at 11:03 PM, Florian Schmid wrote: > Hi, > > I wanted to monitor disk IO and R/W on all of our oVirt centos 7.3 > hypervisor hosts, but it looks like that all those files are empty. > We have a very nice integration with Elastic based monitoring and

Re: [ovirt-users] "Could not detect Guest Agent on VM"

Hi Tomas, this is how it looks like in the device Manager: [cid:image002.jpg@01D2EF24.EE658F20] The Logfile holds some errors and no new errors are generated when I initiate the snapshot. I would like to do snapshots without memory and I believe that this requires some working file system