Re: [Users] adding multiple interfaces with different networks

[Kevin Maziere Aubry]

Hi Mike


2013/2/6 Mike Kolesnik 

> --
>
> Hi
>
> Ovirt:  3.2
>
>
> I agree, I removed it on a DC that has no host and the option on the
> network tree is removed.
> But when I add host to the DC again, and edit their network interface, the
> ovirtgmgt is seen with the "vm" icon.
>
> This sounds like a result of the network not being in sync.
> Currently, the host is installed with a "VM" management network
> automatically (there is work to change that)
> If the network is defined as "non VM" on the data center level, you will
> still see it as a VM network in the "setup networks" command on the host.
>
> And the ovirtmgmt is configured has static, and I can't change that.
>
> This is because it's "unsynchronized".
>
>  Also the ovirtmgmt network is mark "unsynchronized", I don't know what it
> mean and how to fix it
> http://www.ovirt.org/SetupNetworks_SyncNetworks#How_to_Sync_Network.3F
>
> You need to select the "synchronize this network" checkbox in the "edit"
> dialog which you see the boot protocol on, it's at the bottom of the dialog.
>
> Ok on chrome the display is too small and the checkbox is hidden. .. it
works fine

>   
> Also I can't add a network to the host, I have no error message, but in
> events I can see
> Bridged network Internet is attached to multiple interfaces:  on
> Host node2.
> Host node1's following network(s) are not synchronized with their Logical
> Network configuration: ovirtmgmt.
> So I think that unsync network cause all my trouble.
>
> Indeed, except the possible bug in the error that states "", once
> you will synchronize the network this all will not be happening.
>
> Well it seems to be a bug, I can see this message for all the network I
try to add, even if I've deleted them from ovirt.
And configuration files from deleted networks are still present into the
node


>
> Kevin
>
>
> 2013/2/4 Mike Kolesnik 
>
>> --
>>
>> Hi
>>
>> Hi Kevin,
>>
>>
>> I've tested to uncheck the box "vm network" on ovirt 3.2 and there is an
>> error message saying that the interface must be remove on all hosts
>> (hypervisor) that are using it.
>> The VM network is separate from the admin network, so I sound like a bug
>> :(
>>
>> It isn't a bug, it is a check that is being made to make sure nothing
>> will "break" if you change a network's property (VM or not, the VLAN ID,
>> the MTU).
>> If you have a host that already has this network set-up on it, then it
>> will become unsynchronized with the logical definition of the network,
>> meaning that it might fail to run your VMs.
>>
>> This is why it states that in order to change any of these properties,
>> you need to remove the network from the host.
>>
>> If you want to change these properties on a management network, then the
>> data center that has this network mustn't have any hosts when you change
>> the properties.
>>
>> Regards,
>> Mike
>>
>>
>> Kevin
>>
>>
>> 2013/1/23 Mike Kolesnik 
>>
>>> --
>>>
>>> Hi
>>>
>>> I have exactly the same issue.
>>> This mean that a 1Gb (at least) interface must be dedicated to the
>>> ovirtmgmt interface, which is not a good idea.
>>>
>>> Can you please try marking the ovirtmgmt network as "non-vm" network,
>>> syncing it with the hosts, and then try to add VLAN networks on the same
>>> bond (or interface)?
>>>
>>> You should probably do this with latest versions of oVirt/VDSM.
>>>
>>>  Kevin
>>>
>>>
>>> 2012/12/26 Jonathan Horne 
>>>
   2012-12-26 16:48:56,416 ERROR
 [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
 (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method
 2012-12-26 16:48:56,417 ERROR
 [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
 (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and error
 message VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
 error = bonding 'bond2' is already member of network 'ovirtmgmt'
 2012-12-26 16:48:56,418 ERROR
 [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
 (ajp--0.0.0.0-8009-8) [2d2d6184]
 org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
 VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
 bonding 'bond2' is already member of network 'ovirtmgmt'
 2012-12-26 16:48:56,418 ERROR
 [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--0.0.0.0-8009-8)
 [2d2d6184] Command SetupNetworksVDS execution failed. Exception:
 RuntimeException:
 org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
 VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
 bonding 'bond2' is already member of network 'ovirtmgmt'


  so im guessing… i can't have my vlan3204 or vlan3202 share an
 interface with ovirtmgmt?

  [root@d0lppc021 ~]# rpm -qa|grep ovirt
 ovirt-engi

Re: [Users] adding multiple interfaces with different networks

[Mike Kolesnik]

- Original Message -

> Hi

> Ovirt: 3.2

> I agree, I removed it on a DC that has no host and the option on the
> network tree is removed.
> But when I add host to the DC again, and edit their network
> interface, the ovirtgmgt is seen with the "vm" icon.
This sounds like a result of the network not being in sync. 
Currently, the host is installed with a "VM" management network automatically 
(there is work to change that) 
If the network is defined as "non VM" on the data center level, you will still 
see it as a VM network in the "setup networks" command on the host. 

> And the ovirtmgmt is configured has static, and I can't change that.
This is because it's "unsynchronized". 

> Also the ovirtmgmt network is mark "unsynchronized", I don't know
> what it mean and how to fix it
> http://www.ovirt.org/SetupNetworks_SyncNetworks#How_to_Sync_Network.3F
You need to select the "synchronize this network" checkbox in the "edit" dialog 
which you see the boot protocol on, it's at the bottom of the dialog. 

> Also I can't add a network to the host, I have no error message, but
> in events I can see
> Bridged network Internet is attached to multiple interfaces:
>  on Host node2.

> Host node1's following network(s) are not synchronized with their
> Logical Network configuration: ovirtmgmt.

> So I think that unsync network cause all my trouble.
Indeed, except the possible bug in the error that states "", once you 
will synchronize the network this all will not be happening. 

> Kevin

> 2013/2/4 Mike Kolesnik < mkole...@redhat.com >

> > > Hi
> > 
> 
> > Hi Kevin,
> 

> > > I've tested to uncheck the box "vm network" on ovirt 3.2 and
> > > there
> > > is
> > > an error message saying that the interface must be remove on all
> > > hosts (hypervisor) that are using it.
> > 
> 
> > > The VM network is separate from the admin network, so I sound
> > > like
> > > a
> > > bug :(
> > 
> 
> > It isn't a bug, it is a check that is being made to make sure
> > nothing
> > will "break" if you change a network's property (VM or not, the
> > VLAN
> > ID, the MTU).
> 
> > If you have a host that already has this network set-up on it, then
> > it will become unsynchronized with the logical definition of the
> > network, meaning that it might fail to run your VMs.
> 

> > This is why it states that in order to change any of these
> > properties, you need to remove the network from the host.
> 

> > If you want to change these properties on a management network,
> > then
> > the data center that has this network mustn't have any hosts when
> > you change the properties.
> 

> > Regards,
> 
> > Mike
> 

> > > Kevin
> > 
> 

> > > 2013/1/23 Mike Kolesnik < mkole...@redhat.com >
> > 
> 

> > > > > Hi
> > > > 
> > > 
> > 
> 

> > > > > I have exactly the same issue.
> > > > 
> > > 
> > 
> 
> > > > > This mean that a 1Gb (at least) interface must be dedicated
> > > > > to
> > > > > the
> > > > > ovirtmgmt interface, which is not a good idea.
> > > > 
> > > 
> > 
> 

> > > > Can you please try marking the ovirtmgmt network as "non-vm"
> > > > network,
> > > > syncing it with the hosts, and then try to add VLAN networks on
> > > > the
> > > > same bond (or interface)?
> > > 
> > 
> 

> > > > You should probably do this with latest versions of oVirt/VDSM.
> > > 
> > 
> 

> > > > > Kevin
> > > > 
> > > 
> > 
> 

> > > > > 2012/12/26 Jonathan Horne < jho...@skopos.us >
> > > > 
> > > 
> > 
> 

> > > > > > 2012-12-26 16:48:56,416 ERROR
> > > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > > > > (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS
> > > > > > method
> > > > > 
> > > > 
> > > 
> > 
> 
> > > > > > 2012-12-26 16:48:56,417 ERROR
> > > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > > > > (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING
> > > > > > and
> > > > > > error message VDSGenericException: VDSErrorException:
> > > > > > Failed
> > > > > > to
> > > > > > SetupNetworksVDS, error = bonding 'bond2' is already member
> > > > > > of
> > > > > > network 'ovirtmgmt'
> > > > > 
> > > > 
> > > 
> > 
> 
> > > > > > 2012-12-26 16:48:56,418 ERROR
> > > > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > > > > (ajp--0.0.0.0-8009-8) [2d2d6184]
> > > > > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > > > > > VDSGenericException: VDSErrorException: Failed to
> > > > > > SetupNetworksVDS,
> > > > > > error = bonding 'bond2' is already member of network
> > > > > > 'ovirtmgmt'
> > > > > 
> > > > 
> > > 
> > 
> 
> > > > > > 2012-12-26 16:48:56,418 ERROR
> > > > > > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > > > > > (ajp--0.0.0.0-8009-8) [2d2d6184] Command SetupNetworksVDS
> > > > > > execution
> > > > > > failed. Exception: RuntimeException:
> > > > > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > > > > > VDSGenericException: VDSErrorException: Failed to
> > > > > > SetupNetworksVDS,
> > > > >

Re: [Users] adding multiple interfaces with different networks

[Kevin Maziere Aubry]

Hi

Ovirt:  3.2


I agree, I removed it on a DC that has no host and the option on the
network tree is removed.
But when I add host to the DC again, and edit their network interface, the
ovirtgmgt is seen with the "vm" icon.
And the ovirtmgmt is configured has static, and I can't change that.
Also the ovirtmgmt network is mark "unsynchronized", I don't know what it
mean and how to fix it
http://www.ovirt.org/SetupNetworks_SyncNetworks#How_to_Sync_Network.3F
Also I can't add a network to the host, I have no error message, but in
events I can see
Bridged network Internet is attached to multiple interfaces:  on
Host node2.
Host node1's following network(s) are not synchronized with their Logical
Network configuration: ovirtmgmt.
So I think that unsync network cause all my trouble.

Kevin


2013/2/4 Mike Kolesnik 

> --
>
> Hi
>
> Hi Kevin,
>
>
> I've tested to uncheck the box "vm network" on ovirt 3.2 and there is an
> error message saying that the interface must be remove on all hosts
> (hypervisor) that are using it.
> The VM network is separate from the admin network, so I sound like a bug :(
>
> It isn't a bug, it is a check that is being made to make sure nothing will
> "break" if you change a network's property (VM or not, the VLAN ID, the
> MTU).
> If you have a host that already has this network set-up on it, then it
> will become unsynchronized with the logical definition of the network,
> meaning that it might fail to run your VMs.
>
> This is why it states that in order to change any of these properties, you
> need to remove the network from the host.
>
> If you want to change these properties on a management network, then the
> data center that has this network mustn't have any hosts when you change
> the properties.
>
> Regards,
> Mike
>
>
> Kevin
>
>
> 2013/1/23 Mike Kolesnik 
>
>> --
>>
>> Hi
>>
>> I have exactly the same issue.
>> This mean that a 1Gb (at least) interface must be dedicated to the
>> ovirtmgmt interface, which is not a good idea.
>>
>> Can you please try marking the ovirtmgmt network as "non-vm" network,
>> syncing it with the hosts, and then try to add VLAN networks on the same
>> bond (or interface)?
>>
>> You should probably do this with latest versions of oVirt/VDSM.
>>
>>  Kevin
>>
>>
>> 2012/12/26 Jonathan Horne 
>>
>>>   2012-12-26 16:48:56,416 ERROR
>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
>>> (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method
>>> 2012-12-26 16:48:56,417 ERROR
>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
>>> (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and error
>>> message VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
>>> error = bonding 'bond2' is already member of network 'ovirtmgmt'
>>> 2012-12-26 16:48:56,418 ERROR
>>> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
>>> (ajp--0.0.0.0-8009-8) [2d2d6184]
>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
>>> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
>>> bonding 'bond2' is already member of network 'ovirtmgmt'
>>> 2012-12-26 16:48:56,418 ERROR
>>> [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--0.0.0.0-8009-8)
>>> [2d2d6184] Command SetupNetworksVDS execution failed. Exception:
>>> RuntimeException:
>>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
>>> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
>>> bonding 'bond2' is already member of network 'ovirtmgmt'
>>>
>>>
>>>  so im guessing… i can't have my vlan3204 or vlan3202 share an
>>> interface with ovirtmgmt?
>>>
>>>  [root@d0lppc021 ~]# rpm -qa|grep ovirt
>>> ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
>>> ovirt-engine-cli-3.1.0.7-1.el6.noarch
>>> ovirt-image-uploader-3.1.0-16.el6.noarch
>>> ovirt-engine-backend-3.1.0-3.19.el6.noarch
>>> ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
>>> ovirt-iso-uploader-3.1.0-16.el6.noarch
>>> ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
>>> ovirt-engine-config-3.1.0-3.19.el6.noarch
>>> ovirt-log-collector-3.1.0-16.el6.noarch
>>> ovirt-engine-restapi-3.1.0-3.19.el6.noarch
>>> ovirt-engine-userportal-3.1.0-3.19.el6.noarch
>>> ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
>>> ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
>>> ovirt-engine-3.1.0-3.19.el6.noarch
>>> ovirt-engine-jbossas711-1-0.x86_64
>>> ovirt-engine-setup-3.1.0-3.19.el6.noarch
>>> ovirt-engine-sdk-3.1.0.5-1.el6.noarch
>>>
>>>
>>>
>>> --
>>> This is a PRIVATE message. If you are not the intended recipient, please
>>> delete without copying and kindly advise us by e-mail of the mistake in
>>> delivery. NOTE: Regardless of content, this e-mail shall not operate to
>>> bind SKOPOS to any order or other contract unless pursuant to explicit
>>> written agreement or government initiative expressly permitting the use of
>>> e-mail for such purpose.

Re: [Users] adding multiple interfaces with different networks

[Mike Kolesnik]

- Original Message -

> Hi
Hi Kevin, 

> I've tested to uncheck the box "vm network" on ovirt 3.2 and there is
> an error message saying that the interface must be remove on all
> hosts (hypervisor) that are using it.
> The VM network is separate from the admin network, so I sound like a
> bug :(
It isn't a bug, it is a check that is being made to make sure nothing will 
"break" if you change a network's property (VM or not, the VLAN ID, the MTU). 
If you have a host that already has this network set-up on it, then it will 
become unsynchronized with the logical definition of the network, meaning that 
it might fail to run your VMs. 

This is why it states that in order to change any of these properties, you need 
to remove the network from the host. 

If you want to change these properties on a management network, then the data 
center that has this network mustn't have any hosts when you change the 
properties. 

Regards, 
Mike 

> Kevin

> 2013/1/23 Mike Kolesnik < mkole...@redhat.com >

> > > Hi
> > 
> 

> > > I have exactly the same issue.
> > 
> 
> > > This mean that a 1Gb (at least) interface must be dedicated to
> > > the
> > > ovirtmgmt interface, which is not a good idea.
> > 
> 

> > Can you please try marking the ovirtmgmt network as "non-vm"
> > network,
> > syncing it with the hosts, and then try to add VLAN networks on the
> > same bond (or interface)?
> 

> > You should probably do this with latest versions of oVirt/VDSM.
> 

> > > Kevin
> > 
> 

> > > 2012/12/26 Jonathan Horne < jho...@skopos.us >
> > 
> 

> > > > 2012-12-26 16:48:56,416 ERROR
> > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > > (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS
> > > > method
> > > 
> > 
> 
> > > > 2012-12-26 16:48:56,417 ERROR
> > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > > (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and
> > > > error message VDSGenericException: VDSErrorException: Failed to
> > > > SetupNetworksVDS, error = bonding 'bond2' is already member of
> > > > network 'ovirtmgmt'
> > > 
> > 
> 
> > > > 2012-12-26 16:48:56,418 ERROR
> > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > > > (ajp--0.0.0.0-8009-8) [2d2d6184]
> > > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > > > VDSGenericException: VDSErrorException: Failed to
> > > > SetupNetworksVDS,
> > > > error = bonding 'bond2' is already member of network
> > > > 'ovirtmgmt'
> > > 
> > 
> 
> > > > 2012-12-26 16:48:56,418 ERROR
> > > > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > > > (ajp--0.0.0.0-8009-8) [2d2d6184] Command SetupNetworksVDS
> > > > execution
> > > > failed. Exception: RuntimeException:
> > > > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > > > VDSGenericException: VDSErrorException: Failed to
> > > > SetupNetworksVDS,
> > > > error = bonding 'bond2' is already member of network
> > > > 'ovirtmgmt'
> > > 
> > 
> 

> > > > so im guessing… i can't have my vlan3204 or vlan3202 share an
> > > > interface with ovirtmgmt?
> > > 
> > 
> 

> > > > [root@d0lppc021 ~]# rpm -qa|grep ovirt
> > > 
> > 
> 
> > > > ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-cli-3.1.0.7-1.el6.noarch
> > > 
> > 
> 
> > > > ovirt-image-uploader-3.1.0-16.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-backend-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-iso-uploader-3.1.0-16.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-config-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-log-collector-3.1.0-16.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-restapi-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-userportal-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-jbossas711-1-0.x86_64
> > > 
> > 
> 
> > > > ovirt-engine-setup-3.1.0-3.19.el6.noarch
> > > 
> > 
> 
> > > > ovirt-engine-sdk-3.1.0.5-1.el6.noarch
> > > 
> > 
> 

> > > > This is a PRIVATE message. If you are not the intended
> > > > recipient,
> > > > please delete without copying and kindly advise us by e-mail of
> > > > the
> > > > mistake in delivery. NOTE: Regardless of content, this e-mail
> > > > shall
> > > > not operate to bind SKOPOS to any order or other contract
> > > > unless
> > > > pursuant to explicit written agreement or government initiative
> > > > expressly permitting the use of e-mail for such purpose.
> > > 
> > 
> 
> > > > ___
> > > 
> > 
> 
> > > > Users mailing list
> > > 
> > 
> 
> > > > Users@ovirt.org
> > > 
> > 
> 
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > > 
>

Re: [Users] adding multiple interfaces with different networks

[Kevin Maziere Aubry]

Hi

I've tested to uncheck the box "vm network" on ovirt 3.2 and there is an
error message saying that the interface must be remove on all hosts
(hypervisor) that are using it.
The VM network is separate from the admin network, so I sound like a bug :(

Kevin


2013/1/23 Mike Kolesnik 

> --
>
> Hi
>
> I have exactly the same issue.
> This mean that a 1Gb (at least) interface must be dedicated to the
> ovirtmgmt interface, which is not a good idea.
>
> Can you please try marking the ovirtmgmt network as "non-vm" network,
> syncing it with the hosts, and then try to add VLAN networks on the same
> bond (or interface)?
>
> You should probably do this with latest versions of oVirt/VDSM.
>
>  Kevin
>
>
> 2012/12/26 Jonathan Horne 
>
>>   2012-12-26 16:48:56,416 ERROR
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
>> (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method
>> 2012-12-26 16:48:56,417 ERROR
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
>> (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and error
>> message VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
>> error = bonding 'bond2' is already member of network 'ovirtmgmt'
>> 2012-12-26 16:48:56,418 ERROR
>> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
>> (ajp--0.0.0.0-8009-8) [2d2d6184]
>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
>> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
>> bonding 'bond2' is already member of network 'ovirtmgmt'
>> 2012-12-26 16:48:56,418 ERROR
>> [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--0.0.0.0-8009-8)
>> [2d2d6184] Command SetupNetworksVDS execution failed. Exception:
>> RuntimeException:
>> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
>> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
>> bonding 'bond2' is already member of network 'ovirtmgmt'
>>
>>
>>  so im guessing… i can't have my vlan3204 or vlan3202 share an interface
>> with ovirtmgmt?
>>
>>  [root@d0lppc021 ~]# rpm -qa|grep ovirt
>> ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
>> ovirt-engine-cli-3.1.0.7-1.el6.noarch
>> ovirt-image-uploader-3.1.0-16.el6.noarch
>> ovirt-engine-backend-3.1.0-3.19.el6.noarch
>> ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
>> ovirt-iso-uploader-3.1.0-16.el6.noarch
>> ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
>> ovirt-engine-config-3.1.0-3.19.el6.noarch
>> ovirt-log-collector-3.1.0-16.el6.noarch
>> ovirt-engine-restapi-3.1.0-3.19.el6.noarch
>> ovirt-engine-userportal-3.1.0-3.19.el6.noarch
>> ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
>> ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
>> ovirt-engine-3.1.0-3.19.el6.noarch
>> ovirt-engine-jbossas711-1-0.x86_64
>> ovirt-engine-setup-3.1.0-3.19.el6.noarch
>> ovirt-engine-sdk-3.1.0.5-1.el6.noarch
>>
>>
>>
>> --
>> This is a PRIVATE message. If you are not the intended recipient, please
>> delete without copying and kindly advise us by e-mail of the mistake in
>> delivery. NOTE: Regardless of content, this e-mail shall not operate to
>> bind SKOPOS to any order or other contract unless pursuant to explicit
>> written agreement or government initiative expressly permitting the use of
>> e-mail for such purpose.
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
>
> --
>
> Kevin Mazière
> Responsable Infrastructure
> Alter Way – Hosting
>  1 rue Royal - 227 Bureaux de la Colline
> 92213 Saint-Cloud Cedex
> Tél : +33 (0)1 41 16 38 41
> Mob : +33 (0)7 62 55 57 05
>  http://www.alterway.fr
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>


-- 

Kevin Mazière
Responsable Infrastructure
Alter Way – Hosting
 1 rue Royal - 227 Bureaux de la Colline
92213 Saint-Cloud Cedex
Tél : +33 (0)1 41 16 38 41
Mob : +33 (0)7 62 55 57 05
 http://www.alterway.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] adding multiple interfaces with different networks

[Mike Kolesnik]

- Original Message -

> Hi

> I have exactly the same issue.
> This mean that a 1Gb (at least) interface must be dedicated to the
> ovirtmgmt interface, which is not a good idea.

Can you please try marking the ovirtmgmt network as "non-vm" network, syncing 
it with the hosts, and then try to add VLAN networks on the same bond (or 
interface)? 

You should probably do this with latest versions of oVirt/VDSM. 

> Kevin

> 2012/12/26 Jonathan Horne < jho...@skopos.us >

> > 2012-12-26 16:48:56,416 ERROR
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method
> 
> > 2012-12-26 16:48:56,417 ERROR
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and
> > error message VDSGenericException: VDSErrorException: Failed to
> > SetupNetworksVDS, error = bonding 'bond2' is already member of
> > network 'ovirtmgmt'
> 
> > 2012-12-26 16:48:56,418 ERROR
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> > (ajp--0.0.0.0-8009-8) [2d2d6184]
> > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
> > error = bonding 'bond2' is already member of network 'ovirtmgmt'
> 
> > 2012-12-26 16:48:56,418 ERROR
> > [org.ovirt.engine.core.vdsbroker.VDSCommandBase]
> > (ajp--0.0.0.0-8009-8) [2d2d6184] Command SetupNetworksVDS execution
> > failed. Exception: RuntimeException:
> > org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> > VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
> > error = bonding 'bond2' is already member of network 'ovirtmgmt'
> 

> > so im guessing… i can't have my vlan3204 or vlan3202 share an
> > interface with ovirtmgmt?
> 

> > [root@d0lppc021 ~]# rpm -qa|grep ovirt
> 
> > ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-cli-3.1.0.7-1.el6.noarch
> 
> > ovirt-image-uploader-3.1.0-16.el6.noarch
> 
> > ovirt-engine-backend-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
> 
> > ovirt-iso-uploader-3.1.0-16.el6.noarch
> 
> > ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-config-3.1.0-3.19.el6.noarch
> 
> > ovirt-log-collector-3.1.0-16.el6.noarch
> 
> > ovirt-engine-restapi-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-userportal-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-jbossas711-1-0.x86_64
> 
> > ovirt-engine-setup-3.1.0-3.19.el6.noarch
> 
> > ovirt-engine-sdk-3.1.0.5-1.el6.noarch
> 

> > This is a PRIVATE message. If you are not the intended recipient,
> > please delete without copying and kindly advise us by e-mail of the
> > mistake in delivery. NOTE: Regardless of content, this e-mail shall
> > not operate to bind SKOPOS to any order or other contract unless
> > pursuant to explicit written agreement or government initiative
> > expressly permitting the use of e-mail for such purpose.
> 
> > ___
> 
> > Users mailing list
> 
> > Users@ovirt.org
> 
> > http://lists.ovirt.org/mailman/listinfo/users
> 

> --

> Kevin Mazière
> Responsable Infrastructure
> Alter Way – Hosting
> 1 rue Royal - 227 Bureaux de la Colline
> 92213 Saint-Cloud Cedex
> Tél : +33 (0)1 41 16 38 41
> Mob : +33 (0)7 62 55 57 05
> http://www.alterway.fr
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] adding multiple interfaces with different networks

[Kevin Maziere Aubry]

Hi

I have exactly the same issue.
This mean that a 1Gb (at least) interface must be dedicated to the
ovirtmgmt interface, which is not a good idea.

Kevin


2012/12/26 Jonathan Horne 

>   2012-12-26 16:48:56,416 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> (ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method
> 2012-12-26 16:48:56,417 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> (ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and error
> message VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS,
> error = bonding 'bond2' is already member of network 'ovirtmgmt'
> 2012-12-26 16:48:56,418 ERROR
> [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase]
> (ajp--0.0.0.0-8009-8) [2d2d6184]
> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
> bonding 'bond2' is already member of network 'ovirtmgmt'
> 2012-12-26 16:48:56,418 ERROR
> [org.ovirt.engine.core.vdsbroker.VDSCommandBase] (ajp--0.0.0.0-8009-8)
> [2d2d6184] Command SetupNetworksVDS execution failed. Exception:
> RuntimeException:
> org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException:
> VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error =
> bonding 'bond2' is already member of network 'ovirtmgmt'
>
>
>  so im guessing… i can't have my vlan3204 or vlan3202 share an interface
> with ovirtmgmt?
>
>  [root@d0lppc021 ~]# rpm -qa|grep ovirt
> ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
> ovirt-engine-cli-3.1.0.7-1.el6.noarch
> ovirt-image-uploader-3.1.0-16.el6.noarch
> ovirt-engine-backend-3.1.0-3.19.el6.noarch
> ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
> ovirt-iso-uploader-3.1.0-16.el6.noarch
> ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
> ovirt-engine-config-3.1.0-3.19.el6.noarch
> ovirt-log-collector-3.1.0-16.el6.noarch
> ovirt-engine-restapi-3.1.0-3.19.el6.noarch
> ovirt-engine-userportal-3.1.0-3.19.el6.noarch
> ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
> ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
> ovirt-engine-3.1.0-3.19.el6.noarch
> ovirt-engine-jbossas711-1-0.x86_64
> ovirt-engine-setup-3.1.0-3.19.el6.noarch
> ovirt-engine-sdk-3.1.0.5-1.el6.noarch
>
>
>
> --
> This is a PRIVATE message. If you are not the intended recipient, please
> delete without copying and kindly advise us by e-mail of the mistake in
> delivery. NOTE: Regardless of content, this e-mail shall not operate to
> bind SKOPOS to any order or other contract unless pursuant to explicit
> written agreement or government initiative expressly permitting the use of
> e-mail for such purpose.
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 

Kevin Mazière
Responsable Infrastructure
Alter Way – Hosting
 1 rue Royal - 227 Bureaux de la Colline
92213 Saint-Cloud Cedex
Tél : +33 (0)1 41 16 38 41
Mob : +33 (0)7 62 55 57 05
 http://www.alterway.fr
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] adding multiple interfaces with different networks

[Jonathan Horne]

2012-12-26 16:48:56,416 ERROR 
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] 
(ajp--0.0.0.0-8009-8) [2d2d6184] Failed in SetupNetworksVDS method
2012-12-26 16:48:56,417 ERROR 
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] 
(ajp--0.0.0.0-8009-8) [2d2d6184] Error code ERR_BAD_BONDING and error message 
VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = 
bonding 'bond2' is already member of network 'ovirtmgmt'
2012-12-26 16:48:56,418 ERROR 
[org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] 
(ajp--0.0.0.0-8009-8) [2d2d6184] 
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: 
VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = 
bonding 'bond2' is already member of network 'ovirtmgmt'
2012-12-26 16:48:56,418 ERROR [org.ovirt.engine.core.vdsbroker.VDSCommandBase] 
(ajp--0.0.0.0-8009-8) [2d2d6184] Command SetupNetworksVDS execution failed. 
Exception: RuntimeException: 
org.ovirt.engine.core.vdsbroker.vdsbroker.VDSErrorException: 
VDSGenericException: VDSErrorException: Failed to SetupNetworksVDS, error = 
bonding 'bond2' is already member of network 'ovirtmgmt'


so im guessing… i can't have my vlan3204 or vlan3202 share an interface with 
ovirtmgmt?

[root@d0lppc021 ~]# rpm -qa|grep ovirt
ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch
ovirt-engine-cli-3.1.0.7-1.el6.noarch
ovirt-image-uploader-3.1.0-16.el6.noarch
ovirt-engine-backend-3.1.0-3.19.el6.noarch
ovirt-engine-tools-common-3.1.0-3.19.el6.noarch
ovirt-iso-uploader-3.1.0-16.el6.noarch
ovirt-engine-genericapi-3.1.0-3.19.el6.noarch
ovirt-engine-config-3.1.0-3.19.el6.noarch
ovirt-log-collector-3.1.0-16.el6.noarch
ovirt-engine-restapi-3.1.0-3.19.el6.noarch
ovirt-engine-userportal-3.1.0-3.19.el6.noarch
ovirt-engine-notification-service-3.1.0-3.19.el6.noarch
ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch
ovirt-engine-3.1.0-3.19.el6.noarch
ovirt-engine-jbossas711-1-0.x86_64
ovirt-engine-setup-3.1.0-3.19.el6.noarch
ovirt-engine-sdk-3.1.0.5-1.el6.noarch




This is a PRIVATE message. If you are not the intended recipient, please delete 
without copying and kindly advise us by e-mail of the mistake in delivery. 
NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to 
any order or other contract unless pursuant to explicit written agreement or 
government initiative expressly permitting the use of e-mail for such purpose.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] adding multiple interfaces with different networks

[Jonathan Horne]

From: Jonathan Horne mailto:jho...@skopos.us>>
Date: Wednesday, December 26, 2012 2:30 PM
To: "users@ovirt.org<mailto:users@ovirt.org>" 
mailto:users@ovirt.org>>
Subject: [Users] adding multiple interfaces with different networks

i am trying to set up an ovirt cluster, each node has 4 interfaces.  em1 and 
em2 are bond2 (mode1), and their IP is the static IP of the node.  no problems 
there (the only problem is that it tries to set it back to DHCP each time i go 
into the config page, but thats easy to get around by re-checking static every 
time i do)

p3p1 and p3p2 are bond4 (mode4), and this is to be my backend iscsi traffic 
only.  VM data will share the other bond2 interface.  but each time i click 
"setup host networks" and assign the iscsi VLAN to the bond4, and assign IP 
address (only IP and net mask boxes appear there is no gateway box which this 
is fine by me, iscsi is all layer 2 anyway), check the save box and click OK, i 
get back to the hosts page and there is no IP address for the 2nd interface 
bond4.

how do i get around this?  am i going about this wrong?

thanks for any help,
jonathan





at this point, i got the iscsi network up, but i just assigned it right onto 
the bond4 by hand, and not using the web-gui.  not comfortable with that at all 
as i get near my production deployment.

but now i go to add a new vlan to the same interface as ovirtmgmt, but now the 
webgui errors out with internal error when i click OK to add to the interface.  
i cannot find a reliable document to read up on that tells me how to configure 
multiple vlans sharing interfaces.  this is what i need to figure out:

bond2(mode1)
em1/em2
ovirtmgmt
VLAN3202
VLAN3204

bond4(mode4)
p3p1/p3p2
VLAN3210

vlan 3210 is my iscsi, and that is working for the moment, but i doubt that did 
it right (i.e., as i said i didn't use the webgui, i just did it by hand).  if 
i try to add 3202 or 3204 to bond2, the gui errors.

i have no idea where to start digging this out, so any tips would be 
appreciated (especially if you know of a good document that describes 
multi-vlans per interface).

thanks
jonathan



This is a PRIVATE message. If you are not the intended recipient, please delete 
without copying and kindly advise us by e-mail of the mistake in delivery. 
NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to 
any order or other contract unless pursuant to explicit written agreement or 
government initiative expressly permitting the use of e-mail for such purpose.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] adding multiple interfaces with different networks

[Jonathan Horne]

i am trying to set up an ovirt cluster, each node has 4 interfaces.  em1 and 
em2 are bond2 (mode1), and their IP is the static IP of the node.  no problems 
there (the only problem is that it tries to set it back to DHCP each time i go 
into the config page, but thats easy to get around by re-checking static every 
time i do)

p3p1 and p3p2 are bond4 (mode4), and this is to be my backend iscsi traffic 
only.  VM data will share the other bond2 interface.  but each time i click 
"setup host networks" and assign the iscsi VLAN to the bond4, and assign IP 
address (only IP and net mask boxes appear there is no gateway box which this 
is fine by me, iscsi is all layer 2 anyway), check the save box and click OK, i 
get back to the hosts page and there is no IP address for the 2nd interface 
bond4.

how do i get around this?  am i going about this wrong?

thanks for any help,
jonathan


This is a PRIVATE message. If you are not the intended recipient, please delete 
without copying and kindly advise us by e-mail of the mistake in delivery. 
NOTE: Regardless of content, this e-mail shall not operate to bind SKOPOS to 
any order or other contract unless pursuant to explicit written agreement or 
government initiative expressly permitting the use of e-mail for such purpose.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users