Hi
For test purposes I'm configuring cluster with ballooning enabled and memory
over-commit set to 200% with one host (total memory 128600 MB) connected. I
then create 4 linux based VM's and I set the following on each: memory size:
62000MB, max memory: 248000MB (default value set when memory
Hello,
In my case I currently have a cluster with hosts with cpu Intel E5-2680 v4
(each socket with 14 cores) and their Cluster is set as "Intel Broadwell
Family" and I would like to add in the same oVirt Cluster two more hosts
with Intel E5-2640 v4 cpus (each socket 10 cores) that should be the sa
The matrix is basically Intel ARK - oVirt, from my understanding, will
set the cluster to the minimum supported set of instructions. Meaning if
they are identical instruction sets across all CPU's - then nothing is
lost, but if even 1 CPU in the cluster has less available features then
the rest
Hi all,
I have a working setup of oVirt (currently 4.3.7) as self-hosted engine
consisting of three virtualization hosts. Each of them has several VMs with
public IP addresses which work fine.
The problem is with virtual networks created on "ovirt-provider-ovn". I can
create a new network with
>> Good morning,
>>
> >Check SELinux just in case.
>
>Indeed, please do.
>
For testing, I have set SELinux to permissive on the oVirt host. The NFS server
is Debian based and does not use SELinux.
>> Here's my config:
>>
> >NFS server:
> >/etc/exports:
> >/data/ovirt
> >*(rw,sync,no_subtree_chec
Hi,
I'm trying to register hosts running CentOS 7.6 and oVirt 4.3.5 to a Red
Hat Satellite 6.4 server. The oVirt hosts have katello-host-tools-3.5.1
packages from oVirt repos, which seem to be too new for the Red Hat
Satellite 6.4 server, Satellite says:
Errata:
Could not calculate errata st
I have a thread going reference the NFS permission issue.
Going to move all my replies into that since it is not a direct issue with the
hosted engine.
Thanks for your replies.
From: Yedidyah Bar David
Sent: Tuesday, December 10, 2019 1:46 AM
To: Robert Webb
Cc
On 10/12/2019 04:58, jeremy_tourvi...@hotmail.com wrote:
I have a server which runs a project from Github called SecGen. SecGen uses
Vagrant to provision VMs from templates. When I go to my project folder and
run vagrant up I get an error.
user@localhost:~/bin/SecGen/projects/SecGen2019120
Il giorno mar 10 dic 2019 alle ore 15:41 Matthias Leopold <
matthias.leop...@meduniwien.ac.at> ha scritto:
> Hi,
>
> I'm trying to register hosts running CentOS 7.6 and oVirt 4.3.5 to a Red
> Hat Satellite 6.4 server. The oVirt hosts have katello-host-tools-3.5.1
> packages from oVirt repos, which
First I would like to apologize for the delay in replying. The message
went into the spam box and just now I realized.
Secondly, I have a server with oVirt installed. The version is 4.1. I
have two Export Domain, one on IP A and another on IP B. The ED on IP A
is working correctly, but not on
thanks, but all this is given
other CentOS 7 hosts (with katello* packages provided by the Satellite
server) are OK
at the moment I'm looking into https://access.redhat.com/solutions/3517471
I'll ask our Satellite admin tomorrow
Regards
Matthias
Am 10.12.19 um 17:28 schrieb Staniforth, Paul:
Just wanted to close this out.
Now that I have solved my NFS issues, I completed a clean install of oVirt node
on two Dell R410's and ran the self hosted engine wizard on one of them. The
install went flawless and I now have a working setup.
Thanks for the time and patience from everyone who he
> On 10 Dec 2019, at 11:57, Joseph Goldman wrote:
>
> The matrix is basically Intel ARK - oVirt, from my understanding, will set
> the cluster to the minimum supported set of instructions. Meaning if they are
> identical instruction sets across all CPU's - then nothing is lost, but if
> even
Why do you use 'all_squash' ?
all_squashMap all uids and gids to the anonymous user. Useful for NFS-exported
public FTP directories, news spool directories, etc. The opposite option isĀ
no_all_squash, which is the default setting.
Best Regards,
Strahil NikolovOn Dec 10, 2019 07:46, Tony Brian A
Hi Pavel Nakonechnyi,
>
> However, if such VMs are on different hosts, then no packets are received on
> both VMs.
>
> Could you please suggest me a way to properly debug and fix this problem? I
> would like to be able to distribute several VMs connected to the single
> virtual network across
I should have caught that. This is my first time using this project so I sort
of thought I might have a config issue (my fault) Yes, I agree after reviewing
https://github.com/myoung34/vagrant-ovirt4 I see the example file lists "api"
at the end of the url. I'll confirm later today.
Hi Eyal,
Have you had time to see the logs? Any idea what's going on? Could you
or anyone else reproduce this on version 4.3.6.7-1.el7?
On 12/9/19 2:26 PM, Valentin Bajrami wrote:
>
> Hi Eyal,
>
> Although I've attached the log files, I couldn't find anything useful
> myself. See if you can make
Hi Pavel,
Can you explain how did you find the issue.
I'm new in OVN and I experience the same symptoms .
I'm not sure what will be the best approach to start cleanly with OVN.
Best Regards,
Strahil NikolovOn Dec 10, 2019 19:06, Pavel Nakonechnyi
wrote:
>
> Hi Pavel Nakonechnyi,
>
> >
> > H
Hi All,
It seems that I have several devices listed in 'ovs-vsctl list interface'
despite removing all networks except ovirtmgmt.
Can someone tell me which devices I should leave (so I can remove the rest) ?
Thanks in advance.
Best Regards,
Strahil Nikolov
On Dec 10, 2019 21:50, Strahil wrote
Hello Donagh,
memory size e.g. 62000MB is the memory the VM tells
the O/S is available you should be able to see how much is actually used if the
agent is installed.
maximum memory e.g. 248000MB is the amount you can
hot-plug for the VM otherw
20 matches
Mail list logo