or does it parse diseqc.conf?
Message: 1
Date: Mon, 21 Mar 2011 23:15:11 +
From: Morfstamorf...@gmail.com
Subject: Re: [vdr] rotor-ng in development [was [ANNOUNCE]
vdr-actuator-1.2.0 plugin]
To: VDR Mailing Listvdr@linuxtv.org
Message-ID:
aanlktimupe+jotg9j9v3pn5qg4iojvg9_v8-m0zes
On Tue, Mar 22, 2011 at 12:05 PM, Arturo Martinez marti...@embl.de wrote:
Excellent news!
I am sure the entire rotor vdr community will be very glad to hear that!
At the moment I use diseqc.conf with goto position commands for each sat
position to move the dish
With rotor-ng does diseqc use
On Tue, Mar 22, 2011 at 5:41 AM, Morfsta morf...@gmail.com wrote:
At the moment you need to manually edit the file to set the positions
up. A later version might include assigning or changing the position
numbers directly in the plugin interface.
I should at this point thank Luca Olivetti for
I get smoe of the terms confused. gotox is where you tell it the sat
postion such as 97w and it goes there as vs telling it to go to a stored
location? If that is the case, then gotox is needed as a way to get the
rotor to a location.
Also, VDR Diseqc should be on to use rotor as well as
maybe once it's cleaned up and fully functional, in can be intigrated
with vdr.
On 3/22/2011 8:49 AM, VDR User wrote:
On Tue, Mar 22, 2011 at 5:41 AM, Morfstamorf...@gmail.com wrote:
At the moment you need to manually edit the file to set the positions
up. A later version might include
On Sun, Mar 20, 2011 at 10:08 PM, Timothy D. Lenz tl...@vorgon.com wrote:
I only have a Nexus-s for sat card and right now my rotor alignment is all
screwed up. Relays went bad and had to replace them. I left the rotor
elevation setting untouched but now it over shoots more and more the farther
On Mon, Oct 11, 2010 at 1:32 PM, Morfsta morf...@gmail.com wrote:
This really is sorely missing from VDR. Its a nice project which I
might look at if I ever get a spare moment! First I would have to
update my VDR from 1.7.0 with multiproto as lack of good support for
vdr-rotor has been
Al 20/03/11 22:20, En/na Morfsta ha escrit:
I'd like to release it at some point when I've tidied it up (perhaps
as rotor-ng or something), but one issue I have is with DVB-S2 signal
tuning and scanning on my Hauppauge Nova HD-S2 card - does anyone have
this functionality working either with
I only have a Nexus-s for sat card and right now my rotor alignment is
all screwed up. Relays went bad and had to replace them. I left the
rotor elevation setting untouched but now it over shoots more and more
the farther it goes as if the elevation is wrong. Haven't had time to
look into it.
