Good Day oVirt Community
I've experienced a condition whereby the HE on my three-node cluster will not
boot. Connecting to the hosted-engine console reveals that the hosted engine is
in the "grub rescue" prompt. I don't really know how to rescue the engine from
that level of failure but if anyb
If I change to "Other OS" or any flavor of Linux i get the same result. I've
changed the ISO to a W764 ISO as well with the same hang. More modern versions
of Windows Server boot fine, but I am not able to restore the backup with a
version higher than 2008R2.
This link "https://bugs.launchpad.n
Greetings oVirt team
I'm using "Version 4.5.7-0.master.20240327074810.git14bca0502d.el8 on CentOS
Stream 9"
I have occasion to restore a windows backup image for the purpose of data
extraction. To accomplish this I need to boot off a Server 2008R2 ISO. The
machine to be restored was UEFI based
Maria -
Likely you can repair the gluster volumes on that host with xfs_repair and you
most likely need to stop the gluster service on that node and unmount the
filesystems to do so.
After the filesystem is repaired you'll be able to mount them and start the
gluster service. From there gluster
You do have to use an FQDN to access it. The web management will not respond to
IP address requests. When you set up the engine, what FQDN did you use ? In the
hosts file of the machine you are using to access the engine, create an entry
for that website:
Example:
10.10.254.10 your.fqdm.tl
Thank you Sandro.
I solved the problem by manually configuring Gluster storage on my three nodes
and the running the engine-deploy utility to stand up the management engine.
I really appreciate you replying to my question. I know you're really busy.
__
I see you never got a reply on this question. What may I ask, did you finally
do to achieve the HCI of days gone by ?
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org
Good day all.
I'm in the process of deploying a fresh, new cluster and i'm running into a few
snags. I'm trying to use the cockpit environment to deploy the gluster storage
setup as I have previously done and it's failing consistently. I looked through
what I believe to be the current documenta
Good Day Strahil;
The OS did survive. The OS was on a RAID1 array and the gluster bricks are on a
RAID5 array. Since the time I requested guidance I did a whole lot of reading
and learning. I found in /etc/ansible several yaml files that contained the
configuration of the gluster bricks and the
Greetings oVirt community;
I've got a three-node HCI cluster with hosted engine and on one of the three
nodes I lost the underlying RAID array under the Gluster bricks. It looks like
I'm going to have to rebuild the RAID array and thus likely lose the Gluster
configuration that lives there. The
This worked for me. I was able to delete the bad snapshot reference and then
hose the VM. Thank you for the help !
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/pr
Attempting to create another snapshot fails with this snippit:
- Result: 'cleanSuccess'
-- Message: 'VDSGenericException: VDSErrorException: Failed in vdscommand to
HSMGetAllTasksStatusesVDS, error = Cannot create volume snapshot from illegal
volume: (u'576b2761-a5bc-427b-95a9-0594447f0705',)',
-
I just tried that clone method per your suggestion and I got "VDSM command
CopyImageVDS failed: Image is not a legal chain:
(u'6af66318-e6f8-45d7-8b4e-2183faf0a917',)"
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...
I've got a VM with a pair of snapshots that won't delete and I'm needing a
procedure to manually remove the snapshots. I don't need the VM and so while
i'd prefer not to destroy it, it wouldn't be critical if I did damage the VM in
the process. When I try to delete the snapshots that procedure f
I was able to remedy the situation with the command "./taskcleaner.sh -z -R -J
-A".
Thank you for your help in pointing me in the right direction.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy St
Thank you. I'll give that a try and report back.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/com
I'm thinking that I need to somehow stop the disk move, and then delete the
snapshot that existed prior to my attempt at moving the disk. Can someone
please tell me how to stop that disk move ?
___
Users mailing list -- users@ovirt.org
To unsubscribe se
I had occasion to shutdown a VM for the purpose of adding RAM and processor to
it and the VM willnot boot back up. I'm seeing "VM Issabel_PBX is down with
error. Exit message: Bad volume specification {'address': {'bus': '0',
'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'seri
Disregard this entry. I have solved my own problem by net research. It appears
that the default username has been changed from admin@internal to admin@ovirt.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Below is a clip from keycloak.log:
2022-06-29 10:19:07,007-05 WARN [org.keycloak.events] (default task-1) []
type=LOGIN_ERROR, realmId=0dd6bd82-1891-4dd9-b3bd-9d06b10de669,
clientId=ovirt-engine-internal, userId=null, ipAddress=10.1.1.243,
error=user_not_found, auth_method=openid-connect, aut
I have a fresh installation of a 4.5.1 hosted engine and the admin password I
set during the process isn't working. I reset the password for the admin user
from a root shell on the HE using the
ovirt-aaa-jdbc-tool utility and still no dice. I found a log file for
"keycloak" that I tailed while
Thank you very much for the tip. I was able to successfully deploy the engine
appliance on the gluster configuration that I deployed previously from the
cockpit interface.
I cannot log into the management portal via username and password and it
appears as though keycloak is the culprit.
I'll o
Today I reloaded all three nodes with the 4.5.1 ovirt node appliance iso.
During the install I used the gui to bond the two 10gig interfaces using the
recommended naming convention. I prepped the nodes according to the
documentation and invoked the cockpit installation method from node1. The
gl
I did use classic bonding and not teaming. I'm trying to install hyperconverged
three node oVirt cluster with self hosted engine. I've done it before in the
4.3 world but not in the 4.4 or 4.5 world.
I'm using the cockpit method for deploying the cluster from the first node from
the documentati
"No valid network interface has been found
If you are using Bonds or VLANs Use the following naming conventions: "
However I am using a supported naming convention. I've searched the forums and
the general WWW and read the articles that match my errors. i've tried some of
the options that are re
Hello oVirt Team
I'm in the process of deploying a three-node oVirt hyperconverged platform and
from the cockpit interface of the deployment node I keep running into the same
error. The system finishes the gluster deployment phase (sometimes) and then
prompts to continue with the hosted engine
Thank you Gilboa.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guideli
Thanks a bunch for the input Neal.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/c
Good Day All;
i am inquiring about which RHEL based distros are currently preferred and which
ones are currently supported. I know the oVirt project is a RH entity and so
RHEL and CentOS-Stream are the base offering. Would it, or is it, feasible for
Rocky 8.X, or Alma 8.X to be the base OS for
Thank you Abe, Angus, and Strahil. I appreciate your direction and input.
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
Thanks for the input Abe. For the dedicated migration network, would I need to
IP the bonds that I plan to use for that migration network and should they be
in an isolated vlan or should the bonds be sans IP in their own vlan ?
___
Users mailing list --
Good Day All;
I am in the process of assembling a new oVirt cluster and I am wondering if
there is any benefit to having a dedicated set of nics solely dedicated to VM
migration. If so, would those nics (bonded) be on their own vlan and subnet or
would they share a subnet with gluster storage o
Ovirt 4.3.9
HCI Gluster 3 Dell 730XD
Managed Engine
When I finished the "hosted engine deploy" I failed to add the gluster
storage according to the documentation and i'd like to get that back on
track.
1. I ticked the check box in the cluster configuration to "enable gluster
service", all of my c
Good Day To all;
oVirt 4.3.4.3-1.el7
6 Dell R710 oVirt Nodes
10 gig Infiniband iSCSI
Standalone Engine
After an error during scheduled automated VM backkup, the iSCSi datastore that
the VMs beinng backed up lived on suddenly went inactive and refuse to activate.
The backup job did not finish as
nd if more information is
needed please let me know.
~Clint Boggio
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
VM are both at the default 1500 MTU.
>
> How can I determine the MTU setting for the physical switches without admin
> access to them? Or do I need to ask the network team?
>
>
>
>> On 5/7/2018 2:03 PM, Clint Boggio wrote:
>> Randy this flaky layer two problem
Randy this flaky layer two problem reeks of a possible MTU situation between
your oVirt switches and your physical switches.
> On May 7, 2018, at 3:59 PM, Dominik Holler wrote:
>
> On Mon, 7 May 2018 11:43:51 -0700
> "Rue, Randy" wrote:
>
>> I've sort of had some progress. On Friday I went t
Forgive me if this is a duplicate, as I had spam filter problems previously
when I sent this inquiry.
Environment Rundown:
OVirt 4.2
6 CentOS 7.4 Compute Nodes Intel Xeon
1 CentOS 7.4 Dedicated Engine Node Intel Xeon
1 Datacenter
1 Storage Domain
1 Cluster
10Gig-E iSCSI Storage
10Gig-E NFS Ex
Environment Rundown:
OVirt 4.2
6 CentOS 7.4 Compute Nodes Intel Xeon
1 CentOS 7.4 Dedicated Engine Node Intel Xeon
1 Datacenter
1 Storage Domain
1 Cluster
10Gig-E iSCSI Storage
10Gig-E NFS Export Domain
20 VM’s of various OS’s and uses
The current cluster is using the Nehalem architecture.
I
like to avoid poking it with a
stick lol.
Clint Boggio
Cell 903.918.8461
Office 903.213.2523 ext. 210
On Jan 5, 2017, at 9:38 AM, Maton, Brett
mailto:mat...@ltresources.co.uk>> wrote:
Hopefully someone else will confirm or scream don't do it, before you try this.
In the past I'
Good day ovirt family.
I'm having trouble with a VM showing that the disk is locked after trying to
clone that VM to a new VM. The source machine was powered off when the clone
was initiated. The source and destination disks both show to be locked and are
currently un-usable. This situation was
That is correct. We are successfully using ib0 to access iSCSI and NFS on all
nodes.
We are now trying to create a network for the VMs to use on ib1.
> On Nov 16, 2016, at 1:40 PM, "users-requ...@ovirt.org"
> wrote:
>
> Adding Infiniband VM Network Fails
_
That is correct. The ib0 in all of the HV nodes are accessing iSCSI and NFS
over that IB link successfully.
What we are trying to do now is create a network that utilizes the second IB
port (ib1) on the cards for some of the virtual machines that live inside the
environment.
> On Nov 16, 2016,
Good Day;
I am trying to add an infiniband VM network to the hosts on my ovirt
deployment, and the network configuration on the hosts fails to save.
The network bridge is added successfully, but applying the bridge to the
IB1 nic fails with little information other than it failed.
My system:
Greetings OVirt Community
I have a production system that started life as a OV 3.6 system, and I've
recently upgraded the engine to 4.0. I see in the cluster config, a
configuration element that indicates the cluster functionality level. It has a
drop down that allows me to toggle between 3.6,
Yes i changed my browser from IE to Chrome and the dashboard loads
beautifully.
I should have checked that first and i apologize. Thank you for your
help.
On Wed, 2016-10-12 at 11:37 -0400, Rafael Martins wrote:
> - Original Message -
> >
> > From: "Clint Bo
Greetings ovirt community;
I have an oVirt environment with a dedicated engine, and 4
compute nodes all running CentOS 7, and oVirt 4.0.1.1. On the
management interface, the "Dashboard" tab displays "Loading" and the
spinning applet is working hard, but nothing ever materializes on
r, or storage domain for each team. Ovirt seems highly flexible in
this area so I was wondering if anyone has any suggestions.
Thanks very much!
Clint
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
I'm using oVirt Engine Version: 4.0.0.6-1.el7.centos and wanted to connect
an LDAP server. I went looking for engine-manage-domains on the engine
machine but it seems to be missing. Any ideas?
Thanks,
Clint
___
Users mailing list
Users@ovirt.org
s
>>
>> Martin Perina
>>
>>
>> On Mon, Aug 1, 2016 at 9:24 PM, Clint Boggio > <mailto:cbog...@inlinenetworks.com>> wrote:
>>
>>Stand Alone Engine Version 3.6.X
>>CentOS 7
>>
>>I was preparing to upgrade from OME
Stand Alone Engine Version 3.6.X
CentOS 7
I was preparing to upgrade from OME 3.6.2 to 4.0, when I followed the systems
instructions to "migrate" to ovirt-engine-aaa-ldap authentication from the
current authentication method. The management engine did fail to restart after
the process with the
1 00:50:56:8e:be:ca yes 0.00
2 fe:1a:4a:16:01:55 yes 0.00
2 fe:1a:4a:16:01:55 yes 0.00
Maybe this will give more clues as to what's going on.
Q: Please turn iptables/firewalld off.
A: I have tried this ('service iptables stop') and it doesn't seem to make
a differ
,
Clint
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Then restart your targetcli.
> Am 01.05.2016 1:51 nachm. schrieb "Clint Boggio" :
>> Greetings oVirt Family;
>>
>> Due to catastrophic power failure, my datacenter lost power. I am using a
>> CentOS7 server to provide ISCSI services to my OVirt platform.
&
Greetings oVirt Family;
Due to catastrophic power failure, my datacenter lost power. I am using a
CentOS7 server to provide ISCSI services to my OVirt platform.
When the power came back on, and the iscsi server booted back up, the filters
in lvm.conf were faulty and LVM assumed control over the
n Apr 20, 2016, at 3:19 PM, Nir Soffer wrote:
>
>> On Wed, Apr 20, 2016 at 10:42 PM, Clint Boggio wrote:
>> I grepped out the engine logs until i found reference to the illegal
>> disk in question. The log indicates that the image has been flagged
>> illegal because the
> I?m trying to use the vhostmd vdsm host to access ovirt
> > node
> > metrics from within a VM. Vhostmd is running and updating
> > the
> > /dev/shm/vhostmd0 on the ovirt node.
> >
> > The part I?m stuck on is: ?This disk i
set the VM's in a usable status status again ?
On Mon, 2016-04-18 at 12:39 +, Markus Stockhausen wrote:
> >
> > Von: users-boun...@ovirt.org [users-boun...@ovirt.org]" im
> > Auftrag von "Clint Boggio [cl...@theboggios.com]
> > Gesendet: Montag, 18. A
apshots as they appear in the GUI. ALL of the
UUID's illustrated show as broken symbolic links in the storage domains.
On Tue, 2016-04-19 at 21:28 +0300, Nir Soffer wrote:
> On Mon, Apr 18, 2016 at 3:16 PM, Clint Boggio
> wrote:
> >
> > OVirt 3.6, 4 node cluster
Markus thank you so much for the information. I'll be focusing on resolution of
this problem this week and I'll keep you in the loop.
On Apr 18, 2016, at 7:39 AM, Markus Stockhausen wrote:
>> Von: users-boun...@ovirt.org [users-boun...@ovirt.org]" im Auftrag von
Thank you I will read on the link provided and follow the course.
> On Apr 18, 2016, at 7:20 AM, Ollie Armstrong wrote:
>
>> On 18 April 2016 at 13:16, Clint Boggio wrote:
>> Several of my VM snapshot disks show to be in an "illegal state". The system
>> w
Yes i did try that and the system would not allow it.
> On Apr 18, 2016, at 7:27 AM, Raz Tamir wrote:
>
> Hi Clint,
> Did you try to remove the relevant snapshots with illegal disks?
> In case you do, the removal failed or passed?
>
> See this: https://bugzilla.redha
ted and was lost due to "cannot get
volume size for domain xxx".
I fear that in this current condition, should any of the other machine reboot,
they too will be lost.
How can I troubleshoot this problem further, and hopefully alleviate the
Greetings users;
I've got a single VM in a 3.6 environment that is in a down state after
and attempt at creating a snapshot via script, and exporting said
snapshot to the export domain. I see some indications of what could
possibly be wrong in the filtered engine.log, and i'm at a loss on how
to
Thank you Simone !
> On Mar 22, 2016, at 8:44 AM, Simone Tiraboschi wrote:
>
>
>
>> On Fri, Mar 18, 2016 at 5:27 PM, Clint Boggio wrote:
>> Greetings all, and Happy Friday;
>>
>> I'm running oVirt 3.6 management engine that is currently oversee
Greetings all, and Happy Friday;
I'm running oVirt 3.6 management engine that is currently overseeing 4
compute nodes, attached to iSCSI storage over Infiniband. The compute
nodes have 8 hot-swap hard drive slots, with each only having 2 slots
occupied in a hardware RAID array level one for the hy
That worked like a charm. I'll add that to my cheat sheet.
Thank you for your help !
> On Mar 9, 2016, at 3:00 PM, Douglas Landgraf wrote:
>
> Hi Clint,
>
>> On Wed, Mar 9, 2016 at 2:52 PM, Clint Boggio wrote:
>> I had a keyboard problem and entered the wron
I had a keyboard problem and entered the wrong password for admin@internal
enough times to finally lock the account.
How do I recover from this ?
OVirt engine 3.6.2
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/use
comes to ovirt-node or rhev-h, is there anything required to
be installed on the hypervisor hosts themselves?
Thanks,
Chris
On Mar 5, 2016 1:47 PM, "combuster" wrote:
Hi Clint, you might want to check the macspoof hook features here:
https://github.com/oVirt/vdsm/tree/master/vdsm_h
related question on this.
When it comes to ovirt-node or rhev-h, is there anything required to
be installed on the hypervisor hosts themselves?
Thanks,
Chris
On Mar 5, 2016 1:47 PM, "combuster" wrote:
Hi Clint, you might want to check the macspoof hook features here:
https://github.com/
I am deploying an OpenVPN server in my OVirt environment and I've come to a
dead stop with the developer support on a topic related to OVirt configuration.
The developer wants me to put the VM's underlying NIC into promiscuous mode.
I've seen this in a VMware environment and I know what they are
you again
> On Feb 29, 2016, at 6:24 AM, Richard W.M. Jones wrote:
>
>> On Mon, Feb 29, 2016 at 01:44:19PM +0200, Moran Goldboim wrote:
>> +Richard, v2v maintainer.
>>
>>> On Sat, Feb 27, 2016 at 8:45 PM, Clint Boggio wrote:
>>>
>>> I'm
I'm in the process of migrating a series of VM's from KVM environment, to an
OVirt environment. I've used virt-v2v to convert quite a few M$ and Linux
machines with great success.
Coming up I've got to convert a Linux VM that has 3 virtual disks. Inside that
VM, the three disks are part of an
73 matches
Mail list logo