Re: [vchkpw] Upgrading Vpopmail to 5.2.1 and Auth Now Fails
G'Day Alex, > 1) > I had to 'chown root.root /home/vpopmail/bin/vchkpw'. Will check this. > 2) Also, try this: > > make the 'authmodulelist=' line in > /usr/local/sqwebmail/authdaemonrc look like: > authmodulelist="authvchkpw" > > Because I think sqwebmail gets confused if authvchkpw is not first in the > list, as earlier entries take precedence for authorization, and any othe > authmodules you may have compiled may be complicating the situation. See > next suggestion. Not even worrying about sqwebmail at the moment. Normal popping in doesn't work, so i didn't even get that far as to test the sqwebmail part.. > 3) > > /usr/local/src/vpopmail-5.2.1# ./configure --help |grep sqwebmail : > " --enable-sqwebmail-pass=y|n Turn on support for sqwebmail passwords (y) > or off (n) default is no. For sqwebmail-3.0 and above use default no" > Hmm? > > Try to explicitly set all configure options, especially auth options for > both sqwebmail and vpopmail: Again not even worried about the sqwebmail part yet.. > /usr/local/src/vpopmail-5.2.1# ./configure --help > /usr/local/src/sqwebmail-3.4.0.20021223# ./configure --help > > like for sqwebmail: > ./configure --with-(only module you need probably > authvchkpw) --without-(everything you dont need) > and etc for vpopmail. > > These suggestions may help. Please let me know if they do. > > [EMAIL PROTECTED] Regards Nathan > > - Original Message ----- > >From: "Nathan Chan" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Monday, December 30, 2002 4:57 PM > >Subject: [vchkpw] Upgrading Vpopmail to 5.2.1 and Auth Now Fails > > > > >G'Day All, > > > >I have had a stable and working qmail + vpopmail + qmailadmin + > >sqwebmail system running for some 2 years now except for one > >little prob under sqwebmail for quota's. Upon reading some info i > >believe this quirk is now gone under sqwebmail in the new versions > >but to do that upgrade of course i need to upgrade vpopmail, which > >was fine, except that the new version won't auth anyone with the > >new vchkpw... > > > >Info for system below : > >Qmail 1.03 (of course) > >vpopmail-3.4.11-1 > > > >my configure line for the new vpopmail (5.2.1) is : > >./configure --enable-ip-alias-domains=y --enable-logging=e --enable- > >vpopuser=vpopmail --enable-md5-passwords=y --enable- > >defaultquota=20M --enable-clear-passwd=n > > > >(i have tried with enable-clear-passwd=y but no difference.) > > > >I run Qmail under tcpserver as follows : > >tcpserver -R -H 0 pop3 /var/qmail/bin/qmail-popup > >domainxyz.com.au /home/vpopmail/bin/vchkpw /var/qmail/bin/qmail- > >pop3d Maildir& > > > >The domains all have their vpasswd/vpasswd.cdb files, but for some > >reason when i update the vchkpw it fails to auth. As soon as i > >revert no probs. > > > >Any help would be greatly appreciated. > > > >Thanks > >Nathan > > > > > >Out the 100TX, through the switch, down the cable modem, over the fiber > >optics, off the bridge, past the head end office nothing but 'Net. > > > > > > > > > > >
Re: [vchkpw] Upgrading Vpopmail to 5.2.1 and Auth Now Fails
Hello, I recently setup a vpopmail + qmail + sqwebmail box. NOTE: I may be confusing some of the following suggestions with courier-imap install issues I had. Sorry if im off here. 1) I had to 'chown root.root /home/vpopmail/bin/vchkpw'. 2) Also, try this: make the 'authmodulelist=' line in /usr/local/sqwebmail/authdaemonrc look like: authmodulelist="authvchkpw" Because I think sqwebmail gets confused if authvchkpw is not first in the list, as earlier entries take precedence for authorization, and any othe authmodules you may have compiled may be complicating the situation. See next suggestion. 3) /usr/local/src/vpopmail-5.2.1# ./configure --help |grep sqwebmail : " --enable-sqwebmail-pass=y|n Turn on support for sqwebmail passwords (y) or off (n) default is no. For sqwebmail-3.0 and above use default no" Hmm? Try to explicitly set all configure options, especially auth options for both sqwebmail and vpopmail: /usr/local/src/vpopmail-5.2.1# ./configure --help /usr/local/src/sqwebmail-3.4.0.20021223# ./configure --help like for sqwebmail: ./configure --with-(only module you need probably authvchkpw) --without-(everything you dont need) and etc for vpopmail. These suggestions may help. Please let me know if they do. [EMAIL PROTECTED] - Original Message - >From: "Nathan Chan" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Monday, December 30, 2002 4:57 PM >Subject: [vchkpw] Upgrading Vpopmail to 5.2.1 and Auth Now Fails > >G'Day All, > >I have had a stable and working qmail + vpopmail + qmailadmin + >sqwebmail system running for some 2 years now except for one >little prob under sqwebmail for quota's. Upon reading some info i >believe this quirk is now gone under sqwebmail in the new versions >but to do that upgrade of course i need to upgrade vpopmail, which >was fine, except that the new version won't auth anyone with the >new vchkpw... > >Info for system below : >Qmail 1.03 (of course) >vpopmail-3.4.11-1 > >my configure line for the new vpopmail (5.2.1) is : >./configure --enable-ip-alias-domains=y --enable-logging=e --enable- >vpopuser=vpopmail --enable-md5-passwords=y --enable- >defaultquota=20M --enable-clear-passwd=n > >(i have tried with enable-clear-passwd=y but no difference.) > >I run Qmail under tcpserver as follows : >tcpserver -R -H 0 pop3 /var/qmail/bin/qmail-popup >domainxyz.com.au /home/vpopmail/bin/vchkpw /var/qmail/bin/qmail- >pop3d Maildir& > >The domains all have their vpasswd/vpasswd.cdb files, but for some >reason when i update the vchkpw it fails to auth. As soon as i >revert no probs. > >Any help would be greatly appreciated. > >Thanks >Nathan > > >Out the 100TX, through the switch, down the cable modem, over the fiber >optics, off the bridge, past the head end office nothing but 'Net.
[vchkpw] Upgrading Vpopmail to 5.2.1 and Auth Now Fails
G'Day All, I have had a stable and working qmail + vpopmail + qmailadmin + sqwebmail system running for some 2 years now except for one little prob under sqwebmail for quota's. Upon reading some info i believe this quirk is now gone under sqwebmail in the new versions but to do that upgrade of course i need to upgrade vpopmail, which was fine, except that the new version won't auth anyone with the new vchkpw... Info for system below : Qmail 1.03 (of course) vpopmail-3.4.11-1 my configure line for the new vpopmail (5.2.1) is : ./configure --enable-ip-alias-domains=y --enable-logging=e --enable- vpopuser=vpopmail --enable-md5-passwords=y --enable- defaultquota=20M --enable-clear-passwd=n (i have tried with enable-clear-passwd=y but no difference.) I run Qmail under tcpserver as follows : tcpserver -R -H 0 pop3 /var/qmail/bin/qmail-popup domainxyz.com.au /home/vpopmail/bin/vchkpw /var/qmail/bin/qmail- pop3d Maildir& The domains all have their vpasswd/vpasswd.cdb files, but for some reason when i update the vchkpw it fails to auth. As soon as i revert no probs. Any help would be greatly appreciated. Thanks Nathan Out the 100TX, through the switch, down the cable modem, over the fiber optics, off the bridge, past the head end office nothing but 'Net.