[ovirt-users] Re: oVirt Node Crash

running 4.3.3? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Sandro Bonazzola Sent: 19 November 2020 10:00

[ovirt-users] Re: oVirt Node Crash

Hi Sandro, Have you perhaps seen anything in the SOS report that could shed some light on the issues? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg

[ovirt-users] Re: oVirt Node Crash

. ## Make this bigger for busy systems -b 8192 ## Set failure mode to syslog -f 1 Is it possible to upgrade the node to 4.4 while the engine is still on 4.3? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A

[ovirt-users] oVirt Node Crash

here? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za

[ovirt-users] Re: Manual VM Migration fails

: Enabled Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Sandro Bonazzola Sent: 26 October 2020 15:50 To: Anton

[ovirt-users] Re: SPICE proxy behind nginx reverse proxy

Hi Sandro, The engine is currently running on 4.3.9.4-1.el7 and the hosts are running oVirt Node 4.3.8 Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg

[ovirt-users] Re: Manual VM Migration fails

The strange thing is, if I power down a VM and then move it to the new host, I can power it back up successfully. I need to rebuild a few other hosts, so just nervous that if I place one of them into maintenance, the VMs are not going to migrate to the new host. Anton Louw Cloud Engineer

[ovirt-users] Re: Manual VM Migration fails

should I just make the jump and rebuild another host that’s CPU is Intel Westmere? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za

[ovirt-users] Re: Manual VM Migration fails

destination node was not compatible. Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Anton Louw Sent: 23 October 2020 16

[ovirt-users] Re: Random hosts disconnects

I see no solution has been posted. The subject of that email is: “VDSM HOST ISSUE - Message timeout which can be caused by communication issues” Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott

[ovirt-users] Re: Random hosts disconnects

ped. Do you think it is worth a shot increasing the vdsConnectionTimeout and vdsHeartbeatInSeconds to 40 for testing purposes? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street,

[ovirt-users] Re: Random hosts disconnects

centers are geographically split, could the “vdsHeartbeatInSeconds” potentially be the issue? Is it safe to increase this value after I add “vdsHeartbeatInSeconds.type=Integer” into my engine-config.properties file? Thanks Anton Louw Cloud Engineer: Storage and Virtualization

[ovirt-users] Promiscuous Mode

Hi All, I would like to deploy a VM that will monitor a specific network. I know in VMware you can set the port group to allow Promiscuous Mode. Is there something similar I can do in oVirt? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D

[ovirt-users] Management Engine IP change

g the FQDN. Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za ___ Users ma

[ovirt-users] Re: Failed to execute stage 'Environment customization': IPAddress() does not support netmasks or subnet prefixes! See documentation for details.

Hi James, You can remove the “/24” prefix after the IP address for the management VM. You will get prompts to add the netmask and gateway after you add the IP address. Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A

[ovirt-users] Re: Failing to restore a backup

=Log_Full --provision-db --provision-dwh-db --restore-permissions I ran the second command after I built a new HE from scratch. You just need to download the backup files from the original and copy them to the new HE before you restore. Give it a bash and see if it works for you. Cheers Anton

[ovirt-users] Re: broker.log not rotating

Hi Everybody, Thanks for all the responses. So I managed to truncate the log. I just want to make sure, the ‘ovirt-ha-agent’ service is only for the hosted engine correct? I can still migrate machines between the hosts, so it should then not impact the VMs? Thanks Anton Louw Cloud Engineer

[ovirt-users] broker.log not rotating

other nodes, and the broker.log file does not exceed 4GB. Thank you Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za

[ovirt-users] Some nodes periodically display as Non Responsive

its in DC2, and this does not happen to any of the hosts in DC2. It seems like the Engine loses connectivity to the hosts in DC1, and then cannot re-establish the connection. Is there anywhere I can check to get more insight into what is actually happening? Thanks Anton Louw Cloud Engineer: S

[ovirt-users] Re: oVirt noVNC

Hi Strahil, Yeah I figured the same. Thank you. Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Strahil Nikolov

[ovirt-users] Re: KeyCloak Integration

se 7.7.1908 (Core) KeyCloak – Server Version 10.0.1 Thanks a lot for your help Artur. Please let me know if you need anything else. From: Artur Socha Sent: 19 June 2020 12:39 To: Anton Louw ; users@ovirt.org Cc: Stephen Hutchinson Subject: Re: [ovirt-users] KeyCloak Integration On Fri, 2020-06-19

[ovirt-users] Re: KeyCloak Integration

Yes I didn’t get to the OVN part yet, as I first wanted to test the if the token can be obtained. This is the first time we are testing KeyCloak in any environment, so we have never been able to obtain a token for API access. Thanks From: Artur Socha Sent: 19 June 2020 12:16 To: Anton Louw

[ovirt-users] Re: KeyCloak Integration

;:"access_denied","error":"Cannot authenticate user Invalid scopes: ovirt-app-api ovirt-ext=token-info:authz-search ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate ovirt-ext=token:password-access."} 3) Does it work without OVN integration e

[ovirt-users] Recall: KeyCloak Integration

Anton Louw would like to recall the message, "[ovirt-users] KeyCloak Integration". Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtel

[ovirt-users] KeyCloak Integration

e added into KeyCloak (ovirt-app-api and ovirt-app-admin) https://blogs.ovirt.org/2019/01/federate-ovirt-engine-authentication-to-openid-connect-infrastructure/ Anybody have any ideas? Thank you Anton Louw Cloud Engineer: Storage and Virtualization __ D:

[ovirt-users] Re: Cannot authenticate user Invalid scopes: ovirt-app-api

straws here) I am starting to think that it would just be easier to deploy everything from scratch, but if anybody has any ideas, I would appreciate it. Thank you Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford

[ovirt-users] Cannot authenticate user Invalid scopes: ovirt-app-api

ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate ovirt-ext=token:password-access."}” Does anybody have any idea where this is going wrong? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rut

[ovirt-users] Re: oVirt noVNC

Thanks Paul, So the symbolic link has then been removed, as per the below. Not quite sure where to go from here. Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg

[ovirt-users] Re: oVirt noVNC

environment, there is a shortcut file (apached-ca.pem) which points to the ca.pem file, but on the environment that is not working, the apache-ca.pem file is not a shortcut. Could this perhaps be an issue? Thanks Anton Louw Cloud Engineer: Storage and Virtualization

[ovirt-users] Re: oVirt noVNC

Hi Kim, Hopefully 😊 I will still run through a couple of checks, I am sure it is something small I am missing. Was your issue due to owner and permissions? Yes, for some of our offerings we do use oVirt. Anton Louw Cloud Engineer: Storage and Virtualization

[ovirt-users] Re: oVirt noVNC

checked the websocket service and config, and it seems to be correct. The port is also open on the firewall. I can telnet to my FQDN on port 6100. This is breaking my spirit 😊 Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A

[ovirt-users] Re: oVirt noVNC

first mail, apologies 😊 Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Staniforth, Paul Sent: 12 June 2020

[ovirt-users] oVirt noVNC

Hi Everybody, With regards to noVNC, is it a requirement to install the CA into your local browser? I would like users to access their VM console, but with no additional work from their side, ie. Downloading the CA and importing it. Thank you Anton Louw Cloud Engineer: Storage and

[ovirt-users] Re: Global Maintenance

How will I go about updating the below: update vds_statistics set ha_global_maintenance=f; Thank you -Original Message- From: Yedidyah Bar David Sent: 09 June 2020 15:19 To: Anton Louw Cc: users@ovirt.org Subject: Re: [ovirt-users] Global Maintenance On Tue, Jun 9, 2020 at 9:39 AM Anto

[ovirt-users] Global Maintenance

ed when I moved my self-hosted engine to a standalone manager? Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@v

[ovirt-users] VM Networking

this was changed on the node networking side, or inside of the VM. Thank you Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za

[ovirt-users] Reconfigure Websocket Proxy

”, but after learning the hard way, I would rather not do that again 😊 Any other way anybody knows of? I want to completely remove it and then reinstall it. Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford

[ovirt-users] Re: Migrate hosted engine to standalone host

smoothly. Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Yedidyah Bar David Sent: 20 May 2020 11:59 To

[ovirt-users] Re: Migrate hosted engine to standalone host

second lab environment, everything shows as “down”, ie. Hosts, Data Center and Storage Domains. Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l

[ovirt-users] Migrate hosted engine to standalone host

the move, where it says that global maintenance is not enabled. How will this work if the hosted engine is not sitting on a oVirt node anymore? Any feedback\suggestions will be greatly appreciated. Thanks Anton Louw Cloud Engineer: Storage and Virtualization

[ovirt-users] Re: 503 Service Unavailable

Hi Didi, So still not sure what the issue was. I did the clean-up again, restored from the backup and it seems to be working again after a few tweaks. Thanks From: Yedidyah Bar David Sent: 12 May 2020 10:20 To: Anton Louw Cc: users@ovirt.org Subject: Re: [ovirt-users] 503 Service Unavailable

[ovirt-users] Re: 503 Service Unavailable

iled with error Bad Gateway and code 5050) 2020-05-12 09:58:04,328+02 INFO [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand] (EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa] Lock freed to

[ovirt-users] Re: 503 Service Unavailable

nance stopped=False Everything network related seems to run fine, I can connect to the engine via ssh etc. as well. From: Yedidyah Bar David Sent: 12 May 2020 09:26 To: Anton Louw Cc: users@ovirt.org Subject: Re: [ovirt-users] 503 Service Unavailable On Tue, May 12, 2020 at 9:53 AM Anton L

[ovirt-users] Re: Node Unresponsive

Oh I see, so just the service. Perfect, I will give that a bash as well. Just running through a couple more things. Thanks Paul Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley

[ovirt-users] Node Unresponsive

first test the VDSM and if that does not work, I will restart the engine. Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za

[ovirt-users] Re: User Groups

something? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Staniforth, Paul Sent: 29 April 2020 09:28 To

[ovirt-users] Re: Move Hosted Engine VM to a different storage domain

:55 To: Yedidyah Bar David ; Anton Louw Cc: users@ovirt.org Subject: Re: [ovirt-users] Re: Move Hosted Engine VM to a different storage domain On April 26, 2020 9:39:07 AM GMT+03:00, Yedidyah Bar David mailto:d...@redhat.com>> wrote: >On Fri, Apr 24, 2020 at 1:04 PM Anton Louw >ma

[ovirt-users] User Groups

Hi Everybody, Is there a way to see My Groups through the Web UI? I have tried looking around, but cannot see anything. Can this only be seen via the backend in the HE? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N

[ovirt-users] Move Hosted Engine VM to a different storage domain

perhaps give me some guidelines or a process I can follow? The reason I need to move the HE VM is because we are decommissioning the current storage array where the HE VM is located. Thank you very much Anton Louw Cloud Engineer: Storage and Virtualization __ D

[ovirt-users] Re: oVirt and KeyCloak intergration

Fantastic, thanks a lot for all your assistance Artur! From: Artur Socha Sent: 22 April 2020 14:52 To: Anton Louw ; users@ovirt.org Subject: Re: [ovirt-users] oVirt and KeyCloak intergration On Wed, 2020-04-22 at 14:43 +0200, Artur Socha wrote: On Wed, 2020-04-22 at 12:28 +, Anton Louw

[ovirt-users] Re: oVirt and KeyCloak intergration

Hi Artur, You are a champion! I can access oVirt now. Thank you so much. One last question, can I create additional groups in ie. Read Only, etc? And then will this be done in KeyCloak or in the oVIrt UI? Thank you From: Artur Socha Sent: 22 April 2020 13:21 To: Anton Louw ; users@ovirt.org

[ovirt-users] Re: oVirt and KeyCloak intergration

Ok so this is definitely looking better. I get an error, but at least now it is saying : “The user admin@openidchttp is not authorized to perform login” This is strange though, because admin in by default should be allowed access? Anton Louw Cloud Engineer: Storage and Virtualization

[ovirt-users] Re: oVirt and KeyCloak intergration

Perfect, I’ll test and let you know. Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Artur Socha Sent

[ovirt-users] oVirt and KeyCloak intergration

w. Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za ___ Users ma

[ovirt-users] Re: Mount ISO to VM

Hi Shani, Great, thank you very much. Do you perhaps know if I can access the storage domain if I SSH to a node? For instance, if I want to access a “datastore” in VMware, I SSH to a host and select /vmfs/volumes Is there anything like that available for oVirt? Thanks Anton Louw Cloud

[ovirt-users] Mount ISO to VM

Hi Everybody, Is there a way to mount an ISO to one of my VMs if I do not have an ISO domain, but the ISO file is on a Data domain? Thanks Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street

[ovirt-users] Migrate Hosted Engine to new Storage

Hi Everybody, Does anybody know when we will most likely be able to do a live storage migration of the Hosted Engine? I've been battling with the backup and restore way for a couple of days now already, and it is starting to feel like a fruitless exercise. Thanks Anton Louw Cloud Eng

[ovirt-users] Data Center, Cluster and Storage Domains show as "Down" after backup and restore

Hi Everybody, So I did a full backup of our HE, redeployed and restored. After the restore, I ran engine-setup on the newly deployed HE. I can access the the environment as per normal, the only issue is that everything still shows as "down", this includes hosts and VMs? Is there something I ne

[ovirt-users] Re: Moving Hosted Engine

https://lists.ovirt.org/archives/list/users@ovirt.org/message/NYLHUQPK72QUNLSZB2TMA4RWFOGLNX6P/<https://lists.ovirt.org/archives/list/users@ovirt.org/message/NYLHUQPK72QUNLSZB2TMA4RWFOGLNX6P> Anton Louw Cloud Engineer: Storage and Virtualization _

[ovirt-users] Moving Hosted Engine

Hi All, I am in serious need of some help. We currently have our Hosted Engine running on a Storage Domain, but that storage Domain is connected to a San that needs to be decommissioned. What would I need to do in order to get my Hosted Engine running on a different Storage Domain? Will I need

[ovirt-users] Storage Domain already attached to a Data Center

of my nodes? I would power up the old HE, but I have powered it off just before deploying a new HE. I am having the same issue with a node as well, so if there is a way to remove the node from the Data Center as well, that would be awesome. Thanks Anton Louw Cloud Engineer: Storage and

[ovirt-users] Re: Migrate engine from one storage domain to another

Hi, So I decided to just try the move, but I get the below error: “Error wwhile executing action: Cannot move virtual disk. The operation is not supported for HOSTED_ENGINE disks” Any idea if there is a different way to do this? Thanks Anton Louw Cloud Engineer: Storage and Virtualization

[ovirt-users] Migrate engine from one storage domain to another

Hi All, What would be the easiest way to migrate my hosted engine disk from one storage domain, to another? I see that I can click on the disk, and select move, but for some reason I feel nervous about it :) Thanks ___ Users mailing list -- users@ovi

[ovirt-users] ETL Service

th. I have attached the lines in the text document. If anybody could point me in the right direction, it would be greatly appreciated. Thank you Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Sc

[ovirt-users] Re: Changing the Data Warehouse Sampling Scale

Hi Yedidyah, After the fix that Paul pointed out, I can now see the data populating in all the daily tables. Thanks for your response From: Yedidyah Bar David Sent: 05 March 2020 08:59 To: Staniforth, Paul Cc: Anton Louw ; users@ovirt.org Subject: Re: [ovirt-users] Re: Changing the Data

[ovirt-users] Re: Changing the Data Warehouse Sampling Scale

Hi Paul, That is great news! Thanks so much for the reply. Cheers Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za

[ovirt-users] Changing the Data Warehouse Sampling Scale

Hi Everybody, I have a question. When oVirt was deployed in our environment by previous engineers, the DWH was installed as Basic. I would like to change this to Full, to get the daily stats, as this is now empty due to the scale. Is this just as simple as described in the following article: h