Re: [Vo]:melted alumina tube

modes of these systems. >>>>> >>>>> >>>>> >>>>> If I may fire away: >>>>> >>>>> What size Fe2O3 and TiH2 grains were present? >>>>> >>>>> Is this mixture generally not hygroscopic, a

Re: [Vo]:melted alumina tube

thermal sticks on accessible surfaces. Welders use these to determine preheating temperatures. They may provide a cheap temperature measure for you. Keep it shielded--good luck. Bob - Original Message - FROM: Jack Cole [9] TO: vortex-l@eskimo.com [10] SENT: Tuesday, Mar

Re: [Vo]:melted alumina tube

The hydrogen combustion theory does not explain why the heat is restricted primarily to the outside of the tube. The adulterated tube material would have a lower melting temperature than the pure alumina powder covering. Hydrogen that is coming from inside the tube would melt the tube as well as th

Re: [Vo]:melted alumina tube

nd TiH2 grains were present? >>>> >>>> Is this mixture generally not hygroscopic, and therefore is curing the >>>> reactor’s sealant a simple matter as compared to LAH? >>>> Are you tumbling or milling these reactants, or performing any other >>

Re: [Vo]:melted alumina tube

sharing, and keep up the great work! -Bob FROM: Jack Cole [mailto:jcol...@gmail.com [4]] SENT: Tuesday, March 17, 2015 1:08 PM TO: vortex-l@eskimo.com [5] SUBJECT: Re: [Vo]:melted alumina tube Bob, The input power was ~260W. I don't know what the R value of the insulation is. I had th

Re: [Vo]:melted alumina tube

Are you tumbling or milling these reactants, or performing any other >>> notable processing steps, prior to putting them into the reactors? >>> >>> >>> >>> Thanks for sharing, and keep up the great work! >>> >>> >>> >>> -Bo

Re: [Vo]:melted alumina tube

ilto:jcol...@gmail.com>] *Sent:* Tuesday, March 17, 2015 1:08 PM *To:* vortex-l@eskimo.com <mailto:vortex-l@eskimo.com> *Subject:* Re: [Vo]:melted alumina tube Bob, The input power was ~260W. I don't know what the R value of the insu

Re: [Vo]:melted alumina tube

ure generally not hygroscopic, and therefore is curing the >>>> reactor’s sealant a simple matter as compared to LAH? >>>> Are you tumbling or milling these reactants, or performing any other >>>> notable processing steps, prior to putting them into the reactors? >>&g

Re: [Vo]:melted alumina tube

generally not hygroscopic, and therefore is curing the >>> reactor’s sealant a simple matter as compared to LAH? >>> Are you tumbling or milling these reactants, or performing any other >>> notable processing steps, prior to putting them into the reactors? >>>

Re: [Vo]:melted alumina tube

keep up the great work! >> >> >> >> -Bob >> >> >> >> >> >> *From:* Jack Cole [mailto:jcol...@gmail.com] >> *Sent:* Tuesday, March 17, 2015 1:08 PM >> *To:* vortex-l@eskimo.com >> >> *Subject:* Re: [Vo]:melted alumina tube >&

Re: [Vo]:melted alumina tube

haring, and keep up the great work! >> >> >> >> -Bob >> >> >> >> >> >> *From:* Jack Cole [mailto:jcol...@gmail.com] >> *Sent:* Tuesday, March 17, 2015 1:08 PM >> *To:* vortex-l@eskimo.com >> >> *Subject:* Re: [Vo]:mel

Re: [Vo]:melted alumina tube

to get a measure > of the temperature gradient along the tube. Also another easy way to > determine temperatures is the use of thermal sticks on accessible > surfaces. Welders use these to determine preheating temperatures. They > may provide a cheap temperature measure for you. >

RE: [Vo]:melted alumina tube

ge - From: Jack Cole <mailto:jcol...@gmail.com> To: vortex-l@eskimo.com <mailto:vortex-l@eskimo.com> Sent: Tuesday, March 17, 2015 9:39 AM Subject: Re: [Vo]:melted alumina tube To add a couple of more details. The agglomerated piece of material is extremely hard. I tried to b

Re: [Vo]:melted alumina tube

essage - > *From:* Jack Cole > *To:* vortex-l@eskimo.com > *Sent:* Tuesday, March 17, 2015 9:39 AM > *Subject:* Re: [Vo]:melted alumina tube > > To add a couple of more details. The agglomerated piece of material is > extremely hard. I tried to break it off with pliers, but

Re: [Vo]:melted alumina tube

It is possible that the LENR reaction was not carried inside the tube in the fuel, but in the alumina cement that covered the heater wire. The cement must have some residual water in it. Therefore, a sonoelectrochemistry based mechanism might be producing nanoparticles in this cement and these part

Re: [Vo]:melted alumina tube

Dear Jack, Congratulations. Anyone that has seen a meltdown, knows that LENR is real. Your use of a pulses current may be what caused the LENR reaction to fire up. Current pulses might be what the key is. The triac may be producing a periodic sharp current rise and an associated magnetic field ax

Re: [Vo]:melted alumina tube

s use these to determine preheating temperatures. They may provide a cheap temperature measure for you. Keep it shielded--good luck. Bob - Original Message - From: Jack Cole To: vortex-l@eskimo.com Sent: Tuesday, March 17, 2015 9:39 AM Subject: Re: [Vo]:melted alumina

Re: [Vo]:melted alumina tube

There doesn't appear to have been any melting inside the tube. It's interesting that the fuel formed a small diameter cylinder. There was also a small amount of fine powder left in the cell. The fuel is shown in the picture (looks like a little stick). http://www.lenr-coldfusion.com/wp-content/

Re: [Vo]:melted alumina tube

To add a couple of more details. The agglomerated piece of material is extremely hard. I tried to break it off with pliers, but it seemed like it would take more force than to break the entire cell. The resistance wire is extremely difficult to separate from the cell. I plan to open the cell wit