Hello Matt,
Can you perform the command cat /etc/fstab and see what partitions you already
created during installation ?
Did you leave the installation to decide what to do with partitioning by itself
or did you did that yourself ?
Kind regards.
> On 16 Feb 2018, at 00:23, Matt Simonsen wrot
Did you try partprobe and pvscan before pvcreate?
On Feb 16, 2018 01:23, "Matt Simonsen" wrote:
> Hello all,
>
> This may not be oVirt specific (but it may be) so thank you in advance for
> any assistance.
>
> I have a system installed with oVirt Node Next 4.1.9 that was installed to
> /dev/sda
Original Message
On February 15, 2018 12:52 AM, Yedidyah Bar David wrote:
>On Wed, Feb 14, 2018 at 9:20 PM, Alex Bartonek a...@unix1337.com wrote:
>> Original Message
>> On February 14, 2018 2:23 AM, Yedidyah Bar David d...@redhat.com wrote:
>>>On Wed, Feb 14,
Hello all,
This may not be oVirt specific (but it may be) so thank you in advance
for any assistance.
I have a system installed with oVirt Node Next 4.1.9 that was installed
to /dev/sda
I had a seperate RAID Volume /dev/sdb that should not have been used,
but now that the operating system
On Thu, Feb 15, 2018 at 12:36 PM, Mark Steele wrote:
> Good morning,
>
> We had a storage crash early this morning that messed up a couple of our
> ovirt hosts. Networking seemed to be the biggest issue. I have decided to
> remove the bridge information in /etc/sysconfig/network-scripts and ip th
On Wed, Feb 14, 2018 at 11:12 PM, Dmitry Semenov wrote:
> I have a not big cluster on oVirt 4.2.
> Each node has a bond, that has several vlans in its turn.
> I use virtual networks OVN (External Provider -> ovirt-provider-ovn).
>
> While testing I have noticed that in virtual network MTU must be
Yes you can.
On Feb 15, 2018 23:09, "Mark Steele" wrote:
> I have with no joy.
>
> Question: Can I restart the HostedEngine with running VM's without
> negatively impacting them?
>
>
> ***
> *Mark Steele*
> CIO / VP Technical Operations | TelVue Corporation
> TelVue - We Share Your Vision
> 1600
>> Is this a supported configuration? Is there a way I can tell the
>> datacenter that the management network is on vlan 1005? Should I file a bug
>> report?
>>
> Yes, please.
Submitted
https://bugzilla.redhat.com/show_bug.cgi?id=1545931
>> Is there a workaround?
>>
>
> You can pass --noansible
I have with no joy.
Question: Can I restart the HostedEngine with running VM's without
negatively impacting them?
***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue - We Share Your Vision
16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
800.885.8886 x128 | mste...@tel
Hello.
Just had the same issue
@ 4.1, upgraded to 4.2(.1)
Updated cluster compatibility, then, data centre compatibility
All VMs lost their hardware (NICs (showed attached but unplugged), disks
(status changed to disabled) and console)
Our solution was simply to connect the NICs, activate the dis
On Thu, Feb 15, 2018 at 11:54 AM, Michal Skrivanek
wrote:
>
>
>> On 15 Feb 2018, at 15:58, John Taylor wrote:
>>
>> Hi Nicolas,
>> I had the same problem and it looked like it was because of some older
>> vms (I believe from 3.6) that were configured with console with video
>> type of CIRRUS and
On Thursday, February 15, 2018 1:14:44 PM EST Mark Steele wrote:
> Michal,
>
> Thank you for the response.
>
> - there are no qemu processes running
> - the server has been rebooted several times
> - the engine has been rebooted several times
>
> The issue persists. I'm not sure where to look ne
On 15 Feb 2018, at 18:34, Christopher Cox wrote:
On 02/15/2018 11:10 AM, Michal Skrivanek wrote:
..snippity... with regards to oVirt 3.5
that’s a really old version….
I know I'll catch heat for this, but by "old" you mean like December of
2015? Just trying put things into perspective. Thus i
Michal,
Thank you for the response.
- there are no qemu processes running
- the server has been rebooted several times
- the engine has been rebooted several times
The issue persists. I'm not sure where to look next.
***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue -
On 15 Feb 2018, at 18:25, Benny Zlotnik wrote:
Under the 3 dots as can be seen in the attached screenshot
Huh, I guess I confused that with sysprep and was looking for it in VM menu
Thanks!
On Thu, Feb 15, 2018 at 7:07 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
>
> > On 15
On Thu, Feb 15, 2018 at 6:42 PM, Kuko Armas wrote:
>
> > Can you please attach vdsm and host-deploy logs?
>
> This is what I saw in engine.log
>
> 2018-02-15 13:49:26,850Z INFO
> [org.ovirt.engine.core.bll.host.HostConnectivityChecker]
> (EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Engi
On Thu, Feb 15, 2018 at 3:54 PM, Kuko Armas wrote:
>
> I'm not sure if I should submit a bug report about this, so I ask around
> here first...
> I've found a bug that "seems" related but I think it's not (
> https://bugzilla.redhat.com/show_bug.cgi?id=1523661)
>
> This is the problem:
>
> - I'm
> Can you please attach vdsm and host-deploy logs?
This is what I saw in engine.log
2018-02-15 13:49:26,850Z INFO
[org.ovirt.engine.core.bll.host.HostConnectivityChecker]
(EE-ManagedThreadFactory-engine-Thread-1) [15c7e33a] Engine managed to
communicate wi
th VDSM agent on host 'ovirt1' with
> In playing with this, I found that 4.2.1 hosted-engine will not install
> on a node with the ovirtmgmt interface being a vlan.
>
> Is this a still supported config? I see that access port, bonded and
> vlan tagged are supported by older versions..
That's **exactly** the same problem I just po
On 02/15/2018 11:10 AM, Michal Skrivanek wrote:
..snippity... with regards to oVirt 3.5
that’s a really old version….
I know I'll catch heat for this, but by "old" you mean like December of
2015? Just trying put things into perspective. Thus it goes with the
ancient and decrepit Red Hat En
Under the 3 dots as can be seen in the attached screenshot
On Thu, Feb 15, 2018 at 7:07 PM, Michal Skrivanek <
michal.skriva...@redhat.com> wrote:
>
>
> > On 15 Feb 2018, at 14:17, Andrei V wrote:
> >
> > Hi !
> >
> >
> > I can’t locate “Sparsify” disk image command anywhere in oVirt 4.2.
> > Wh
> On 15 Feb 2018, at 12:06, Mark Steele wrote:
>
> I have a host that is currently reporting down with NO VM's on it or
> associated with it. However when I attempt to put it into maintenance mode, I
> get the following error:
>
> Host hv-01 cannot change into maintenance mode - not all Vms
> On 15 Feb 2018, at 14:17, Andrei V wrote:
>
> Hi !
>
>
> I can’t locate “Sparsify” disk image command anywhere in oVirt 4.2.
> Where it have been moved ?
good question:)
Was it lost in GUI redesign?
>
>
> Thanks
> Andrei
>
>
> ___
> Users ma
> On 15 Feb 2018, at 16:37, Jason Keltz wrote:
>
> On 02/15/2018 08:48 AM, nico...@devels.es wrote:
>> Hi,
>>
>> We upgraded one of our infrastructures to 4.2.0 recently and since then some
>> of our machines have the "Console" button greyed-out in the Admin UI, like
>> they were disabled.
>
On Thu, Feb 15, 2018 at 5:56 PM, Simone Tiraboschi
wrote:
>
>
> On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis wrote:
>
>> In playing with this, I found that 4.2.1 hosted-engine will not install
>> on a node with the ovirtmgmt interface being a vlan.
>>
>
> Can you please attach vdsm and host-dep
On Thu, Feb 15, 2018 at 5:20 PM, Thomas Davis wrote:
> In playing with this, I found that 4.2.1 hosted-engine will not install on
> a node with the ovirtmgmt interface being a vlan.
>
Can you please attach vdsm and host-deploy logs?
> Is this a still supported config? I see that access port,
> On 15 Feb 2018, at 15:58, John Taylor wrote:
>
> Hi Nicolas,
> I had the same problem and it looked like it was because of some older
> vms (I believe from 3.6) that were configured with console with video
> type of CIRRUS and protocol VNC.
3.6 had cirrus indeed. That should work. Can you so
In playing with this, I found that 4.2.1 hosted-engine will not install
on a node with the ovirtmgmt interface being a vlan.
Is this a still supported config? I see that access port, bonded and
vlan tagged are supported by older versions..
thomas
On 02/05/2018 08:16 AM, Simone Tiraboschi wr
On 02/15/2018 08:48 AM, nico...@devels.es wrote:
Hi,
We upgraded one of our infrastructures to 4.2.0 recently and since
then some of our machines have the "Console" button greyed-out in the
Admin UI, like they were disabled.
I changed their compatibility to 4.2 but with no luck, as they're
The oVirt Project is pleased to announce the availability of the oVirt
4.2.2 First
Release Candidate, as of February 15th, 2018
This update is a release candidate of the second in a series of
stabilization updates to the 4.2
series.
This is pre-release software. This pre-release should not to be u
I'm not sure if I should submit a bug report about this, so I ask around here
first...
I've found a bug that "seems" related but I think it's not
(https://bugzilla.redhat.com/show_bug.cgi?id=1523661)
This is the problem:
- I'm trying to do a clean HE deploy with oVirt 4.2.1 on a clean CentOS 7
Hi Nicolas,
I had the same problem and it looked like it was because of some older
vms (I believe from 3.6) that were configured with console with video
type of CIRRUS and protocol VNC.
Tracing it out it showed that the vm libvirt xml was begin set to
headless. I tried different settings but the
On Thu, Feb 15, 2018 at 4:03 PM, Aliaksei Nazarenka <
aliaksei.nazare...@gmail.com> wrote:
> and how i can change network in the created VM?
>
It is not possible via manageiq. Only via ovirt.
>
> Sorry for my intrusive questions)))
>
> 2018-02-15 16:51 GMT+03:00 Aliaksei Nazarenka <
> aliaksei.
Hi,
We upgraded one of our infrastructures to 4.2.0 recently and since then
some of our machines have the "Console" button greyed-out in the Admin
UI, like they were disabled.
I changed their compatibility to 4.2 but with no luck, as they're still
disabled.
Is there a way to know why is th
On Thu, Feb 15, 2018 at 3:36 PM, Aliaksei Nazarenka <
aliaksei.nazare...@gmail.com> wrote:
> when i try to create network router, i see this message: *Unable to
> create Network Router "test_router": undefined method `[]' for nil:NilClass*
>
What ovn-provider version you're using? Can you please
Hi Alexey,
Please reply to the users list so all the user may enjoy the information.
Automatic sync of ovn networks to ovirt was added on version
ovirt-engine-4.2.1.3 (https://bugzilla.redhat.com/1511823).
If you use lower version you should import the network to ovirt manually
(networks tab -> i
Hi !
I can’t locate “Sparsify” disk image command anywhere in oVirt 4.2.
Where it have been moved ?
Thanks
Andrei
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On Thu, Feb 15, 2018 at 1:54 PM, Aliaksei Nazarenka <
aliaksei.nazare...@gmail.com> wrote:
> Error - 1 Minute Ago
> undefined method `orchestration_stacks' for # :InfraManager:0x0007bf9288> - I get this message if I try to create a
> network of overts and then try to check the status of the ne
15.02.2018 14:06, Mark Steele пишет:
Consider manual intervention
vdsClient -s 0 list table on your host
and then vdsClient -s 0 destroy vmID
Regards,
Alex.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I have a host that is currently reporting down with NO VM's on it or
associated with it. However when I attempt to put it into maintenance mode,
I get the following error:
Host hv-01 cannot change into maintenance mode - not all Vms have been
migrated successfully. Consider manual intervention: st
Good morning,
We had a storage crash early this morning that messed up a couple of our
ovirt hosts. Networking seemed to be the biggest issue. I have decided to
remove the bridge information in /etc/sysconfig/network-scripts and ip the
nics in order to re-import them into my ovirt installation (I
Hi,
I setup an hyperconverged solution with 3 nodes, hosted engine on glusterfs.
We run this setup in a PCI-DSS environment. According to PCI-DSS
requirements, we are required to reduce the validity of any certificate
under 39 months.
I saw in this link
https://www.ovirt.org/develop/release-mana
On Thu, Feb 15, 2018 at 1:08 AM, Jamie Lawrence
wrote:
> > On Feb 14, 2018, at 1:27 AM, Simone Tiraboschi
> wrote:
> > On Wed, Feb 14, 2018 at 2:11 AM, Jamie Lawrence <
> jlawre...@squaretrade.com> wrote:
> > Hello,
> >
> > I'm seeing the hosted engine install fail on an Ansible playbook step.
>
43 matches
Mail list logo
