Re: [ovirt-users] oVirt management network

2015-03-31 Thread Bojan Popovic
I have enabled the VLAN tagging but no dice. Still I cannot attach
logical network to the VLANS in oVirt, and I see them represented in the
list, like this:

namebond   vlan Network nameaddress

eth0bond0.50ovirtmgmt
bond0   
eth1bond0.60
  ovirtmgmt
-

Also since ip address is added to a ovirtmgmt bridge, I can not save any
additional configuration until I resolve this because it ovirt says that
there are two interfaces with the same IP address.


System-Email

Mit freundlichen Grüßen / Best Regards
Bojan Popovic
System Administrator | IT Novi Sad


Tel: +49 (0) 711/ 320 90 285

www.jago24.de http://www.jago24.de
www.jago-ag.de http://www.jago-ag.de  
E-Mail: bojan.popo...@jago-ag.de mailto:bojan.popo...@jago-ag.de  

http://www.jago24.de


JAGO AG
Amtsgericht Stuttgart

Ingersheimer Str.12
Reg.Nr.: HRB 741306 
D-70499 Stuttgart
USt-ID: DE283513307

Vorstand:
WEEE-Reg.-Nr. DE 70299572   
Goran Jakovac


Aufsichtsratsvorsitzender:  

Dipl.-oec. Univ. Rolf Breyer





Jago_AG_logo




 

On 30.03.2015. 13:14, René Koch wrote:

 Hi Bojan,

  

 Did you configure a VLAN tag für your ovirtmgmt interface?

 You have to do this in „Data Centers“ – select dc – „Logical Networks“.

 Afterwards you should be able to configure network from oVirt webadmin
 interface again.

 Don’t have a test setup with VLAN tags for ovirtmgmt atm, but did this
 multiple times before…

  


 Regards,

 René

  

  

 *Von:*users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *Im
 Auftrag von *Bojan Popovic
 *Gesendet:* Montag, 30. März 2015 12:15
 *An:* users@ovirt.org
 *Betreff:* [ovirt-users] oVirt management network

  

 Hello, I am having a strange issue in creating ovirtmgmt bridge over
 vlan interface.

 I have set-up a bond from physical interfaces. On top of a bond there
 are three VLANs one of which is in ovirtmgmt bridge. I have set it up
 manually according to http://www.ovirt.org/Bonding_VLAN_Bridge

 Somehow the bond itself is also added to bridge in oVirt web
 interface, after reboot there also were two added lines to
 configuration of that bond:
 # Generated by VDSM version 4.16.10-8.gitc937927.el7
 BRIDGE=ovirtmgmt

 No matter how I try to remove the bond from the bridge it doesn't
 succeed. If I edit the config files manually it isn't replicated to
 web interface. If I try to detach it from web interface, I can only
 attach bridge back to the bond interface. Of course configuration
 cannot be saved until the bridge is attached to an interface.

 I have tried putting the host in maintenance mode, shutting down the
 hosted engine and doing all the changes live.

 Anyone has a suggestion how to resolve this?

 Thanks.


   
   

  


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt management network

2015-03-31 Thread Lior Vernia
The situation you got to (where there are ovirtmgmt bridges over both
bond0 directly and over the bond0.231 VLAN device), likely via manual
intervention, is indeed inconsistent from oVirt's perspective.

You should be able to SSH into the host and run something like brctl
delif ovirtmgmt bond0, then refresh capabilities on the webadmin
console and get to a situation where ovirtmgmt is configured only on top
of the VLAN device. Succeeding networking operations on the host should
then work as expected...

On 31/03/15 14:03, Bojan Popovic wrote:
 Of course.
 Here it is:
 
 net
 
 As you can see on the lower part of the screenshot, ovirtmgmt is on top
 of the bond0.231 interface and on top of bond0 also.
 I would like to remove bond0 from the bridge, cause it blocks every
 other operation using this dialog, whatever I try to change I'm only
 able to cancel it because I am confronted with the following:
 
 problem
 
 Thanks for the help.
 
 
 On 31.03.2015. 12:52, Lior Vernia wrote:
 Hello Bojan,

 I'm still having difficulties understanding the exact situation. Could
 you please click the Refresh Capabilities button in the hosts tab when
 the relevant host is selected and supply a screenshot of the Setup Host
 Networks dialog on that host afterwards. Then explain what about that
 situation you'd like to change.

 Yours, Lior.

 On 31/03/15 12:12, Bojan Popovic wrote:
 I have a hosted engine. It is on the same VLAN as the hosts are, so I am
 not having connectivity issues. I am not going to alter that part of the
 setup but I do need to add more networks, and I can not because I can
 not save the configuration, no matter what I change it is not saved.

 Ovirtmgmt is vlan-tagged.

 Is there some config file that can be edited manually, or maybe it can
 be done in the database?

 On 30.03.2015. 13:32, Dan Kenigsberg wrote:
 On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote:
 Hello, I am having a strange issue in creating ovirtmgmt bridge over
 vlan interface.

 I have set-up a bond from physical interfaces. On top of a bond there
 are three VLANs one of which is in ovirtmgmt bridge. I have set it up
 manually according to http://www.ovirt.org/Bonding_VLAN_Bridge

 Somehow the bond itself is also added to bridge in oVirt web interface,
 after reboot there also were two added lines to configuration of that 
 bond:
 # Generated by VDSM version 4.16.10-8.gitc937927.el7
 BRIDGE=ovirtmgmt

 No matter how I try to remove the bond from the bridge it doesn't
 succeed. If I edit the config files manually it isn't replicated to web
 interface. If I try to detach it from web interface, I can only attach
 bridge back to the bond interface. Of course configuration cannot be
 saved until the bridge is attached to an interface.

 I have tried putting the host in maintenance mode, shutting down the
 hosted engine and doing all the changes live.

 Anyone has a suggestion how to resolve this?
 I'd first like to understand how you intend for management traffic to
 travel from your Engine to the host. Do you have a vlan connection
 between the two? What is the host's IP address on that vlan?

 Since you have connectivity to the host, we can tell that you have
 un-tagged traffic to the host. In most (sane) cases, the IP address on
 the untagged network is different from the vlan'ed one. To use the
 latter, you'd need to remove the host from the cluster, and add it back
 with its second address.

 Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to
 have a special hack for this host?

 Regards,
 Dan.
 ___
 Users mailing list
 Users@ovirt.org
 http://lists.ovirt.org/mailman/listinfo/users

 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt management network

2015-03-31 Thread Bojan Popovic
I have a hosted engine. It is on the same VLAN as the hosts are, so I am
not having connectivity issues. I am not going to alter that part of the
setup but I do need to add more networks, and I can not because I can
not save the configuration, no matter what I change it is not saved.

Ovirtmgmt is vlan-tagged.

Is there some config file that can be edited manually, or maybe it can
be done in the database?

On 30.03.2015. 13:32, Dan Kenigsberg wrote:
 On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote:
 Hello, I am having a strange issue in creating ovirtmgmt bridge over
 vlan interface.

 I have set-up a bond from physical interfaces. On top of a bond there
 are three VLANs one of which is in ovirtmgmt bridge. I have set it up
 manually according to http://www.ovirt.org/Bonding_VLAN_Bridge

 Somehow the bond itself is also added to bridge in oVirt web interface,
 after reboot there also were two added lines to configuration of that bond:
 # Generated by VDSM version 4.16.10-8.gitc937927.el7
 BRIDGE=ovirtmgmt

 No matter how I try to remove the bond from the bridge it doesn't
 succeed. If I edit the config files manually it isn't replicated to web
 interface. If I try to detach it from web interface, I can only attach
 bridge back to the bond interface. Of course configuration cannot be
 saved until the bridge is attached to an interface.

 I have tried putting the host in maintenance mode, shutting down the
 hosted engine and doing all the changes live.

 Anyone has a suggestion how to resolve this?
 I'd first like to understand how you intend for management traffic to
 travel from your Engine to the host. Do you have a vlan connection
 between the two? What is the host's IP address on that vlan?

 Since you have connectivity to the host, we can tell that you have
 un-tagged traffic to the host. In most (sane) cases, the IP address on
 the untagged network is different from the vlan'ed one. To use the
 latter, you'd need to remove the host from the cluster, and add it back
 with its second address.

 Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to
 have a special hack for this host?

 Regards,
 Dan.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt management network

2015-03-30 Thread Dan Kenigsberg
On Mon, Mar 30, 2015 at 12:15:09PM +0200, Bojan Popovic wrote:
 Hello, I am having a strange issue in creating ovirtmgmt bridge over
 vlan interface.
 
 I have set-up a bond from physical interfaces. On top of a bond there
 are three VLANs one of which is in ovirtmgmt bridge. I have set it up
 manually according to http://www.ovirt.org/Bonding_VLAN_Bridge
 
 Somehow the bond itself is also added to bridge in oVirt web interface,
 after reboot there also were two added lines to configuration of that bond:
 # Generated by VDSM version 4.16.10-8.gitc937927.el7
 BRIDGE=ovirtmgmt
 
 No matter how I try to remove the bond from the bridge it doesn't
 succeed. If I edit the config files manually it isn't replicated to web
 interface. If I try to detach it from web interface, I can only attach
 bridge back to the bond interface. Of course configuration cannot be
 saved until the bridge is attached to an interface.
 
 I have tried putting the host in maintenance mode, shutting down the
 hosted engine and doing all the changes live.
 
 Anyone has a suggestion how to resolve this?

I'd first like to understand how you intend for management traffic to
travel from your Engine to the host. Do you have a vlan connection
between the two? What is the host's IP address on that vlan?

Since you have connectivity to the host, we can tell that you have
un-tagged traffic to the host. In most (sane) cases, the IP address on
the untagged network is different from the vlan'ed one. To use the
latter, you'd need to remove the host from the cluster, and add it back
with its second address.

Did you define ovirtmgmt as a vlan-tagged network? Or do you intend to
have a special hack for this host?

Regards,
Dan.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


Re: [ovirt-users] oVirt management network

2015-03-30 Thread René Koch













Hi Bojan,
















Did you configure a VLAN tag für your ovirtmgmt interface?







You have to do this in „Data Centers“ – select dc – „Logical Networks“.







Afterwards you should be able to configure network from oVirt webadmin 
interface again.







Don’t have a test setup with VLAN tags for ovirtmgmt atm, but did this multiple 
times before…


















Regards,







René




























Von:


 users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 
Im Auftrag von 
Bojan Popovic


Gesendet:
 Montag, 30. März 2015 12:15


An:
 users@ovirt.org


Betreff:
 [ovirt-users] oVirt management network

















Hello, I am having a strange issue in creating ovirtmgmt bridge over vlan 
interface.



I have set-up a bond from physical interfaces. On top of a bond there are three 
VLANs one of which is in ovirtmgmt bridge. I have set it up manually according 
to 
http://www.ovirt.org/Bonding_VLAN_Bridge




Somehow the bond itself is also added to bridge in oVirt web interface, after 
reboot there also were two added lines to configuration of that bond:

# Generated by VDSM version 4.16.10-8.gitc937927.el7

BRIDGE=ovirtmgmt



No matter how I try to remove the bond from the bridge it doesn't succeed. If I 
edit the config files manually it isn't replicated to web interface. If I try 
to detach it from web interface, I can only attach bridge back to the bond 
interface. Of course configuration cannot be saved until the bridge is attached 
to an interface.



I have tried putting the host in maintenance mode, shutting down the hosted 
engine and doing all the changes live.



Anyone has a suggestion how to resolve this?



Thanks.

































___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users