Might try again. Seems to be working fine now.
On Tue, Jan 22, 2013 at 9:11 PM, Jones Beene jone...@pacbell.net wrote:
I get an error message from that page
** **
** **
** **
*From:* Jack Cole
** **
I've been conducting a new series of electrolysis experiments with
Jack,
Nitinol is a interesting choice since both nickel and titanium are proton
conductors with a history of positive results in LENR - and the wire is
commonly available. Plus there is the strange memory effect (which could
be utilized for audible resonance).
It appears from your other pages
Jones,
I'm still working the kinks out of the experimental procedures. At first
glance, the behavior doesn't appear to be different than the nickel and
tungsten.
What I am working on now is a three electrode system. One is made out of
nitinol, and I'm using this as a heating element only.
I was not surprised about the article on nano silicon releasing
hundreds of times more hydrogen from water, but it makes me wonder if there is
an inexpensive method to make nano geometry from these other LENR candidates
like Nitol. We know that nano powders can be pyrophoric
Jack,
If anomalous cooling in Nitinol (putative) is of any interest - here is
about the simplest experiment which can tell an experimenter something worth
knowing. I've not done it, but it is now on my list.
It would be to compare the relative temperature rise using simple resistance
Courtesy of http://lenrnews.eu --
The Svedberg Laboratory of Uppsala U. in Sweden recently published -
THE NATURE OF THE CHEMONUCLEAR TRANSITION - Hidetsugu Ikegami
http://www.tsl.uu.se/digitalAssets/142/142245_tsl-note-2012-61.pdf
- in which the author proposes that in some environments
Excellent find Lou!! Much appreciate it!
The abstract for just one section of the book sounds extremely interesting
and encouraging:
Our decadal basic research confirmed: Chemonuclear fusion of light nuclei
in the metallic Li-liquids hold the common mechanism with pycnonuclear
reactions in the
A proposal from a nuclear amateur.
If LENR is fusion this
experiment may consume 11B and makes 4He.
But if LENR involves free
neutrons there would be a different reaction.
10B+n → 7Li+4He+gamma +
2.31 MeV
The 10B isotope is good at capturing neutrons. It would be
fine to looking for
This paper and many others like it describe how HOT fusion is enhanced
when it occurs in a chemical lattice. This study has no relationship
to cold fusion because the same nuclear products are not formed.
While the lattice enhances the hot fusion rate, it does so only at
very low energy
Thanks for the input, Ed
I am agnostic on the underlying physics, but am interested in whether
this approach make any type of fusion viable.
If you have the time, or interest, in some of this author's patent
applications, here are a few:
Method of and apparatus for generating recoilless
Thanks Ed, but throughout the papers it refers to temperatures of 773K
(500C), and 460C. are not the temps for 'hot' fusion in the 10s of thousands
of degs and higher??? Can U explain please.
There is also this statement which seems to indicate that a specific
temperature will optimize the
Hi,
On 15-1-2013 22:06, P.J van Noorden wrote:
Hi Robbie,
I registered late in the afternoon and got a welcome mail.
It will be interesting to attend the colloquium..Are you also living
in the Netherlands like me?
Peter
Just wondering if any (interesting) news is to be reported?
Kind
On Jan 23, 2013, at 2:56 PM, MarkI-ZeroPoint wrote:
Thanks Ed, but throughout the papers it refers to temperatures of
773K (500C), and 460C… are not the temps for ‘hot’ fusion in the 10s
of thousands of degs and higher??? Can U explain please…
Mark, the studies are done by bombarding a
Hi,
On 22-1-2013 16:57, Terry Blanton wrote:
Who could have predicted it would be Kurzweil and Google:
http://www.technologyreview.com/view/510121/ray-kurzweil-plans-to-create-a-mind-at-google-and-have-it-serve-you/
?
Ok, I'm now just playing Hal's advocate: and who is going to give it a
Thanks for the explanations!
From: Edmund Storms [mailto:stor...@ix.netcom.com]
Sent: Wednesday, January 23, 2013 2:10 PM
To: vortex-l@eskimo.com
Cc: Edmund Storms
Subject: Re: [Vo]:Chemonuclear Transitions
On Jan 23, 2013, at 2:56 PM, MarkI-ZeroPoint wrote:
Thanks Ed, but
Well Lou, I doubt this can be practical. Most of the energy in the D+
beam will result in heat with a little energy from fusion added.
Meanwhile, an apparatus is required to supply a very intense D+
beam.I suspect that once the D+ concentration gets too high in the
target, the enhanced
Andrea Rossi
January 23rd, 2013 at 5:14 PM
Dear Steven N. Karels:
I am so glad of your comment! I was afraid you could be offended, but, as you
well understood, I just joked with you, not against you. It was just a
homouristic way to tell you I can’t explain what happens inside the reactor.
-Original Message-
From: Rob Dingemans
Terry Blanton wrote:
Who could have predicted it would be Kurzweil and Google:
http://www.technologyreview.com/view/510121/ray-kurzweil-plans-to-create-a-m
ind-at-google-and-have-it-serve-you/
Ok, I'm now just playing Hal's advocate: and who is
On Wed, Jan 23, 2013 at 6:26 PM, Jones Beene jone...@pacbell.net wrote:
And why stop at one?
There should be tons of thetans Cruising around. ;-)
Hi,
On 24-1-2013 0:56, Terry Blanton wrote:
On Wed, Jan 23, 2013 at 6:26 PM, Jones Beene jone...@pacbell.net wrote:
And why stop at one?
There should be tons of thetans Cruising around. ;-)
And there are otherwise plenty of birds with Grease on their wings ;-)
Kind regards,
Rob
That should be easy enough to carry out. I will order some constantan and
some more nitinol.
Are you thinking that the hydrogen loading may be unnecessary?
On Wed, Jan 23, 2013 at 8:50 AM, Jones Beene jone...@pacbell.net wrote:
Jack,
** **
If anomalous cooling in Nitinol (putative)
Hydrogen loading will surely be necessary at some level, but can possibly be
accommodated by combination of low pH electrolyte, not so low as to dissolve
the wires. or preferably by preloading etched wires for a day under H2
pressure and modest heat, or even the simplest expedient which would be
I could run some low power electrolysis for a day or two in some diluted
hydrochloric acid. Think that would do the trick? Or do you have another
idea for the acid?
On Wed, Jan 23, 2013 at 7:33 PM, Jones Beene jone...@pacbell.net wrote:
Hydrogen loading will surely be necessary at some
And the calorimetry? How will you know if you have something?
I am using a basic open electrolytic cell with with a temperature sensor in
the cell and one for ambient temperature. Temperature and power input
levels are recorded every second. I start with an elevated baseline
temperature in the cell above ambient and do several repeated runs allowing
it to
A combination of vinegar and hydrogen peroxide works with nickel-copper and
is very safe. This is often used to etch PCBs. Using a few volts with the
wire as cathode should also load H2. The muriatic may work better on
Nitinol.
This is not precise calorimetry - Terry. you can to call it
Hi Jack,
Keep on experimenting! Your following the same track that I did, and
Nitinol was one thought I had. The idea at the time was to load hydrogen
into nitinol, and then crank up the current to flex the metal lattice with
the H embedded in the crystal structure. I think I had the
Hi Ed, and fellow vortexians, I've been thinking about the issue of proton
fusion in metals, that is can H in metals be so condensed to start the
proton-proton chain reaction within a metal lattice. The proton-proton
chain reaction is initiated with a strong interaction between two protons,
The description of the Shukla-Eliasson (SE) force is just been released and
is a major breakthrough in understanding electron screening behavior within
heavy concentrations of degenerate electrons.
http://nanopatentsandinnovations.blogspot.com/2012/03/new-physical-attraction-between-ions-in.html
By the way, Anderson localization will concentrate degenerate electrons
near cracks in a metal lattice. This will catalyze the formation of proton
crystals within the cracks as seen by Miley in his experimentation.
Ed Storm said this about Miley’s experimentation in “Edmund Storms /
Journal of
30 matches
Mail list logo
