Strahil,
Thanks a lot. You have a documentation about this settings?
Thanks
Holger
> On 8. Sep 2020, at 20:40, Strahil Nikolov wrote:
>
> You can extend the gluster volume with your extra 3 nodes.
> Keep in mind that it is good to have
> 'backup-volfile-servers=node2:node3:node4:node5:node6'
You can extend the gluster volume with your extra 3 nodes.
Keep in mind that it is good to have
'backup-volfile-servers=node2:node3:node4:node5:node6' in order to allow FUSE
to overcome failure of node1.
Best Regards,
Strahil Nikolov
В понеделник, 7 септември 2020 г., 20:48:55 Гринуич+3, H
You can use the following:
vim ~/.bashrc
alias virsh='virsh -c
qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf'
source ~/.bashrc
#Show host capabilities
virsh capabilities
Now repeat on the other nodes. Compare the CPU from the 3 outputs.
Best Regards,
Strahil Nikolov
What is the output of 'hosted-engine --vm-status' on the node where the
HostedEngine is running ?
Best Regards,
Strahil Nikolov
В понеделник, 7 септември 2020 г., 03:53:13 Гринуич+3, ddqlo
написа:
I could not find any logs because the migration button is disabled in the web
UI. It
Prajith,
many thanks for your reply. I'll take a look but seems exactly for what I
searched.
Thanks
Holger
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-
Just to give an update,
iSCSI has been running stably for the past 1+ months. I could only get a stable
multipath when I create two multipaths, one for network 172.27.0.x and one for
172.27.1.x, with their respective targets (2 per network).
The previous approach of a single multipath with all th
On Tue, Sep 8, 2020 at 12:18 PM wrote:
>
> I really don't understand why oVirt would remove/trade the diskless(load into
> RAM) feature away in oVirt node NG,
oVirt node legacy was never fully diskless in the sense that you refer
to. It used an ISO image loaded to a RAM disk and a readwrite
file
I really don't understand why oVirt would remove/trade the diskless(load into
RAM) feature away in oVirt node NG, this is a key point that makes some people
choose something like ESXi(that loads into RAM and therefor is not dependent of
the boot disk for running) over oVirt node NG. Do you think
On Tue, Sep 8, 2020 at 9:50 AM wrote:
>
> Hi, why does my ovirt hypervisor node crash when i pull the hypervisor boot
> drive?
> The following thread claims that the oVirt node hypervisor should lodad into
> memory, so boot disk failure shouldn't have any impact on a running node.
> https://list
On Tue, Sep 8, 2020 at 8:58 AM wrote:
>
> I am on step 5, but I am not sure what I am doing wrong. I get the following
> error. Any help will be appreciated.
>
>
>
> I have a subdomain, but I am not sure if it is needed.
>
> I am not sure if I have to add things in /etc/hosts
>
>
>
> [ INFO ] ok:
On Tue, Sep 8, 2020 at 10:39 AM wrote:
>
> I am new to oVirt and this is my first installation
> “https://ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engine_us
> ing_the_cockpit_web_interface/”
>
> Everything seems fine, but then when I tried step 5, "Hosted Engine
> Deployment" it k
On Tue, Sep 8, 2020 at 9:32 AM Michaël Couren wrote:
>
> Hi,
> Is there a "verified"* way to add a valid certificate to an oVirt 4.3 engine ?
> (or suppress HTTP Strict Transport Security)
> It is no more possible to add a security exception (on latest Firefox 80.0.1
> Linux)
> and I don't want
I am new to oVirt and this is my first installation
https://ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engine_us
ing_the_cockpit_web_interface/
Everything seems fine, but then when I tried step 5, "Hosted Engine
Deployment" it keep giving me this error. This information might be t
On Tue, Sep 8, 2020 at 4:33 AM ddqlo wrote:
> my hosts cpu:Intel Haswell-noTSX Family
>
> cluster cpu:Intel Haswell-noTSX Family
> HostedEngine vm cpu:Intel Haswell-noTSX Family
>
> When I tried to put the host in maintenance in web UI, I got an error:
>
>
Adding Arik. Arik - any idea what else t
Hello,
No, we have not made any such change.
Where is that done in ovirt ?
/Kishore
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code o
15 matches
Mail list logo
