Hi all,
I have this issue when I go to create a VM, I want to run WSL2 but when I
install it or windows defender application guard the computer bluescreens.
So I am using CentOS 8 stream host connected to a VirtIO cluster the hardware
is 2 Nvidia Tesla P40 graphics cards installed on a powered
I have an oVirt cluster running 4.3.10 on older hardware with a cluster
CPU type of Intel Nehalem. I needed to install a Windows 10 (latest
release) VM, which oVirt rejected because of the CPU model. I remember
there being issues with certain versions of Windows and this CPU model
under oVirt (I
I recently added a Windows 10 Pro 64 bit (release 1909) VM, and I'm seeing
a lot of failures when oVirt tries to move the VM to another host
(triggered by load balancing),
These errors are showing up in the UI event log
Migration failed (VM: , Source: , Destination: ).
Followed by:
VM is down
I have successfully setup a centos vm, its up and running. Now I need to
setup a windows 10 VM and I cant seem to get anything to work.
Ive tried setting the OS type to other or Windows 10 64bit. With Windows
64bit, it fails to startup at all When I select OtherOS it will allow
me to start to
Hello Guys
In my enviroment Ovirt 4.2 when create a new VM with Windows 10, in the
boot options menu, add the Floppy Disk for mount virtio driver but only
show me sysprep.
I check in my ISO Folder and show all vfd drivers for Windows and ISO but I
can not add the drivers who floppy.
This problem
Hi
Why when en try to do a Windows 10 machine i have a error on the cpu guest
os not supported but not windows 8 or 7?
Thanks,
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www
oVirt Guest Tools 4.2-1.el7.centos & QEMU guest agent v7.5 are installed.
When I try & take a snapshot, I get this warning:
"The VM will be paused while saving the memory
Could not detect Guest Agent on the VM.
Note that without a Guest Agent the data on the created snapshot may be
inconsistent.
VMs use a vNIC on ovirtmgmt logical network. There should be nothing to do with
the engine itself.
It was working fine for us after we are able to load the drivers properly.
> On 3 Feb 2018, at 23:07, Vincent Royer wrote:
>
> Thanks I tried it and it did in fact work. Just threw me off bec
Thanks I tried it and it did in fact work. Just threw me off because all
the instructions say to load the floppy.
My windows install got right up to the point where it was loading the NICs,
and then it all came crashing down. I expected the VMs and the engine to
be able to share the same NIC, bu
We had to do the swapping CD trick for Windows 10 yes.
Regards,
--
Dr Christophe Trefois, Dipl.-Ing.
Technical Specialist / Post-Doc
UNIVERSITÉ DU LUXEMBOURG
LUXEMBOURG CENTRE FOR SYSTEMS BIOMEDICINE
Campus Belval | House of Biomedicine
6, avenue du Swing
L-4367 Belvaux
T: +352 46 66 44
I am trying to install Windows 10 on Ovirt 4.2
I pushed the virtio-win iso and vfd files to my ISO domain. I created the
VM and loaded the CD rom with the windows install ISO and in the "run once"
settings I chose the virtio-win selection as a floppy. However when
entering windows setup, there
> On 22 Jul 2016, at 22:58, Blaster wrote:
>
>
>> On Jul 22, 2016, at 4:27 AM, Michal Skrivanek
>> wrote:
>>
>>
>>> On 21 Jul 2016, at 20:05, Blaster wrote:
>>>
>>> I am running an application called Blue Iris which records video from IP
>>> cameras.
>>>
>>> This was working great under
On Fri, Jul 22, 2016 at 03:58:56PM -0500, Blaster wrote:
> I did try a clean install. Both an upgrade and a fresh install cause a blue
> screen. How do I pin point the blue screen?
In my case I could solve this issue by changing the number of (virtual)
CPUs to only 1 for the Windows 10 VM. The Wi
> On Jul 22, 2016, at 4:27 AM, Michal Skrivanek
> wrote:
>
>
>> On 21 Jul 2016, at 20:05, Blaster wrote:
>>
>> I am running an application called Blue Iris which records video from IP
>> cameras.
>>
>> This was working great under Ovirt 3.6.3 + Windows 7. Now I’ve upgraded to
>> Windows
> On 21 Jul 2016, at 20:05, Blaster wrote:
>
> I am running an application called Blue Iris which records video from IP
> cameras.
>
> This was working great under Ovirt 3.6.3 + Windows 7. Now I’ve upgraded to
> Windows 10 and as soon as the Blue Iris service starts, the VM blue screens.
>
I am running an application called Blue Iris which records video from IP cameras.This was working great under Ovirt 3.6.3 + Windows 7. Now I’ve upgraded to Windows 10 and as soon as the Blue Iris service starts, the VM blue screens.I talked to the software vendor, and they said it’s not their prob
*À :* Jean-Marie Perron
> *Cc :* Uwe Laverenz ; users@ovirt.org
>
> *Objet :* Re: [ovirt-users] Windows 10
>
>
>
>
>
>
>
> On Fri, Mar 11, 2016 at 3:12 PM, Jean-Marie Perron <
> jean-marie.per...@viseo.com> wrote:
>
> Hi Uwe,
>
> Thank you for y
Is it planned a development of WDDM driver for Windows 10 fully support with
SPICE ?
Jean-Marie
De : Sandro Bonazzola [mailto:sbona...@redhat.com]
Envoyé : lundi 14 mars 2016 08:04
À : Jean-Marie Perron
Cc : Uwe Laverenz ; users@ovirt.org
Objet : Re: [ovirt-users] Windows 10
On Fri, Mar 11
e Uwe Laverenz
> Envoyé : vendredi 11 mars 2016 10:49
> À : users@ovirt.org
> Objet : Re: [ovirt-users] Windows 10
>
> Hi,
>
> Am 10.03.2016 um 17:18 schrieb Jean-Marie Perron:
> > Hello,
> >
> > OVirt 3.6.3 is installed on CentOS 7.
> >
> > I use 64-bi
À : users@ovirt.org
Objet : Re: [ovirt-users] Windows 10
Hi,
Am 10.03.2016 um 17:18 schrieb Jean-Marie Perron:
> Hello,
>
> OVirt 3.6.3 is installed on CentOS 7.
>
> I use 64-bit Windows 10 client with spice display.
>
> After installing the spice-guest-tools and oVirt-tools-set
On Fri, Mar 11, 2016 at 10:48 AM, Uwe Laverenz wrote:
> Hi,
>
> Am 10.03.2016 um 17:18 schrieb Jean-Marie Perron:
>
>> Hello,
>>
>> OVirt 3.6.3 is installed on CentOS 7.
>>
>> I use 64-bit Windows 10 client with spice display.
>>
>> After installing the spice-guest-tools and oVirt-tools-setup on
Hi,
Am 10.03.2016 um 17:18 schrieb Jean-Marie Perron:
Hello,
OVirt 3.6.3 is installed on CentOS 7.
I use 64-bit Windows 10 client with spice display.
After installing the spice-guest-tools and oVirt-tools-setup on the VM
Windows 10, the display always lag and slow.
The display on a Windows 7
+1
I am facing the same scenario for Windows 8, 8.1 and 10
On Thu, Mar 10, 2016 at 9:48 PM, Jean-Marie Perron <
jean-marie.per...@viseo.com> wrote:
> Hello,
>
>
>
> OVirt 3.6.3 is installed on CentOS 7.
>
>
>
> I use 64-bit Windows 10 client with spice display.
>
>
>
> After installing the spice
Hello,
OVirt 3.6.3 is installed on CentOS 7.
I use 64-bit Windows 10 client with spice display.
After installing the spice-guest-tools and oVirt-tools-setup on the VM Windows
10, the display always lag and slow.
The display on a Windows 7 VM is fluid.
On Device Manager and Display adapters, I
gt;
>
> From: "Koen Vanoppen"
> To: "Yaniv Dary"
> Cc: "users"
> Sent: Friday, November 27, 2015 7:14:11 AM
> Subject: Re: [ovirt-users] Windows 10
>
> Thanks!
>
> On 26 November 2015 at 16:27, Yaniv Dary wrote:
> Windows 10 guest w
ind regards
> Raymond
>
>
>
> --
> *From: *"Koen Vanoppen"
> *To: *"Yaniv Dary"
> *Cc: *"users"
> *Sent: *Friday, November 27, 2015 7:14:11 AM
> *Subject: *Re: [ovirt-users] Windows 10
>
> Thanks!
>
> On 2
5 7:14:11 AM
Subject: Re: [ovirt-users] Windows 10
Thanks!
On 26 November 2015 at 16:27, Yaniv Dary < yd...@redhat.com > wrote:
Windows 10 guest will only work on 3.6 with fedora or el7.2 hosts. Might work
with el6 as some point. but currently doesn't.
Yaniv Dary
Technical Prod
Thanks!
On 26 November 2015 at 16:27, Yaniv Dary wrote:
> Windows 10 guest will only work on 3.6 with fedora or el7.2 hosts. Might
> work with el6 as some point. but currently doesn't.
>
> Yaniv Dary
> Technical Product Manager
> Red Hat Israel Ltd.
> 34 Jerusalem Road
> Building A, 4th floor
>
Windows 10 guest will only work on 3.6 with fedora or el7.2 hosts. Might
work with el6 as some point. but currently doesn't.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: yd..
Dear all,
Yes, onther question :-). This time it's about windows 10.
I'm running ovirt 3.5.4 and I don't manage to install windows 10 on it.
Keeps giving me a blue screen (yes, I know, it's still a windows... ;-) )
on reboot.
Are there any special settings you need to enable when creating the vm?
30 matches
Mail list logo
