I wrote:
> ULVAC quadrupole mass spectrometer: model YTP-50M.
> Built in precision meter, ULVAC, GCMT G-Tran ISG-1
>
> I do not know if this has the umph to measure helium.
>
Let me put that in more technical terms. I mean I do not know whether it
has enough resolution, power, moxie or
Axil Axil wrote:
> If the reactor stops producing heat at some later time, the fuel
> consumption rate can be calculated and this data might indicate what energy
> production mechanism is producing energy in the mesh reactor.
>
I have a feeling that might be caused by contamination rather than
https://www.amazon.com/dp/B07SS881QL/ref=sspa_dk_detail_9?psc=1_rd_i=B07SS881QL_rd_w=D6wfV_rd_p=8a8f3917-7900-4ce8-ad90-adf0d53c0985_rd_wg=arkyi_rd_r=EZSTH1RQ1D7YNPVH5M9Q_rd_r=e5d95cbe-a73a-11e9-90e7-f1525924e8b2=A1KXS0WP6SWWJO
-Original Message-
From: Frank Znidarsic
To: vortex-l
Here is a picture of the x5 vibrator. I estimate that the loops have a natural
frequency of about 10 mega hertz. That's what I would expect from my megahertz
meter relationship.
Can an understanding of cold fusion produce a better uhf antenna?
Frank Znidarsic
I am still working with antenna design. On the Yagi antenna the part of the
front was called the director. With newer UHF antennas the part on the front
is called a vibarator.
My work shows that the collapse of the wave function is associted with
vibration at a dimensional frequency of one
One possible way to shed some new light on the fusion issue is to run an
experiment were the pressure of deuterium is reduced slowly down toward the
1 pa limit to see how the rate of heat output behaves. Once a minimum
sustainable pressure is determined where the mesh reactor still produces
steady
Thanks.
In addition to the cold trap technique which Russ George mentioned and offered
to help with - there is this:
https://aip.scitation.org/doi/10.1063/1.1143286
“Separation of helium and deuterium peaks with a quadrupole mass spectrometer
by using the second stability zone in the Mathieu
JonesBeene wrote:
>
> Good point. Jed knows the details of the mass spec Mizuno had available,
> which was damaged in the earthquake. IIRC it was being repaired when the
> paper was written and its present status has not been reported. Perhaps he
> will comment on this.
>
ULVAC quadrupole
Good point. Jed knows the details of the mass spec Mizuno had available,
which was damaged in the earthquake. IIRC it was being repaired when the paper
was written and its present status has not been reported. Perhaps he will
comment on this.
Surely Mizuno was looking for helium before his
If one is working with a quadrapole mass spec, and especially a small one like
an RGA it will be impossible to devolve the peaks of 4He and D2. Only by being
certain that little D2 is present by trapping it in a cold or getter trap on
the way to the mass spec can one ever be certain that the
Dear Axil—
You note: “Simply put, in all cases, matter that enters the transmutation
process whether that matter is acted upon by any nuclear or sub nuclear process
including fusion, fission, alpha, beta, and gamma radiation, a newly
reconfigured stable resultant elemental product comes out.”
For 100kw/h about 1.2mg of deuterium are needed.
If pressure is lower then the relative density of D (D2 gas) increases,
somewhere between 0.15 & 0.45g/l.The inventory is given by Ni/pd surface
bound D, the volume (15l) of the reactor and the pressure factor (=0.003
for 300Pa) .
But Mizuno
Reality Check. Surprisingly, nuclear fusion of deuterium into helium seems NOT
sufficiently energetic to account for the Mizuno claim of heating his home.
Mass is apparently being converted into energy, but how? And what are the
ramifications of such a low reactor inventory of deuterium gas?
Axil:
SM people never could measure a strong force ( all forces are EM
forces..) and a unification with gravity of something inexistent - to
enable LENR - is nonsense (gravity is a very tiny residual EM force see
NPP 2.1.7) . Please stop producing childish noise by mixing everything
you
Mizuno has what is needed to measure 4He in his cold fusion reactions. He
merely needs to employ a good carbon cold trap to reduce the level of deuterium
in the gas aliquot going into his RGA. Without the cold trap the D2 signal will
swamp the 4He signal and it won’t be observable. With the
15 matches
Mail list logo