Re: [weewx-user] Resource busy - raspbian buster, weewx 4 and WMR200

It looks like the initial error was a read failure from the device. The second error is despite retries the resource is not reset to re-open and re-claim. Since the system worked for a long time without this failure, I would think something about the new installation. If the initial error

Re: [weewx-user] Re: draw user-defined lines in graphics

Hi Remy, I'm happy the plots worked out! Sorry, but I've never worked with the SteelSeries Gauges. I was hoping someone else might answer, but maybe you'd have better luck asking in a new topic. Good luck! On Thursday, May 28, 2020 at 2:58:06 AM UTC-6, Remy LAVABRE wrote: > > Another thing,

Re: [weewx-user] Confusion on installing Weewx 4.1

On 28/05/2020, michael form wrote: > Hello: > > I am confused about what is necessary to install Weewx 4.1 using Python 3. > I have seen many problems with people trying to do this using a *1-Wire > interface* like I am using on a Raspberry Pi, running Buster. The biggest hurdle was the

[weewx-user] Re: Broken python dependency with CentOS 8

Here is a quick rpm that should fake out things for you. Try installing this first and then the weewx rpm for centos8. These aren't digitally signed, so if rpm barks at you, 'use the force Luke' :-) I've attached the spec file just so you can see what it has inside. If you need to tweak it,

Re: [weewx-user] Re: Broken python dependency with CentOS 8

Could one of you two file an issue so we can track this? If we can't make a package that "just installs," there should be at least some documentation telling a user what to do. -tk On Thu, May 28, 2020 at 5:54 PM vince wrote: > On Thursday, May 28, 2020 at 4:47:51 PM UTC-7, David wrote: >> >>

Re: [weewx-user] Re: Ubuntu 16 installation issues

Just wanted to make sure it still works! I don't have access to an Ultimeter. If you've got the configuration set up, a test under Python 3 would also be welcome. -tk On Thu, May 28, 2020 at 6:51 PM Francisco Puig wrote: > Replaced file / restarted service and its up and running! Should I

Re: [weewx-user] Re: Ubuntu 16 installation issues

Replaced file / restarted service and its up and running! Should I look for something in particular to test or just code optimization? On Thursday, May 28, 2020 at 9:27:22 PM UTC-4, Tom Keffer wrote: > > Francisco, could you do me a favor and test this version. It is slightly > more efficient.

Re: [weewx-user] Sucess running Weewx on Synology VM - Centos-8 with USB Datalogger

Nicely done! -tk On Thu, May 28, 2020 at 6:24 PM Foo Foo wrote: > Just thought you all would like to know that I've got weewx running on a > Synology DS218+ VM Centos-8 using a Weatherlink USB datalogger. > It is currently updating a Wunderground station, KVTEASTD12. > > > -- > You received

Re: [weewx-user] Re: Ubuntu 16 installation issues

Francisco, could you do me a favor and test this version. It is slightly more efficient. -tk On Thu, May 28, 2020 at 6:18 PM Francisco Puig wrote: > Hi Tom, > > Yes, the latest driver file fixed the errors and I'm up and running! > > Thanks for your help / work. > > On Wednesday, May 27, 2020

[weewx-user] Re: Sensor status.

I have the same question. <2.45 is low voltage. That's where the solar panels kick in. I couldn't find where the voltage is converted to LOW. It seems hard coded. Low voltage triggers things to pause to save power in the Tempest. LOW is currently a false indicator. A pointer to where I

[weewx-user] Sucess running Weewx on Synology VM - Centos-8 with USB Datalogger

Just thought you all would like to know that I've got weewx running on a Synology DS218+ VM Centos-8 using a Weatherlink USB datalogger. It is currently updating a Wunderground station, KVTEASTD12. -- You received this message because you are subscribed to the Google Groups "weewx-user"

[weewx-user] Re: Ubuntu 16 installation issues

Hi Tom, Yes, the latest driver file fixed the errors and I'm up and running! Thanks for your help / work. On Wednesday, May 27, 2020 at 3:28:25 PM UTC-4, Francisco Puig wrote: > > Hi all, > > I'm trying to migrate my WeeWX RPi server to a Ubuntu 16 server and I'm > getting these errors. I

Re: [weewx-user] Re: Ubuntu 16 installation issues

Hi Tom, Yes, the latest driver file fixed the errors and I'm up and running! I have an issue that I can't see the internal webpage for the station but looks like its creating / updating the www files. Seems like the path for the web server changed but since I'm running other scrips on the

[weewx-user] Re: Broken python dependency with CentOS 8

On Thursday, May 28, 2020 at 4:47:51 PM UTC-7, David wrote: > > Hi Vince, > I could force the rpm installation, but was hoping to get the WeeWX rpm > file fixed since this will be an ongoing issue. > > Given people are all volunteers, you might be waiting a while for any particular fix in a

[weewx-user] Re: Broken python dependency with CentOS 8

On Friday, May 29, 2020 at 8:49:22 AM UTC+9:30, vince wrote: > > On Thursday, May 28, 2020 at 4:16:47 PM UTC-7, David wrote: >> >> Hi Robert, >> Thanks for the reply. >> I have tried this but unfortunately it doesn't solve the problem. >> While it provides a '/usr/bin/python' file, it doesn't

Re: [weewx-user] Rsync issue

On Thursday, May 28, 2020 at 3:16:04 PM UTC-7, Benjamin Trey Blue wrote: > > ...but I'm too Linux-dumb to have figured it out yet and I'm not really > sure how to go about even troubleshooting it further. > > Should I maybe consider setting-up weewx to run as a non-root user and > then

[weewx-user] Re: Broken python dependency with CentOS 8

On Thursday, May 28, 2020 at 4:16:47 PM UTC-7, David wrote: > > Hi Robert, > Thanks for the reply. > I have tried this but unfortunately it doesn't solve the problem. > While it provides a '/usr/bin/python' file, it doesn't solve the problem > of providing a package which has the required

[weewx-user] Re: Broken python dependency with CentOS 8

Hi Robert, Thanks for the reply. I have tried this but unfortunately it doesn't solve the problem. While it provides a '/usr/bin/python' file, it doesn't solve the problem of providing a package which has the required dependency. Regards David On Friday, May 29, 2020 at 2:22:06 AM UTC+9:30,

Re: [weewx-user] Rsync issue

That's basically what I do. The process weewxd gets run as user 'weewx', with the .ssh subdirectory in its home directory. See the wiki article *Run as a non-root user *. But, you can do it as root. Just make sure the proper credentials

Re: [weewx-user] Rsync issue

Hey Tom, I haven't made any changes to the user account that weewx uses by default - I had assumed from my reading that it defaults to root. The only two non-system accounts on the RPi are root and pi. Sudo wee_reports works from the terminal though, so there has to be some discrepancy with

Re: [weewx-user] Rsync issue

Thanks for the effort, anyway, John! On Thursday, May 28, 2020 at 2:33:11 PM UTC-4, John Kline wrote: > > That’s too bad. I believe you are getting this error because it is trying > too many SSH keys. IdentitiesOnly should have fixed that. > > On May 28, 2020, at 10:01 AM, Benjamin Trey Blue

[weewx-user] Problem converting to python3

WeeWX 4.1.0 Installed via. package manager I figured I would try and get my station up and running with 4.1 and python3 today, but ran into a problem. For some reason, the aqi extension (https://github.com/jonathankoren/weewx-aqi) can't find the calculator module if I switch /etc/default/weewx

Re: [weewx-user] V4 with python2 OWFS errors

Just reread are you looking for my sensor data collection file (it collects the data from my i2C BMP085) this is done as a service, it gets all my data creates a csv file in ram which I then read with the piweather Driver in weewx. On my new install (from scratch) Adafruit_Python_BMP,

Re: [weewx-user] V4 with python2 OWFS errors

Don’t know, never thought of it. I included it with another post the other day, but since then modified because it would not work with new install. Which I have now gone to weewx v4.1 as well and all OK. I will experiment and let you know... Nev On Thursday, May 28, 2020 at 4:54:37 PM UTC+10,

[weewx-user] Re: probs updating from 4 to 4.1

> ftpgenerator: (0): caught exception '': [Errno 111] Connection refused Connection refused means you are trying to connect to a computer that isn't running the service you're trying to connect to. Is it possible you have a typo in weewx.conf for the system name (or address) you hope to

Re: [weewx-user] FTP problems

I just noticed that in refactoring the ftp uploader, the function _make_remote_dir() never gets called! Try this version of weeutil/ftpupload.py. -tk On Thu, May 28, 2020 at 12:50 PM Tom Keffer wrote: > Hard to say, but I think you're getting hit by issue #284 >

Re: [weewx-user] probs updating from 4 to 4.1

Hello, Eric Two things: 1. Can you post your section [FTP], after obfuscating anything personal. 2. Set the debug flag *in the [FTP] section*, then run weewxd from the command line. This will print out (to the console) lots of extra information about what's going on inside FTP. [FTP] ...

[weewx-user] probs updating from 4 to 4.1

Hello- I was running WEEWX 4.0 on my RaspberryPi until yesterday- when I did an upgrade and accepted V4.1. I have no success getting my web pages posted to my web server (FTP toWWW.N8AAY.NET). Below is text from my syslog with DEBUG set. May 28 16:00:16 raspberrypi weewx[1933] DEBUG

Re: [weewx-user] Rsync issue

Are you running wee_reports as the same user as weewxd? Perhaps the latter does not have access to the keys? On Thu, May 28, 2020 at 10:01 AM Benjamin Trey Blue wrote: > Ahhh, got it - thank you. Added it there and I can see it being passed, > but the result is the same: > > > May 28 12:51:17

Re: [weewx-user] FTP problems

Hard to say, but I think you're getting hit by issue #284 . Try adding an option secure_data and setting it to false: [[FTP]] ... secure_ftp = True secure_data = False -tk On Thu, May 28, 2020 at 9:36 AM Richard Cropper wrote: > Thanks Tom >

Re: [weewx-user] Rsync issue

That’s too bad. I believe you are getting this error because it is trying too many SSH keys. IdentitiesOnly should have fixed that. >> On May 28, 2020, at 10:01 AM, Benjamin Trey Blue >> wrote: >  > Ahhh, got it - thank you. Added it there and I can see it being passed, but > the result is

[weewx-user] Sending data from WS-1001-Wifi to weewx

Hi all, I apologize for a topic that probably has already been covered in detail...I attempted to conduct a thorough search of my options but I am a little confused so I just wanted to see if I could gain some clarity. I have an Ambient Weather WS-1001-Wifi that has been running for

Re: [weewx-user] Rsync issue

Ahhh, got it - thank you. Added it there and I can see it being passed, but the result is the same: May 28 12:51:17 raspberrypi weewx[10689] ERROR weeutil.rsyncupload: > [['rsync', '--archive', '--stats', '-e ssh -o IdentitiesOnly=yes', > '/var/www/html/',

[weewx-user] Re: Broken python dependency with CentOS 8

David, Take a look at: alternatives --list You can then set the Python version (3 in this example ): alternatives --set python /usr/bin/python3 This should get you going. On Thursday, May 28, 2020 at 10:35:28 AM UTC-4, David wrote: > > Hi All, > I'm trying to install WeeWX v4.1.0 on

Re: [weewx-user] Rsync issue

Oops, I meant the [[RSYNC]] section. [[RSYNC]] ssh_options = -o IdentitiesOnly=yes >> [[SSH]] >> ssh_options = -o IdentitiesOnly=yes > On May 28, 2020, at 8:56 AM, Benjamin Trey Blue wrote: > >  > Thanks for the reply - I do not see a section for [[SSH]] in my weewx.conf - > do I

Re: [weewx-user] FTP problems

Thanks Tom I had in fact tried those steps but did so again, without success. Suspecting that the directory might be the cause even though its permissions looked good, I deleted the weewx directory and then created it again. This had made a difference but not solved the problem. Here's an

[weewx-user] Re: Account of setting up an Ambient WS-2902A with SDR and an additional sensor

Thanks for the great writeup. I'm currently using GW-1000s for my stations, but my next project will be solar powered Your method uses a great deal less power and will come in very handy. On Monday, May 25, 2020 at 1:33:40 AM UTC-5, David Robinson wrote: > > Of possible interest: > > I wrote

Re: [weewx-user] Rsync issue

Thanks for the reply - I do not see a section for [[SSH]] in my weewx.conf - do I nest that under the same [StdReport] section where [[RSYNC]] is found? I pasted it just below the end of [[RSYNC]] but can't see where the option was passed along: May 28 11:45:58 raspberrypi weewx[8853] ERROR

Re: [weewx-user] Rsync issue

Sorry, didn’t mean to send that yet: Should read: Does it work if you add the following to the SSH configuration in weewx.conf? [[SSH]] ssh_options = -o IdentitiesOnly=yes > On May 28, 2020, at 8:34 AM, John Kline wrote: > >  > Does it work if you add: > > [[SSH]] > ssh_options = -o

[weewx-user] Rsync issue

Hey all, I installed (DEB package install) and configured weewx on RPi last week and after enjoying it on my LAN, I am now trying to set-up rsync to send it to a website. I called myself following the rsync guide at http://www.weewx.com/docs/usersguide.htm#config_RSYNC and setting up

[weewx-user] Broken python dependency with CentOS 8

Hi All, I'm trying to install WeeWX v4.1.0 on CentOS 8 and am running into dependency issues with '/usr/bin/python'. # yum install weewx Last metadata expiration check: 0:59:04 ago on Thu 28 May 2020 22:48:17 ACST. Error: Problem: cannot install the best candidate for the job - nothing

[weewx-user] Re: Running weewx with a Vantage weather station and GW1000 - soil moisture sensors

Thanks Gary, two instances it is. Rich On Thursday, May 28, 2020 at 12:59:46 AM UTC-7, gjr80 wrote: > > Hi, > > Short answer is you will need to run two instances of WeeWX, either on a > single device or separate devices. I am in much the same boat having run > the vantage driver for many

Re: [weewx-user] Database Problem

Also a big "thank you" for all the work and the support here. I guess I don't have to ask myself anymore, if there is a difference between weewx.manager.DaySummaryManager and weewx.wxmanager.WXDaySummaryManager Am Donnerstag, 28. Mai 2020 15:36:55 UTC+2 schrieb Tom Keffer: > > Fixed in commit

Re: [weewx-user] Database Problem

Fixed in commit 6e84302 . I also fixed the online version at weewx.com. On Thu, May 28, 2020 at 6:31 AM Tom Keffer wrote: > Yes, unfortunately they are typos. They should read > > manager =

Re: [weewx-user] Database Problem

Yes, unfortunately they are typos. They should read manager = weewx.manager.DaySummaryManager. Thanks for pointing this out! -tk On Thu, May 28, 2020 at 1:23 AM Michi Kaa wrote: > Today I moved to user.extensions.schema_extended, but when i ran > --rebuild-daily (or reconfigure, I really

Re: [weewx-user] Database Problem

You are missing the bin directory in the path you say you checked. Would you check /usr/share/weewx/bin/weewx/wxmanager.py? The class is there. See: https://github.com/weewx/weewx/blob/master/bin/weewx/manager.py > On May 28, 2020, at 1:23 AM, Michi Kaa wrote: > >  > Today I moved to

Re: [weewx-user] Re: Ubuntu 16 installation issues

I believe I've found the problem. Try this version. On Wed, May 27, 2020 at 4:47 PM Tom Keffer wrote: > Thanks, but I need to see farther up the log. You posted just the very end > of the error. > > On Wed, May 27, 2020 at 4:39 PM Francisco Puig wrote: > >> Hi Tom, >> >> I'm using Python 2,

[weewx-user] Re: minor error on download page

fixed. thank you for pointing it out! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web

[weewx-user] minor error on download page

Hi Tom/Matt, Just letting you know that on: http://weewx.com/downloads/ In the Source Package section, there's an entry 'For MacOS' with a link. However, the link which should point to: http://weewx.com/docs/macos.htm mistakenly points to: http://weewx.com/docs/setup.htm Cheers, Ned

Re: [weewx-user] Re: draw user-defined lines in graphics

Hi Jeff, Thank you for your response. This allowed me to move forward and realize the graph I wanted! :-) I'm sorry I didn't answer you earlier but I had a lot of work and didn't have too much time to take care of Weewx! Thanks again for your information! Another thing, if you had a solution, I'm

Re: [weewx-user] Database Problem

Today I moved to user.extensions.schema_extended, but when i ran --rebuild-daily (or reconfigure, I really can't remember) I got an error that there is no "weewx.wxmanager.DaySummaryManager". I checked /usr/share/weewx/weewx/wxmanager.py and there is no such class. But there is

[weewx-user] Re: Database Problem

Sorry Im a little confused here. If as an example you tried to add something new into weewx.sdb by using import schemas.wview schema_extended = schemas.wview.schema + [('whateveryoulikehere', 'REAL')] in the extension.py file with manager = weewx.manager.DaySummaryManager I can see people falling

[weewx-user] Running weewx with a Vantage weather station and GW1000 - soil moisture sensors

Hi, Short answer is you will need to run two instances of WeeWX, either on a single device or separate devices. I am in much the same boat having run the vantage driver for many years and recently bought a GW1000 and a number of temp/hum sensors and soil moisture sensors. A given WeeWX

Re: [weewx-user] V4 with python2 OWFS errors

Hi Neville, Do you know if the pyweather driver can be used as service not a driver ? I only need the barometer bit but as you have confirmed it it working with python3 it might be a better way to go than the other i2c solution. Gaz -- You received this message because you are subscribed