Re: [vdr] Two VDR's on one machine
As far as I can see I get the needed modules loaded (stb6100, stb0899, lnbp21 saa7416, budget-ci) When I try make unload and make load it loads 204 modules and I get no image at all anymore in vdr, nor on the nexus-s nor on the s2-3200. I think because s2-3200 comes as adapter0 and nexus as adapter1 When I rmmod all modules and just modprobe dvb-ttpci and stv0299, it works normally. When I modprobe stb6100, stb0899 and budget-ci, I can see an image on the nexus for a few minutes and then I read in the logs now tuned to ... and I get a black screen. Thanks for your assistance serge -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Reinhard Nissl Verzonden: donderdag 10 januari 2008 22:44 Aan: VDR Mailing List Onderwerp: Re: [vdr] Two VDR's on one machine Hi, serge pecher schrieb: Could you have a look at http://dvbkivabien2.info/viewtopic.php?f=7t=12943p=121435#p121435 where a gave more explanation about my problem. Its seems that the tuner of the S2-3200 is not detected, but I don't know what to do. Well, I don't understand French. Try this: cd /path/to/multiproto/tree make unload make load Check the output of dmesg now or have a look at /var/log/messages (other distributions my use a different file). Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
I have the same problem with 1x dvb-s and 1x dvb-s2. In the mean time I intend to buy a second dvb-S instead of the dvb-S2, but of course I am interested in a solution to have s ans s2 working together Serge -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Magnus Hörlin Verzonden: woensdag 9 januari 2008 19:58 Aan: VDR Mailing List Onderwerp: [vdr] Two VDR's on one machine I can't get Reinhard's h.264/dvb-s2 patches and multiproto to work when running both dvb-s2 and dvb-t at the same time. Dvb-t works if I don't load the dvb-s modules and dvb-s(2) works if I don't load the dvb-t modules but it doesn't work with both. Instead I'm currently running my dvb-t vdr on my server as usual and another vdr with dvb-s2 on one of my diskless clients. However, recording hd channels over nfs and simulaneously streaming it to my other diskless client overloads my network. Therefore I'm interested to know how hard it would be to modify vdr so I can run one vdr process with, say /dev/dvb/adapter0-3 and a second one on adapter4? Where do I start looking? Is it doable? I tried running a virtual Ubuntu on my Mandriva server and used dvb-t usb sticks on the ubuntu but usb in vmware wasn't stable enough, at least on my attempts. /Magnus H ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
On Thu, Jan 10, 2008 at 12:18:16PM +0100, serge pecher wrote: I have the same problem with 1x dvb-s and 1x dvb-s2. In the mean time I intend to buy a second dvb-S instead of the dvb-S2, but of course I am interested in a solution to have s ans s2 working together ??? I use VDR with two DVB-S and one DVB-S2 here without problem... -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
Thanks for the info. Could you have a look at http://dvbkivabien2.info/viewtopic.php?f=7t=12943p=121435#p121435 where a gave more explanation about my problem. Its seems that the tuner of the S2-3200 is not detected, but I dont know what to do. Thanks, Serge -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Gregoire Favre Verzonden: donderdag 10 januari 2008 12:39 Aan: VDR Mailing List Onderwerp: Re: [vdr] Two VDR's on one machine On Thu, Jan 10, 2008 at 12:18:16PM +0100, serge pecher wrote: I have the same problem with 1x dvb-s and 1x dvb-s2. In the mean time I intend to buy a second dvb-S instead of the dvb-S2, but of course I am interested in a solution to have s ans s2 working together ??? I use VDR with two DVB-S and one DVB-S2 here without problem... -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
On Thu, Jan 10, 2008 at 02:29:58PM +0100, serge pecher wrote: Thanks for the info. Could you have a look at http://dvbkivabien2.info/viewtopic.php?f=7t=12943p=121435#p121435 where a gave more explanation about my problem. Its seems that the tuner of the S2-3200 is not detected, but I dont know what to do. Well, it don't seems you have a guest access to read it ? I don't have a S2-3200, but I think the first revision has a problem (that was the main reason not to buy one) the best place to seek for information is vdrportal.de in which there are a few topics about this card. But honestly, if you did a ./scripts/rmmod.pl load from the v4l dir of the http://jusst.de/hg/multiproto it should work out of the box :-) I use this small script in order to update/compil it (p=4000.diff is just a patch to enable support for my card which for an unknow reason isn't included sofar in multiproto). By the way, I have no idea if your card need a firmware or not... mine even if it's a budget one need one. Good luck, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre #!/bin/bash p=4000.diff MAKE='nice -n 4 make -j3' OPTIONS=show update dry-run apply undry-run unapply compile install log exit select opt in $OPTIONS; do if [ $opt = show ]; then vi $p elif [ $opt = update ]; then hg pull -u http://jusst.de/hg/multiproto elif [ $opt = dry-run ]; then patch --dry-run -p1 $p elif [ $opt = apply ]; then patch -p1 $p elif [ $opt = undry-run ]; then patch --dry-run -p1 -R $p elif [ $opt = unapply ]; then patch -p1 -R $p elif [ $opt = compile ]; then cd v4l $MAKE distclean \ $MAKE allmodconfig $MAKE elif [ $opt = install ]; then sudo $MAKE install cd .. elif [ $opt = log ]; then hg log|less elif [ $opt = exit ]; then exit else echo bad option fi done ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
Will try the script this evening Someone told me while looking at my logs on the dvbkivabien site, that the tuner of the S2-3200 was'tn detected. Do you know what I should see in lsmod if it was (what are I looking for ?). If a use a non dvbs2/h264 patched vdr, should the s2-3200 work in only dvb-s mode or am I obliged to use a patched vdr to have any result ? (just looking to have an image for the moment, not that interested in HD for the time being). Thanks, Serge -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Gregoire Favre Verzonden: donderdag 10 januari 2008 17:44 Aan: VDR Mailing List Onderwerp: Re: [vdr] Two VDR's on one machine On Thu, Jan 10, 2008 at 02:29:58PM +0100, serge pecher wrote: Thanks for the info. Could you have a look at http://dvbkivabien2.info/viewtopic.php?f=7t=12943p=121435#p121435 where a gave more explanation about my problem. Its seems that the tuner of the S2-3200 is not detected, but I dont know what to do. Well, it don't seems you have a guest access to read it ? I don't have a S2-3200, but I think the first revision has a problem (that was the main reason not to buy one) the best place to seek for information is vdrportal.de in which there are a few topics about this card. But honestly, if you did a ./scripts/rmmod.pl load from the v4l dir of the http://jusst.de/hg/multiproto it should work out of the box :-) I use this small script in order to update/compil it (p=4000.diff is just a patch to enable support for my card which for an unknow reason isn't included sofar in multiproto). By the way, I have no idea if your card need a firmware or not... mine even if it's a budget one need one. Good luck, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
Hi, serge pecher schrieb: Could you have a look at http://dvbkivabien2.info/viewtopic.php?f=7t=12943p=121435#p121435 where a gave more explanation about my problem. Its seems that the tuner of the S2-3200 is not detected, but I don’t know what to do. Well, I don't understand French. Try this: cd /path/to/multiproto/tree make unload make load Check the output of dmesg now or have a look at /var/log/messages (other distributions my use a different file). Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:[EMAIL PROTECTED] ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
On Thu, Jan 10, 2008 at 07:33:11PM +0100, serge pecher wrote: Hello, Will try the script this evening You could maybe first start it with unload option to be sure there aren't other modules loaded about DVB, also you have to be sure DVB wasn't compiled in the kernel. The simple script was only to update and compil the modules, use the scripts/rmmod.pl to load / unload the modules. Someone told me while looking at my logs on the dvbkivabien site, that the tuner of the S2-3200 was'tn detected. Do you know what I should see in lsmod if it was (what are I looking for ?). One could also simply use dmesg, like here : dmesg |grep DVB|grep regi which here gives me : DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI) DVB: registering frontend 0 (ST STV0299 DVB-S)... DVB: registering new adapter (cx88[0]) DVB: registering frontend 1 (Conexant CX24116/CX24118)... DVB: registering new adapter (cx88[1]) DVB: registering frontend 2 (Conexant CX24123/CX24109)... So my 3 cards are detected right. If a use a non dvbs2/h264 patched vdr, should the s2-3200 work in only dvb-s mode or am I obliged to use a patched vdr to have any result ? (just looking to have an image for the moment, not that interested in HD for the time being). If you use multiproto driver from just.de then you have to use a patched VDR (it's a guess as I didn't try it with an vanilla VDR). Good luck, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Two VDR's on one machine
I can't get Reinhard's h.264/dvb-s2 patches and multiproto to work when running both dvb-s2 and dvb-t at the same time. Dvb-t works if I don't load the dvb-s modules and dvb-s(2) works if I don't load the dvb-t modules but it doesn't work with both. Instead I'm currently running my dvb-t vdr on my server as usual and another vdr with dvb-s2 on one of my diskless clients. However, recording hd channels over nfs and simulaneously streaming it to my other diskless client overloads my network. Therefore I'm interested to know how hard it would be to modify vdr so I can run one vdr process with, say /dev/dvb/adapter0-3 and a second one on adapter4? Where do I start looking? Is it doable? I tried running a virtual Ubuntu on my Mandriva server and used dvb-t usb sticks on the ubuntu but usb in vmware wasn't stable enough, at least on my attempts. /Magnus H ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
On Wed, 2008-01-09 at 19:57 +0100, Magnus Hörlin wrote: other diskless client overloads my network. Therefore I'm interested to know how hard it would be to modify vdr so I can run one vdr process with, say /dev/dvb/adapter0-3 and a second one on adapter4? Where do I start looking? Is it doable? http://linux.die.net/man/8/vdr -D num, --device=num Use only the given DVB device (num = 0, 1, 2...). There may be several -D options (by default all DVB devices will be used). You could also use streamdev-client + server on each instance to allow them to share resources. Not ideal but the best there is currently. gdh ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Two VDR's on one machine
Gavin Hamill wrote: On Wed, 2008-01-09 at 19:57 +0100, Magnus Hörlin wrote: other diskless client overloads my network. Therefore I'm interested to know how hard it would be to modify vdr so I can run one vdr process with, say /dev/dvb/adapter0-3 and a second one on adapter4? Where do I start looking? Is it doable? http://linux.die.net/man/8/vdr -D num, --device=num Use only the given DVB device (num = 0, 1, 2...). There may be several -D options (by default all DVB devices will be used). You could also use streamdev-client + server on each instance to allow them to share resources. Not ideal but the best there is currently. gdh ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr Ooops. I'm really sorry. I've used vdr for years but forgot to RTFM. Thanks, /Magnus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
