Re: [vdr] Does anybody convert .TS to something else from VDR's commands menu?
Yes. I use yacoto 0.3.0 http://www.muresan.de/vdr/yacoto/ on vdr 1.7.15 Il 21/10/2010 16:34, Arturo Martinez ha scritto: Does anybody convert vdr .TS recordings to something else from VDR's commands menu? (on demand, on specific recordings only) ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Status of WinTV-HVR-4000 card!!
Il 26/05/2009 15:13, Ales Jurik ha scritto: On Tuesday 26 of May 2009, Fabio Bordin wrote: Il 25/05/2009 20:19, Goga777 ha scritto: I have this card and recently I reinstall my system. The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver. My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels. Maybe I missed something, I'm investigating. Beside, with my older system I never used dvb-t tuner in vdr. I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t. I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update. I have no problem with hvr4000 and dvb-s2/s channels I'm using the Igor Liplianin's hg repo and I am not using dvb-t. Goga Last night I understood why I was not able to use the card with VDR: I'm using a 64-bit. I tried the same firmware and drivers in a 32-bit os and everything worked correctly. No problem here - working for more than one year at 64bit Debian (Sid-Lenny- Squeeze). I finally find out what was wrong with my system: extension patch 77 for vdr 1.7.0 put ko my hwr4000. With this patch applied (vdr-1.7.0-ext_h264-s2ng-speedup.diff) to a vanilla 1.7.0 source hwr4000 won't work. On same system, vdr 1.6.0 and 1.7.7 work well. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Status of WinTV-HVR-4000 card!!
Il 25/05/2009 20:19, Goga777 ha scritto: I have this card and recently I reinstall my system. The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver. My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels. Maybe I missed something, I'm investigating. Beside, with my older system I never used dvb-t tuner in vdr. I have no problem with this card and dvb-s2 drivers from Igor Liplianin's hg together with vdr-1.7.7. I'm not using dvb-t. I have installed s2-liplianin-2866ecb5e66b.tar.bz2 from http://mercurial.intuxication.org/hg/s2-liplianin/ - it is not current tip, but no need to update. I have no problem with hvr4000 and dvb-s2/s channels I'm using the Igor Liplianin's hg repo and I am not using dvb-t. Goga Last night I understood why I was not able to use the card with VDR: I'm using a 64-bit. I tried the same firmware and drivers in a 32-bit os and everything worked correctly. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Status of WinTV-HVR-4000 card!!
I have this card and recently I reinstall my system. The card is recognized from kernel 2.6.28 so you don't need to patch dvb driver. My vdr, with recent s2api dvb driver, don't use this card. Vdr find the card but can't tune any channel. Femon plugin show me always 0% signal while kaffeine can tune channels. Maybe I missed something, I'm investigating. Beside, with my older system I never used dvb-t tuner in vdr. If you want to use this card for both sat and dvb with vdr, I suggest you to buy 2 different card, one sat(-S2) and one dvb-t or one sat-card and one usb-stick for dvb-t. PS: I hope someone misleading me so I might be able to use the full functionality of this card. Il 25/05/2009 11:53, lucian orasanu ha scritto: Hello, I want to buy this card, but before I wnat to know if this card works fine under linux and with vdr. Can some one tell me if is using this card and is ok? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] What is the best linux distribution for VDR?
Last week arrived to me new hard disk I ordered so I reinstalled my os. My goal is to have a updated linux system which let me see vdr throw xineliboutput or xine. I have a Skystar 1 and a Hauppauge HVR4000. I did many tests without any success: - Debian Sid 64(problem with alsa and remote) - Archlinux 64 (problem with remote and no image throw xineliboutput) - Sidux 32(problem with remote and no image throw xineliboutput) I tried vdr version 1.7.0 and 1.7.7 with s2api driver. I think my main problem is evdev and xorg: evdev let every device under /dev/input/event* input in X: this mean that remote controlled by HVR4000's ir can input directly to X. Someone knows how to tell evdev to skip a particular /dev/input/event* ? or how to disable evdev? ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] What is the best linux distribution for VDR?
Il 22/05/2009 09:32, Torgeir Veimo ha scritto: 2009/5/22 Fabio Bordinfabio.bordin...@gmail.com: Someone knows how to tell evdev to skip a particular /dev/input/event* ? or how to disable evdev? Configure vdr to not use keyboard input. Instead use the remote plugin which can be configured with a specific input device. My problem is that vdr and remote plugin wont configure at statup. I explain better: Fresh install, I copy *.conf file from vdr source dir to video dir. There is no remote.conf file. I start vdr from vdr-source dir with this comman: ./vdr -Pxinelibpouput -p -Premote -i /dev/input/eventX where eventX is the device i want to use to control my remote. Vdr start but let me see only a black screen with no signal No remote.conf created. If I copy the remote.conf from xineliboutput's wiki, vdr let me use keyboard if I start without remote plugin. If I start with remote plugin vdr let me see only no-signal. Last night even without remote plugin, vdr did not want to let me see tv. In general, there's no perfect distro for bleeding edge vdr at the moment, you'll need to compile most stuff. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] What is the best linux distribution for VDR?
Ok but if remote.conf don't exist or is empty it should start the learn process. My vdr with empty remote.conf or inexistent remote.conf DON'T start the learn process. Something I missed to tell: every vdr is patched with zulu's extension patch. Il 22/05/2009 10:03, Theunis Potgieter ha scritto: check out the remote.conf file and see if the device is already configured. If it is already configured, will not ask to learn them again. On 22/05/2009, *Fabio Bordin* fabio.bordin...@gmail.com mailto:fabio.bordin...@gmail.com wrote: Il 22/05/2009 09:32, Torgeir Veimo ha scritto: 2009/5/22 Fabio Bordinfabio.bordin...@gmail.com mailto:fabio.bordin...@gmail.com: Someone knows how to tell evdev to skip a particular /dev/input/event* ? or how to disable evdev? Configure vdr to not use keyboard input. Instead use the remote plugin which can be configured with a specific input device. My problem is that vdr and remote plugin wont configure at statup. I explain better: Fresh install, I copy *.conf file from vdr source dir to video dir. There is no remote.conf file. I start vdr from vdr-source dir with this comman: ./vdr -Pxinelibpouput -p -Premote -i /dev/input/eventX where eventX is the device i want to use to control my remote. Vdr start but let me see only a black screen with no signal No remote.conf created. If I copy the remote.conf from xineliboutput's wiki, vdr let me use keyboard if I start without remote plugin. If I start with remote plugin vdr let me see only no-signal. Last night even without remote plugin, vdr did not want to let me see tv. In general, there's no perfect distro for bleeding edge vdr at the moment, you'll need to compile most stuff. ___ vdr mailing list vdr@linuxtv.org mailto:vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] HVR4000 and multifrontend
Hello, I need help to use dvb-t in vdr. Now I use s2api with multifrontend enabled compiled from http://linuxtv.org/hg/~stoth/s2-mfe (I also tried mfe patch against v4l version but i had same results) With Kaffeine 0.8.3 I can use both frontends, dvb-s and dvb-t. It can search channels and let me see dvb-t. Vdr (1.6.0 and 1.7.1 patched) do not let me use dvb-t channel I scanned. I also tried do double the adapter with these commands: mkdir /dev/dvb/adapter1 ln -s /dev/dvb/adapter0/frontend1 /dev/dvb/adapter1/frontend0 ln -s /dev/dvb/adapter0/net1 /dev/dvb/adapter1/net0 ln -s /dev/dvb/adapter0/dvr1 /dev/dvb/adapter1/dvr0 ln -s /dev/dvb/adapter0/demux1 /dev/dvb/adapter1/demux0 but vdr continues to ignore dvb-t channels while Kaffeine continues to work well. Someone knows what I have to do to (finally) see dvb-t channel with vdr? Tanks ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Black Screen with vdr 1.7.1
Hi, in these days I tried new version of vdr 1.7.1 with the lastest version of S2API. I have an ss2 and a HVR-4000 card in my system. I compiled and I installed correctly the lasted driver version (s2-mfe first, then i tried s2 tree) but when I start vdr 1.7.1, it remains in black screen even if I can see the osd. I applied every patch posted in this ml. I also tried vdr 1.7.0 patched and this version work. Why vdr 1.7.1 remain black while vdr 1.7.0 works? This is a summary of my system: Debian Etch Core 2 Duo E6750 Skystar 2 HVR-4000 vdr with softdevice and femon ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Black Screen with vdr 1.7.1
Mika Laitio ha scritto: Hi, in these days I tried new version of vdr 1.7.1 with the lastest version of S2API. I have an ss2 and a HVR-4000 card in my system. I compiled and I installed correctly the lasted driver version (s2-mfe first, then i tried s2 tree) but when I start vdr 1.7.1, it remains in black screen even if I can see the osd. I applied every patch posted in this ml. I also tried vdr 1.7.0 patched and this version work. Why vdr 1.7.1 remain black while vdr 1.7.0 works? With vdr-1.7.0 + S2, I have also been able to watch dvb-s channels (with hdr-4000) but not dvb-t (with hvr-1300). With vdr-1.7.1 both dvb-t and dvb-s channels fails also for me. dvt-t fails with all vdr version I tried (1.6.0 and v4l, 1.7.0 (s2 and multiproto) and 1.7.1) This is a summary of my system: Debian Etch Core 2 Duo E6750 Skystar 2 HVR-4000 vdr with softdevice and femon I have AMD X2-4850E and using 64 bit version of Linux. How about you, are you using 32 or 64 bit version? I use 32 bit version with kernel 2.6.26.5 Mika ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr