[Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Jojo Jaro
With all the floating theories on how Rossi Cold Fusion works, do we have a consensus on whether the Ni powder needs to be attached to the reactor walls? or free floating inside the reactor? There are very good reasons for either strategy. I have read all the comments on this collective on

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Axil Axil
The one big disadvantage of using the reactor walls is in replacing the embedded powder. When the powder is spent, the whole core must be discarded...not competitive. On the other hand, nano-powder may be too tiny to allow surface phonons to propagate correctly (however that might work). Nano

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Jojo Jaro
Sent: Thursday, February 02, 2012 2:52 AM Subject: Re: [Vo]:To Sinter or Not to Sinter The one big disadvantage of using the reactor walls is in replacing the embedded powder. When the powder is spent, the whole core must be discarded...not competitive. On the other hand, nano-powder may

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Guenter Wildgruber
Von: Jojo Jaro jth...@hotmail.com An: Vortex-l vortex-l@eskimo.com Gesendet: 19:17 Mittwoch, 1.Februar 2012 Betreff: [Vo]:To Sinter or Not to Sinter With all the floating theories on how Rossi Cold Fusion works, do we have a consensus

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Jojo Jaro
much right now. Jojo - Original Message - From: Guenter Wildgruber To: vortex-l@eskimo.com Sent: Thursday, February 02, 2012 3:31 AM Subject: Re: [Vo]:To Sinter or Not to Sinter -- Von

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Guenter Wildgruber
Von: Jojo Jaro jth...@hotmail.com An: Vortex-l vortex-l@eskimo.com Gesendet: 20:52 Mittwoch, 1.Februar 2012 Betreff: Re: [Vo]:To Sinter or Not to Sinter ...Before long, I have no doubts I will need a glove box, and industrial microwave, some custom RF

RE: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Jones Beene
I agree with Günter here, with one proviso. If you very clever to start out with, do your homework perfectly, take adequate precautions and have lots of Lab experience - then you might get lucky even on a low budget, if everything were to go perfectly. In retrospect, once all is known, this

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Axil Axil
I am sorely tempted to give experimental advice even though I have no right to. So let me succumb. I would not do this stuff myself out of fear of bodily harm. In the beginning of your experimentation, I would keep it as simple as possible. IMHO, the excess heat detection route is not the

RE: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Jojo Jaro
Jones, while I feel the task to replicate Rossi would be very difficult, I do not believe it is impossible. Rossi was able to get lucky so I feel my chances are good given the quality of the people in this collective. And given that we have already narrrowed down many of the factors, like

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Jojo Jaro
Axil, Please, by all means keep the speculations and the emabarassing experimental advice coming. I have learned a lot from you and many other people here. Vortex has been the most useful forum as far as gaining insight into replicating Rossi. Yes, I have a gieger counter that will detect

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Axil Axil
See http://www.youtube.com/watch?v=RVj69R66Agg This cloud chamber build seems the most convergent to me. You don’t need to pick up any dry ice here. When in YouTub, search on “cloud chamber” There are many how to do it videos on this subject. The following paper contains a picture of a proton

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Chemical Engineer
Jojo, I agree. There is a certain amount of risk in just getting out of bed in the morning On Wednesday, February 1, 2012, Jojo Jaro jth...@hotmail.com wrote: Axil, Please, by all means keep the speculations and the emabarassing experimental advice coming. I have learned a lot from you and

RE: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Peter B
or bordom is a close secound . I would hate to get to 90 yrs old and be full of If only we had tried Play safe and as Spock would say Live long and Prosper Pete Date: Wed, 1 Feb 2012 17:32:36 -0500 Subject: Re: [Vo]:To Sinter or Not to Sinter From: cheme...@gmail.com To: vortex-l@eskimo.com

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Terry Blanton
On Wed, Feb 1, 2012 at 6:43 PM, Peter B ddc...@hotmail.com wrote: Managed Danger Agreed There a great Saying    in a movie  Shawshank Redemption  that I love . It had 2 main actors , Morgan Freedman and the other ..( I forget) Anyway it  was .Get busy living or get

RE: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Peter B
Terry Tim Robbins ...That's him ...always helps me decide what I'm going to do when I think Im down for the count Decide to . fight or surrender Some things take years but its worth it Pete Date: Wed, 1 Feb 2012 19:09:36 -0500 Subject: Re: [Vo]:To Sinter

Re: [Vo]:To Sinter or Not to Sinter

2012-02-01 Thread Terry Blanton
On Wed, Feb 1, 2012 at 10:14 PM, Peter B ddc...@hotmail.com wrote: Terry Tim Robbins ...That's him ...always helps me decide what I'm going to do when I think Im down for the count Decide to . fight or surrender http://www.youtube.com/watch?v=mTv1Dmu5CYcfeature=fvst T