The situation you got to (where there are ovirtmgmt bridges over both
bond0 directly and over the bond0.231 VLAN device), likely via manual
intervention, is indeed inconsistent from oVirt's perspective.
You should be able to SSH into the host and run something like "brctl
delif ovirtmgmt bond0", t
Hello Bojan,
I'm still having difficulties understanding the exact situation. Could
you please click the "Refresh Capabilities" button in the hosts tab when
the relevant host is selected and supply a screenshot of the Setup Host
Networks dialog on that host afterwards. Then explain what about that
I have a hosted engine. It is on the same VLAN as the hosts are, so I am
not having connectivity issues. I am not going to alter that part of the
setup but I do need to add more networks, and I can not because I can
not save the configuration, no matter what I change it is not saved.
Ovirtmgmt is
I have enabled the VLAN tagging but no dice. Still I cannot attach
logical network to the VLANS in oVirt, and I see them represented in the
list, like this:
namebond vlan Network nameaddress
eth0bond0.50ovirtmgmt
bond0
eth1
On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote:
> Hello, I am having a strange issue in creating ovirtmgmt bridge over
> vlan interface.
>
> I have set-up a bond from physical interfaces. On top of a bond there
> are three VLANs one of which is in ovirtmgmt bridge. I have set it up
Hi Bojan,
Did you configure a VLAN tag für your ovirtmgmt interface?
You have to do this in „Data Centers“ – select dc – „Logical Networks“.
Afterwards you should be able to configure network from oVirt webadmin
interface again.
Don’t have a test s
6 matches
Mail list logo
