Hi -
I've been using FreeBSD jail for a while, but am new to Vserver, which
seems like cool stuff, I'm thinking of using it for hosting customers.
I've got a few questions for the list.
1. On FreeBSD, a common way to share files across virtual servers is to
mount them using unionfs read-only,
On Thu, 8 Jan 2004, Herbert Poetzl wrote:
recently (end of december last year) somebody posted
a mystic message to one of the german webhosting lists
stating, that vserver is insecure, and that he would
suggest not to use it (no details where given) ...
it 'seems' that the poster was
Sorry, this is a bit off-topic:
I've seen quite a few mentions of Virtuozzo and Ensim VPS solutions.
Virtuozzo seems to be particularly keen on how they are so super advanced,
no open source thing comes even close.
Anyone here have any experience with those and can give the skinny on
what those
Sorry if these are FAQ's:
Are there any problems with SMP and vserver (1.24)? We're thinking of
ordering a dual cpu xeon machine, but I wanted to check first to make sure
that there are no known problems.
Also - how stable/unstable is the 1.3.x release - is it better to try 1.3
if starting from
I did some testing, and it works for me with the setup below but even
without adding the explicit route for the network, i.e. the vservers with
the interface with netmask of /32 stays up and responsive after I take the
first ip in the scope (and the whole scope with it) down - am I missing
Have you tried restarting sshd after starting vserver:
# vserver blah exec service sshd restart
[or whatever the command may be for your Linux distro]
I'm curious if this is a similar problem to what I saw (see messages from
last week) with permission denied to pts/X (X is a number). For me
On Wed, 17 Mar 2004, Dariush Pietrzak wrote:
/proc/mounts is evil too since it discloses the devices where the
virtual server and other virtual servers are mounted.
I don't think proc/mounts counts as 'evil'.
Although it would be nice to have virutalised and configurable
proc/mounts
Just to clarify - this is only a problem for the sendmail running on the
main (ctx 0) server, correct?
Grisha
On Thu, 18 Mar 2004, Stadt Zirndorf, EDV wrote:
I found the solution, there is a submit.cf for sendmail being used when
sendmails gets invoked like this:
sendmail -v [EMAIL
On Thu, 18 Mar 2004, Herbert Poetzl wrote:
saving the 'current' value on vserver stop and restoring it on vserver
start should be sufficient ...
I guess I'm confused as to whether mounting the filesystem with tagctx is
sufficient. I'm on 1.26 (so I don't have lsxid), and I was following
-
Von: Gregory (Grisha) Trubetskoy [mailto:[EMAIL PROTECTED]
Gesendet: Donnerstag, 18. M?rz 2004 20:56
An: '[EMAIL PROTECTED]'
Betreff: Re: [Vserver] AW: several sendmail running, how to deliver mail
local?
Just to clarify - this is only a problem for the sendmail running on the
main (ctx 0
On Sat, 20 Mar 2004, Enrico Scholz wrote:
There you have a 'vprocunhide' (init)script which unhides some files;
the current list is available at
http://savannah.nongnu.org/cgi-bin/viewcvs/util-vserver/util-vserver/distrib/misc/vprocunhide-files?rev=HEAD
Would you consider this a pretty
I know someone who has a virtuozzo-base hosting account, and it appears
that their latest version aloows for iptalbes/ipchains to work somehow.
Anyone know how it works, and is this something that might be possible
with VServer, perhaps in the future?
Grisha
bug?)
So the solution is either:
1. not to use S_NICE
2. comment out pam_limits.so from both /etc/pam.d/sshd and
/etc/pam.d/system-auth
Grisha
On Mon, 8 Mar 2004, Gregory (Grisha) Trubetskoy wrote:
I saw this posting earlier on:
http://www.paul.sladen.org/vserver/archives/200309/0176
I've got a vserver that keeps running out of inodes.
from the vserver root dir, find . | wc -l shows 42287.
but df -i from within vserver shows:
df -i
FilesystemInodes IUsed IFree IUse% Mounted on
/dev/hdv1 20 105933 94067 53% /
105933 - 42287 = 63646
It looks to me as if FreeVPS is somehow trying to compete with VServer by
keeping its own fork of the project.
What is the reason for that? Why not work on incorporating all these
features into VServer?
Grisha
On Thu, 1 Apr 2004, Alexander Suvorov wrote:
Dear coleagues!
Let us to announce
[I can translate the russian below if someone needs it, it's more than I
need to know :-)]
Anyway - I find the features that FreeVPS describes cool, especially since
we use VServer for commercial hosting I could really use them, but I do
not like the idea of having to use a specific kernel, and
Am I missing something - you're mounting things that are in the shadow
server via --bind - but doesn't this mean that if one of the vservers
unlinks the file in a directory mounted this way, it will be gone for all
other vservers?
BTW, I really wish Linux had something like the FreeBSD unionfs.
On Thu, 8 Apr 2004, Liam Helmer wrote:
I actually looked, for quite a long time, to try and find something that
was similar to the freebsd (?) union mount, or else the uml
copy-on-write system. I haven't found anything that works well yet. So,
instead of that, I worked with the existing
nevermind, I think I found the problem :-)
On Thu, 15 Apr 2004, Gregory (Grisha) Trubetskoy wrote:
I may be missing something obvious, if so forgive me:
For some reason all my vservers resolve names using the main server's
/etc/hosts, not their own
This OS is Fedora C1 (both inside
Has there been any discussion of having a feature whereby a binary would
be executed with higher capabilities automatically?
Something like having a config file of some sort in the main server that
lists a binary, its timestamp, size, an MD5/SHA hash and the capability.
Whenever this binary
On Fri, 7 May 2004, Bjoern Steinbrink wrote:
The vserver script just calls itself with 'exec /sbin/service' instead
of 'service' so that option really just saves a few keystrokes, that's
all, you could also just use the exec call directly.
This is a bit on a different topic, but I just
:
On Fri, May 14, 2004 at 05:12:34PM -0400, Gregory (Grisha) Trubetskoy wrote:
It looks like the attributes that do not require CAP_LINUX_IMMUTABLE (i.e.
anything except IMMUTABLE_[FILE|LINK]FL and APPEND_FL) can by modified by
root from within a vserver:
]# vserver grisha enter
ipv4root
Thanks, Ryan!
It'd be interesting to see numbers for the same test on the same machine
but using User-Mode Linux... :-)
Grisha
On Sat, 22 May 2004, Herbert Poetzl wrote:
On Fri, May 21, 2004 at 11:19:26PM +, [EMAIL PROTECTED] wrote:
Just FYI...
thanks for checking this for us ...
On Tue, 1 Jun 2004, Herbert Poetzl wrote:
currently I have _no_ sponsor sending money, and, although I would
_love_ to spend all my time doing linux-vserver, I have to _work_ to
earn the money to buy food and pay for shelter, connectivity and
clothing ...
Well - having been in this boat
IMHO snmp is very complex by design and as a consequence of that is a
significant security threat. If I was a potential customer of your and you
insisted that I must run snmpd in my server, I'd balk.
There are probably ways to accomplish anything you do via snmp by other
means. E.g. to count
I've been looking at the documentation for the new utils (nice stylesheet,
btw), and it looks like there is a shift from using a single config file
describing a vserver to a hierarchy of files (kinda reminds me of
qmail)...
Just curious - what was the rationale for this shift?
Thanks!
Grisha
Does your apache config have a Listen directive, and if so, what is it?
When Listen does not specify an IP address (e.g. Listen 80), apache
should bind to 0.0.0.0, which doesn't have much to do with the hostname
AFAIK.
If you're using Apache 1.3, then also check the BindAddress directive.
What does the lock flag do? It seems that requesting another context from
within a context is impossible anyway?
Grisha
___
Vserver mailing list
[EMAIL PROTECTED]
http://list.linux-vserver.org/mailman/listinfo/vserver
http://linuxreviews.org/news/2004-06-11_kernel_crash/index.html
Anyone tested this from within a vserver? I'm not near a computer that I
could try this on.
Grisha
___
Vserver mailing list
[EMAIL PROTECTED]
I actually think that in the ideal world the building of the vserver
should be outside the scope of the vserver project anyway, and should be
something that the people in charge of distributions should be providing.
My $0.02
Grisha
On Thu, 17 Jun 2004, Bernhard Duebi wrote:
On Thu,
On Tue, 27 Jul 2004, Herbert Poetzl wrote:
PR
Now you can! Lycos (Europe) has started their VDS
beta testing program, which is 100% bleeding edge
Linux-VServer Technology (vs1.9.2.10 exp. kernel)
/PR
Is there a URL? :-)
Grisha
___
Vserver mailing list
Here is a Python version of a similar thing:
http://www.openvps.org/cvs/viewcvs.cgi/oh-host/scripts/ohdisk?rev=1.2content-type=text/vnd.viewcvs-markup
This isn't really a standalone script because it relies on some other
libs to enumerate vservers, but nonetheless, could be interesting for
Any chance that this will get rolled in to 1.29?
This could be very useful when you have a back-end network that you do not
vservers to have access to...
Grisha
On Fri, 30 Jul 2004, Herbert Poetzl wrote:
On Fri, Jul 30, 2004 at 04:28:02PM +0200, Pavel Semerad wrote:
Hello,
I am long time using
If anyone is interested, here is how I was able to build a vs kernel RPM:
http://www.openvps.org/Plone/docs/developer/kernelrpm
(BTW - anyone feel free to copy this to copy this to the VServer wiki if
you feel its appropriate)
Grisha
___
Vserver
Is it possible to somehow use mount --bind from within a vserver?
(vs1.28).
Grisha
___
Vserver mailing list
[EMAIL PROTECTED]
http://list.linux-vserver.org/mailman/listinfo/vserver
On Fri, 17 Sep 2004, Herbert Poetzl wrote:
On Thu, Sep 16, 2004 at 10:29:52PM -0400, Gregory (Grisha) Trubetskoy wrote:
Is it possible to somehow use mount --bind from within a vserver?
(vs1.28).
not in a secure way with the 2.4 stable branch, but it is with recent
2.6 (vs1.9.x) devel branch
I had something similar happen, but then it turned out the problem was
with my config. I figured it out by inserting an occasional echo statement
into /usr/local/lib/util-vserver/vserver.functions (disableInterfaces() is
the func you'd probably be most interested in) to see what 'ip' commands
I noticed that in vs 1.9.3 ping appears to work even without CAP_NET_RAW
(This is Fedora Core 2).
Just curious, how's this possible?
Thanks!
Grisha
___
Vserver mailing list
[EMAIL PROTECTED]
http://list.linux-vserver.org/mailman/listinfo/vserver
On Fri, 17 Sep 2004, Herbert Poetzl wrote:
On Thu, Sep 16, 2004 at 10:29:52PM -0400, Gregory (Grisha) Trubetskoy wrote:
Is it possible to somehow use mount --bind from within a vserver?
(vs1.28).
not in a secure way with the 2.4 stable branch, but
it is with recent 2.6 (vs1.9.x) devel branch
On Thu, 30 Sep 2004, Matt Nuzum wrote:
Cool.
Could you please detail on the documentation website what happens
during this stage:
from http://www.openvps.org/Plone/download/ISO
You also will need internet access at this point as the buildref process
pulls a few RPM's from the openvps.org site.
I
On Thu, 30 Sep 2004, Herbert Poetzl wrote:
The (very basic so far) instructions on how to use it and the link to the
ISO itself are here:
http://www.openvps.org/Plone/download/ISO
b) 2.4.27 and vs1.29 are out ... how hard is an update?
is it planned in the near future or will this take some
I noticed that in 2.6 kernel you cannot create (hard) links to immutable
files.
So if I am trying to build a unified server, is my only option to remove
the immutable flag temporarily while I link to it? This seems insecure.
Or am I missing something obvious? Has anyone else ran into this?
Hello -
this is vdlimit 0.01, linux 2.6.8.1, vs 1.9.2.
I'm not sure vdlimit is supposed to behave this way, or am I missing
something (as is not unusual):
# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda5 26193716 18202564 6660572 74% /
In vs 1.9.3 I noticed that ifconfig from within a vserver shows the inet
addr of eth0 and lo (in 1.2x it did not) - is this the way it's supposed
to be, or am I missing a configuration option of some kind?
Thanks!
Grisha
___
Vserver mailing list
Strange... after a reboot it behaves differently - pretty much gives me
what I need - hide the IP of eth0, but show the vserver IP. Before it
would hide all interfaces sompletely. Not sure what happened there...
Grisha
On Wed, 6 Oct 2004, Gregory (Grisha) Trubetskoy wrote:
On Wed, 6 Oct 2004
)
Thanks,
Grisha
On Wed, 6 Oct 2004, Herbert Poetzl wrote:
On Wed, Oct 06, 2004 at 04:28:03PM -0400, Gregory (Grisha) Trubetskoy wrote:
In vs 1.9.3 I noticed that ifconfig from within a vserver shows the inet
addr of eth0 and lo (in 1.2x it did not) - is this the way it's supposed
to be, or am I missing
On Tue, 19 Oct 2004, Herbert Poetzl wrote:
already in 2.6.9-final-vs1.9.3-rc4 ;)
What's the URL to get the patches these days? The stuff on the site is
1.9.1.
Thanks,
Grisha
___
Vserver mailing list
[EMAIL PROTECTED]
On Thu, 21 Oct 2004, Thomas Hug wrote:
Hi
On Wed, 20 Oct 2004 11:20, David MacKinnon wrote:
It's also a bit more cpu intensive than drbd. This may or may not be a
concern for you.
On the 1.9.x vserver this can be addressed with vsched. I've been able to
make it work pretty well and plan on
As promised, here are my vsched findings. My set up is
util-vserver 0.30.195 and vs 1.9.3.
The token-bucket scheduler principle is pretty well explained here:
http://www.linux-vserver.org/index.php?page=Linux-VServer-Paper-06
vsched takes the following arguments:
--fill-rate
The
On Thu, 21 Oct 2004, Herbert Poetzl wrote:
yes, this is if the hard scheduler is actually enabled
That's one I forgot to mention - none of this has any visible effect (and
by that I mean inability to drive the load to 30) unless sched_hard flag
is set.
So the pacing example should really be:
On Fri, 22 Oct 2004, Sam Vilain wrote:
Gregory (Grisha) Trubetskoy wrote:
On Thu, 21 Oct 2004, Herbert Poetzl wrote:
yes, this is if the hard scheduler is actually enabled
That's one I forgot to mention - none of this has any visible effect (and
by that I mean inability to drive the load to 30
Here is what we do in OpenVPS. This is Fedora biased.
I think the utils strategy is copy-everything-then-unify, whereas we stuck
to hardlink-as-you-copy-then-leave-it-alone. Either strategy is fine, it
probably more depends on what you're doing. In our case the vserver is
intended to passed to
I haven't seen memory discussed on this list for a while :-)
I see that there are limits listed in the /proc/virtual/XXX/limits file,
but I couldn't find any documentation on what they mean and how to set
them.
I'm especially curious about the RSS limit. I _think_ I've seen mentions
that the
On Mon, 1 Nov 2004, vs-technik wrote:
GGT Not with SMP, redundant power supplies and SCSI hardware RAID. Cheap
GGT dedicated servers are completely worthless IMHO, too bad most people
GGT don't understand it.
oh no!
this is (only) a faith-question.
we use (for all hosting-solutions) _cheap_
On Tue, 9 Nov 2004, [ISO-8859-1] Bj?rn Steinbrink wrote:
On Tue, 9 Nov 2004 12:56:32 -0500 (EST)
Gregory (Grisha) Trubetskoy [EMAIL PROTECTED] wrote:
On Tue, 9 Nov 2004, [ISO-8859-1] Bj?rn Steinbrink wrote:
On Tue, 9 Nov 2004 12:01:33 -0500 (EST)
Gregory (Grisha) Trubetskoy [EMAIL PROTECTED] wrote
there is a 2.6.9 vs 1.9.3 kernel RPM here, if you're interested:
http://www.openvps.org/dist/misc/kernel-2.6.9vs1.9.3-1.i386.rpm
it was built using the config that comes with FC3 rpm, but without any
redhat patches. so it's large and it's got more modules compiled than
there are stars in the
On Sat, 20 Nov 2004, Herbert Poetzl wrote:
hmm, just discovered that CONFIG_INOXID_INTERN is broken
in 1.9.3 so it will probably not work at all ...
Do you have more details on this? It seems to work OK here.
Grisha
___
Vserver mailing list
[EMAIL
On Tue, 23 Nov 2004, Andreea Gansac wrote:
[EMAIL PROTECTED] util-vserver]# vlimit -c 49168 --cpu 30
vc_set_rlimit(): Success
If I run a process that does only while(1){} inside the vserver, the
cpu is used only 25%-30%.
If I'm not mistaken, this simply sets the cpu time to
On Tue, 23 Nov 2004, [iso-8859-1] J?rn Engel wrote:
What most people want in plain English:
o Every user gets some guaranteed lower bound.
o Sum of lower bounds doesn't exceed total resources.
o Most of the time, not all resources get consumed. Add them to the
'leftover' pool.
o Users that
On Wed, 24 Nov 2004, Herbert Poetzl wrote:
Then, if you are a fat jabba, maybe you might end up getting rescheduled
instead of getting more memory whenever you want it!
thought about a simpler approach, with a TB for the
actual page-ins, so that every page-in will consume
a token, and you get a
Is there a flag that can be set that ignores persistent xids and allows a
context to access files which are set to xids other than 0 or itself?
(this is vs 1.9.3)
Thanks!
Grisha
___
Vserver mailing list
[EMAIL PROTECTED]
On Tue, 7 Dec 2004, Darryl Ross wrote:
I haven't had a look to see how you're doing the network stuff, but does
it support (or will it support) the ability to set the ethernet MAC
address for the virtual interface inside a vserver?
AFAIK the decision on whether to accept a packet destined for a
On Thu, 9 Dec 2004, Herbert Poetzl wrote:
ifconfig en0 hw ether 00:01:02:03:04:05
and it doesn't work with non-ngnet setups ...
But wouldnt your solution give the same MAC to all vservers? I thought
he wanted different MAC's for all vservers?
nope, ngnet includes 'virtual' devices per vserver
so
Another tip - put ^19 (without quotes) in the flags file to get
virtualized load average. (This will probably be replaced with a word
eventually in utils, but for now this works). This will make the vservers
see their own load average.
Originally, we were using sched_hard to peg the load on
Hi all, Merry XMas -
Is there a simpler way to track IPC resources short of entering every
context and running ipcs? It seems that context 1 can only see its own
semaphores/locks/etc, wouldn't it make more sense if it saw all of them?
vs1.9.3
Thanks!
Grisha
On Tue, 28 Dec 2004, Herbert Poetzl wrote:
On Mon, Dec 27, 2004 at 02:45:12PM -0500, Gregory (Grisha) Trubetskoy wrote:
Hi all, Merry XMas -
Is there a simpler way to track IPC resources short of entering every
context and running ipcs? It seems that context 1 can only see its own
semaphores
Is this something to worry about on vs 1.9.3 kernels?
http://isec.pl/vulnerabilities/isec-0021-uselib.txt
I saw Fedora released an updated kernel, though the comment at the
beginning of the exploit code in the link above says tested only on
2.4.x. I for one could get it to compile, though I
This thread has lots of info:
http://www.mail-archive.com/vserver@list.linux-vserver.org/msg03324.html
Grisha
On Thu, 13 Jan 2005, shishir randive wrote:
Hi ,
I am new to vserver , I want to know the
details about the Hard CPU scheduler used by the
vserver.
There is a very little
On Thu, 13 Jan 2005, Herbert Poetzl wrote:
On Thu, Jan 13, 2005 at 03:27:19PM +0100, Thomas Weber wrote:
So I think the util-vserver package should make sure that there is
capability support in the kernel before starting the vserver or else it
will silently run insecure vservers!
well, IMHO that
FC3 seems pretty stable:
# cat /etc/fedora-release
Fedora Core release 3 (Heidelberg)
# uptime
15:13:32 up 40 days, 17:59, 2 users, load average: 0.04, 0.05, 0.01
# uname -a
Linux XXX 2.6.9-vs1.9.3x #11 SMP Thu Dec 9 21:10:52 EST 2004 i686 i686 i386
GNU/Linux
Grisha
On Wed, 19 Jan 2005, Eric
On Wed, 19 Jan 2005, Roderick A. Anderson wrote:
Jacques did a pretty good promo for Vserver on the linuxconf list and I
got the impression from it he has at least one Vserver running FC3. I
was going to ask him about the steps he uses to build the the FC3 vserver
kernel -- plus a few other
On Wed, 19 Jan 2005, Roderick A. Anderson wrote:
I keep forgeting to check in at openvps.org I used some instructions I
think you provided to build a FC1 Vserver RPM and it was smooth process.
That system is a AMD K6/2 500 with 256 MBtye RAM and currently running 6
vservers ; four of them web
Hi -
Has anyone else had trouble killing a context that has zombie processes in
it? This creates an annoying situation where the context cannot be started
back up because utils-vserver complain that it is running already, yet I'm
not aware of a way to eliminate a zombie.
This is vs 1.9.3 and
Dimitry -
OpenVPS has a mailing list- [EMAIL PROTECTED]
Grisha
On Fri, 28 Jan 2005, Abdrashitov Dmitry wrote:
Hello!
Is anybody use vserver-hosting from www.openvps.org ?
I have some questions...
Dmitry
___
Vserver mailing list
I just wanted to confirm this on the list, let me know if the following
statement isn't true. (I think that if true, this is something that
should be well documented somewhere):
There is no way to accurately account for a context's memory utilization.
The values reported by vserver-stat and in
On Sun, 20 Feb 2005, Nicolas Costes wrote:
You need to deeply discuss those facts with the company, and why not try to
secure the vservers' future in the job contract... My english is too bad when
it comes to that domain, but I can try to say it like this: I agree to work
for you if you agree to
On Mon, 21 Feb 2005, Herbert Poetzl wrote:
sure, as this is a new concept (basically the linux-vserver
developers are all working for fun in their spare time) so
nobody has really thought about that yet (input appreciated)
What I've seen work great in the past is if you establish a target amount,
What I think would be even more interesting/useful is to run UML inside a
vserver. Has anyone tried it?
Grisha
On Tue, 22 Feb 2005, Matt Ayres wrote:
Here is a patch for Vserver to run under Xen that was posted to the Xen
devel list. It might be useful for some people.
On Fri, 25 Feb 2005, Herbert Poetzl wrote:
Speaking of token-buckets - is there a disk IO TB in the plans somewhere?
I saw a reference to something like that on some UML board today...
Cheers!
Grisha
___
Vserver mailing list
On Wed, 2 Mar 2005, Herbert Poetzl wrote:
kernel, is there any chance VServer patch ever will?
well, actually I do not really consider linux-vserver
so general that it should be on every linux box, be
it my mobile phone or your favorite linux game engine
it's very specific software and I guess
How much (balpark) does an internet connection cost?
On Tue, 22 Mar 2005, Herbert Poetzl wrote:
Hi Community!
the util-vserver tools (which started as a rewrite
of the existing tools jacques provided) did see a
lot of innovative changes and overall improvements
in the last year (or a little
I think OpenHosting could spare about $100/month (about half of 8 hr) -
anyone else would like to pitch in?
Grisha
On Wed, 23 Mar 2005, Herbert Poetzl wrote:
On Tue, Mar 22, 2005 at 02:24:35PM -0500, Gregory (Grisha) Trubetskoy wrote:
How much (balpark) does an internet connection cost?
a quick
Here is a ./ link from old times:
http://slashdot.org/articles/01/11/06/2034233.shtml
Grisha
On Fri, 25 Mar 2005, [ISO-8859-1] Benoit St-Andr? wrote:
Timo M?ller a ?crit :
Hi,
who exactly has started the vserver Project and when?
Thanx
___
Vserver
There is something like this in a patch to UML developed by the Linode
folks:
http://www.linode.com/forums/archive/o_t/t_790/linode.com_status_update_04_06_04.html
Looks like a token bucket, only for IO.
It may be easier to do something like this in UML because their IO driver
is a constant
see this thread (read the whole thread, my post has some inaccuracies
corrected in follow-ups)
http://www.mail-archive.com/vserver@list.linux-vserver.org/msg03324.html
Grisha
On Fri, 1 Apr 2005, Peter V. Saveliev wrote:
...
# vsched --help
Usage:
vsched
[--xid xid]
I would also keep measurements of CPU ticks used. Since IO requires CPU
cycles - is it possible that a CPU sched_hard indirectly limits IO just as
well?
Grisha
On Fri, 1 Apr 2005, Matthew Nuzum wrote:
On Thu, Mar 31, 2005 at 09:22:10PM -0600, Matthew Nuzum wrote:
I think I can create a test
The CPU ticks are in /proc/virtual/xid/sched
Grisha
On Fri, 1 Apr 2005, Matthew Nuzum wrote:
I would also keep measurements of CPU ticks used. Since IO requires CPU
cycles - is it possible that a CPU sched_hard indirectly limits IO just as
well?
Grisha
How do you do that?
P.S. I'm still compiling
This may be somewhat off-topic, but why is it that people like centos
which seems to me like REL without support. Since support is what REL is
all about, wouldn't it be better to go with FC3 (soon 4) rather than a
bunch of outdated software that comprises EL?
What am I missing?
Grisha
On Mon,
Excellent! Is NG going to be part of it?
Grisha
On Mon, 11 Apr 2005, Herbert Poetzl wrote:
Greetings Folks!
we had a longer discussion last night and we came to
the conclusion that this is the right time to start
working on a stable 2.0 release (for 2.6.x)
so while this will involve a lot of work
I also like the file format - indentation as a delimiter... Very Pythonic
and IOS-ish at the same time :)
On Sat, 16 Apr 2005, Herbert Poetzl wrote:
On Fri, Apr 15, 2005 at 03:11:24PM +0400, Peter V. Saveliev wrote:
...
I did it :)
Test build of RAD GNU/Linux uses vserver for regular service
On Wed, 27 Apr 2005, Herbert Poetzl wrote:
On Tue, Apr 26, 2005 at 03:31:33PM -0400, Gregory (Grisha) Trubetskoy wrote:
Has anyone here tried using automount with vservers?
did you try to mount the autofs 'just' inside the vserver namespace
(well, that's what I would do anyways)
'just' would
On Tue, 3 May 2005, Sam Vilain wrote:
Bootstrapping Images
The status of debootstrap and `rpmstrap' in the current utilities was
briefly discussed, so that vservers of lots of different types could
easily be built without installing extra utilities manually.
I haven't seen
On Wed, 4 May 2005, Herbert Poetzl wrote:
heh, how far is OpenVPS now? and what about it's 'current'
targets/aims/whatever ...
maybe you could give a short overview?
Well... targets/aims is a big question that I've been trying to answer for
a long time :-)
The idea is to provide the missing
Has something changed in the way vs1.9.5 accounts for CPU? We've upgraded
from 2.6.10-vs1.9.4 to 2.6.11.7-vs1.9.5 and in /proc/virtual/xid/sched I
see:
snip
cpu 0: 0 0 0
cpu 1: 0 0 0
cpu 2: 0 0 0
cpu 3: 0 0 0
after having run cat /dev/zero | bzip2 /dev/null in this vserver for a
while.
Let
On Thu, 12 May 2005, Herbert Poetzl wrote:
okay, adding the 'counters' back should not be too hard,
so I take that as 'feature request' ...
... or a 'feature return' :-)
Thanks,
Grisha
___
Vserver mailing list
Vserver@list.linux-vserver.org
On Mon, 16 May 2005, Werner Schalk wrote:
# touch /var/run/mysqld/mysqld.sock
# chown mysql:mysql /var/run/mysqld/mysqld.sock
# ls /var/run/mysqld/mysqld.sock -la
-rw-r--r-- 1 mysql mysql 0 May 26 04:11 /var/run/mysqld/mysqld.sock
Just a suggestion:
# chown mysql:mysql /var/run/mysqld
Grisha
I've been trying to follow: http://linux-vserver.org/NGNET-Testing-HOWTO
with 2.6.11.10-vs2.0-rc2, but I get:
# vnet -x -n -d lo
vc_add_vndev: Function not implemented
I must be missing something obvious :-)
TIA
Grisha
___
Vserver
On Thu, 23 Jun 2005, Gregory (Grisha) Trubetskoy wrote:
This is called PR. If you read this, you'll have a better idea of what's
going on here:
http://www.pycon.org/data/95/pycon-20050325-1-0900-95-ike.mp3
oops, bad paste job - the link is:
http://www.paulgraham.com/submarine.html
grisha
On Fri, 24 Jun 2005, Mike Tierney wrote:
As much as I like Vservers (we use them on 2 of our Production
servers!!) it looks like the Xen project (open source virtual machine
software) IS getting LOTS of media coverage and attention/resources from
vendors (Novell, IBM, Sun, HP, Redhat, etc).
On Sun, 26 Jun 2005, Hans Eschler wrote:
What are the possibilities of using linux-vserver virtual machines with
loadbalancers.
Roundrobin, direct routing or nat?
We've had succesfully set up direct server return load-balancing, where
vservers were on different physical machines.
Direct
1 - 100 of 112 matches
Mail list logo
