Oliver Schinagl writes:
> > I'm interested for such information. (I'm looking also for good well
> > supported DVB-S2 device to target multiple satellite)
> >
> > I've a question for you Olivier. I don't know that brand. Why going to 1
> > dualtuner board and the octopus. In the same brand y
Oliver Schinagl writes:
> On 11/26/12 22:39, Oliver Schinagl wrote:
> > On 11/26/12 21:28, Lars Hanisch wrote:
> >> Hi,
> >>
> >> Am 26.11.2012 21:24, schrieb Oliver Schinagl:
> >>> Why build it externally? I was quite certain that the ddbridge
> >>> drivers are in mainline for a while now?
Halim Sahin writes:
> Hi,
> On Mon, Nov 26, 2012 at 09:20:30PM +0100, Lars Hanisch wrote:
> > Hi,
> >
> > Am 26.11.2012 20:10, schrieb Halim Sahin:
> > > On Mon, Nov 26, 2012 at 06:20:56PM +0100, Lars Hanisch wrote:
> > >> My DVB-C/T card is working here for months with no problems. Second
Oliver Schinagl writes:
> On 27-11-12 10:33, Ralph Metzler wrote:
> > Oliver Schinagl writes:
> > > > I'm interested for such information. (I'm looking also for good well
> > supported DVB-S2 device to target multiple satellite)
> > > >
&
Oliver Schinagl writes:
> > The newer C/T modules use ST demods.
> > I think the DRX-K is also no longer being produced.
> I bought a Terratec dual T PCI-e which features two DRX-K demods. While
> not the newest card, it's reasonably new and driver support is < 6
More like > 6 year old card
Oliver Schinagl writes:
> > > What demod/tuner is being used on the DVB-S2 bit? Just to know the
> > state
> > > of support of the demod/tuner.
> >
> > stv0900/stv6110
> >
> > It uses the drivers stv090x and stv6110x which are also used by several
> > different cards from other manufac
Halim Sahin writes:
> > > Well this is not good news for users in germany because without a
> > > working cam, you can't watch much channels with dvb-c.
> > > Don't know but I can't understand, why cam
> > > handling must be done in userspace for these new cards.
> >
> > CI works fine wi
Timothy D. Lenz writes:
> I glanced at these boards because at one time I wanted to replace my old
> nexus card and I only want to use multi-tunner cards from now on. I
> could not afford any upgrades now though:(
>
> But one thing I noticed is, they only support 8PASK modulation and not
Michal Novotny writes:
> Why must they be on the same transponder? That was my original question
> in this thread and the answer was different.
>
> So even if I have CAM that can decrypt multiple channels, it cannot
> decrypt multiple channels from different tuners?
No, with most hardware
Sami Ketola writes:
> I think you should be able to decrypt with that configuration. I have my
> card+CAM connected to CI on my Technotrend FF DVB-C card and that decrypts
> channels received by other DVB-C cards. Only li
The old Technotrend FF DVB-C card?
Like http://linuxtv.org/wiki/inde
Sami Ketola writes:
> On May 22, 2014, at 7:47 PM, Ralph Metzler wrote:
>
> > Sami Ketola writes:
> >> I think you should be able to decrypt with that configuration. I have my
> >> card+CAM connected to CI on my Technotrend FF DVB-C card and that
> >&
Hi,
Luca Olivetti writes:
> El 12/08/15 a les 09:28, jori.hamalai...@teliasonera.com ha escrit:
>
> > I abandoned VDR after 11 years of running it for Duo2+OpenVix.
>
> Sorry for the off-topic, but my google-fu is failing: where could I find
> instructions on how to build openvix from sou
12 matches
Mail list logo
