Re: [weewx-user] Re: Wunderground not working.

Thanks to Thomas I have an answer. The password field is not the password to your account but is the key that WU generates. I put that key in the password field in this very helpfully URL and bobs your uncle it worked. Did the same in the weewx.conf and now I am reporting to WU once again with

[weewx-user] Re: Acurite Atlas Help

Paul, the driver is very well documented. It might make sense to spend some time and read the instructions. It will help you get setup and understand what's going on. Otherwise, we'll need to see some debugs, some configs and more detail aside from "it's not working".

Re: [weewx-user] Re: Wunderground not working.

Sorry. I accidentally gave you a Rapidfire URL. Use this one instead. Same instructions. *https://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?ID=

Re: [weewx-user] Re: Wunderground not working.

The API key is only needed to download data through their API. The upload protocol has not changed. 1, Are you sure you have the right station ID and password? It looks like an authorization error. 2. WU can be very unreliable. Are you getting the error consistently? Or, just every once in a

[weewx-user] Re: Acurite Atlas Help

Paul I start to suspect that the problem may not be WeeWX itself, but router. Are you trying Hijack DNS? Did you setup iptables? Xant -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails

Re: [weewx-user] Error in Humidity in Wundergound Post

No idea what the WMII does for a checksum. Possibilities 1. A simple XOR'ing of the bytes. But, this would leave you with a 1 byte checksum, and it seems the WMII uses 2 bytes. I don't think they would XOR 2 bytes at a time, because then you would have to worry about the "endianness"

[weewx-user] Re: Wunderground not working.

Forgot to add from the Logs Wunderground-PWS: Failed u pload attempt 2: HTTP Error 401: Unauthorized. Doi need to add the station key somewhere that I missed? On Tuesday, September 3, 2019 at 11:03:53 AM UTC-4, Die Fledermaus wrote: > > I have weewx setup on a raspberry pi I can send data to

[weewx-user] Re: Acurite Atlas Help

I am using the sniff mode, but I have a network switch set up with port mirroring: I added the pcap filter as I run multiple weather stations and do not want to get the other stations data going to wunderground. [Interceptor] # This section is for the network traffic interceptor driver.

Re: [weewx-user] Re: Publishing aggregate data, the topic is TOPIC/loop?

Pat writes: > The aggregate topic is hard-coded to /LOOP because weewx operates on the > LOOP method. You can read more about that in the User Guide > . And it's still /loop if you are publishing aggregate information based on archive records (the

[weewx-user] Re: Acurite Atlas Help

On Tuesday, September 3, 2019 at 12:23:30 PM UTC-4, Xant wrote: > > > Paul > > If you succeeded in use the installer, it may have adjusted your > 'weewx.conf' already. If not, include the following: > > [Interceptor] > # This section is for the network traffic interceptor driver. > >

[weewx-user] Re: Publishing aggregate data, the topic is TOPIC/loop?

The aggregate topic is hard-coded to /LOOP because weewx operates on the LOOP method. You can read more about that in the User Guide . On Tuesday, September 3, 2019 at 2:28:33 PM UTC-4, Pat wrote: > > Yes, aggregate will publish all loop data as a

[weewx-user] Re: Publishing aggregate data, the topic is TOPIC/loop?

Yes, aggregate will publish all loop data as a single json array to the /loop topic. If you want individual observations published to their individual topic, use aggregation = individual. If you want a mixture of both, use aggregation = individual,aggregate On Tuesday, September 3, 2019

[weewx-user] Publishing aggregate data, the topic is TOPIC/loop?

Hello!! These are my configurations for transmitting data through Weewx to the MQTT broker: [StdRESTful] ... [[MQTT]] server_url = mqtt://username:password@localhost:1883/ topic = weather/default/default/VantagePro2/ unit_system = METRIC aggregation =

[weewx-user] Re: Acurite Atlas Help

Paul If you succeeded in use the installer, it may have adjusted your 'weewx.conf' already. If not, include the following: [Interceptor] # This section is for the network traffic interceptor driver. # The driver to use: driver = user.interceptor # Specify the hardware

Re: [weewx-user] Error in Humidity in Wundergound Post

I see in the Davis Monitor II driver how to get the two byte checksum from the weather station. Can you point me to an example of how to calculate the checksum from the data bytes for comparison? A Python example would probably give me enough information to modify the driver. -- You received

Re: [weewx-user] Re: MQTT Weewx authentication

Fala Rui! Dont understand the question. Do you mean the port#? Abs Xant -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[weewx-user] Re: Acurite Atlas Help

On Tuesday, September 3, 2019 at 8:51:53 AM UTC-7, Paul Levin wrote: > > On Tuesday, September 3, 2019 at 10:31:06 AM UTC-4, vince wrote: >> >> On Tuesday, September 3, 2019 at 7:25:51 AM UTC-7, Paul Levin wrote: >>> >>> Pat,I can't install the driver. I have downloaded it, but I have 2 >>>

[weewx-user] Re: WeatherFlow - any feedback regarding WeeWX

Vince Yes... aware of 3secs for Wind, and 60 for data loop. But it is interesting that the 3sec Wind kicks MQTT (that's why mentioned "looks like Davis") :P So far, and for the price point, enjoying WF. Returned both Acurite Atlas (Atlas had a UV sensor problem, which seems an unusual

[weewx-user] Re: WeatherFlow - any feedback regarding WeeWX

Pat Yes, I'm much familiar with Static Lease IP and addressed to WF. The comment was the lack of jack net port, as it is a net Hub, and I do prefer hard-wire when possible (stability, static IP, etc). Xant PS: Thanks much for Belchertown skin! Nice, elegant and clean (I crossed by other day

[weewx-user] Re: Acurite Atlas Help

On Tuesday, September 3, 2019 at 10:31:06 AM UTC-4, vince wrote: > > On Tuesday, September 3, 2019 at 7:25:51 AM UTC-7, Paul Levin wrote: >> >> Pat,I can't install the driver. I have downloaded it, but I have 2 issues. >> >> 1. after the command, install "weewx-interceptor.zip" it returns

[weewx-user] Wunderground not working.

I have weewx setup on a raspberry pi I can send data to CWOP and PWSweather but not wunderground. I know they changed the api model. I know that my password and station info are correct in the weewx conf. What I get back when I tail the non debugged log is restx: Wunderground-PWS: Failed to

[weewx-user] Re: Acurite Atlas Help

On Tuesday, September 3, 2019 at 7:25:51 AM UTC-7, Paul Levin wrote: > > Pat,I can't install the driver. I have downloaded it, but I have 2 issues. > > 1. after the command, install "weewx-interceptor.zip" it returns "missing > destination file operand" > > You're going to have to tell us the

Re: [weewx-user] Re: Changing QoS when publishing to Mosquitto through Weewx

On Tuesday, September 3, 2019 at 3:02:01 AM UTC-7, Rui Pinto wrote: > https://github.com/weewx/weewx/wiki/mqtt > The solution couldn't just be set the option retain to True? > > > You asked specifically about QOS setting. The extension doesn't seem to support setting that from what I could

[weewx-user] Re: Acurite Atlas Help

Pat,I can't install the driver. I have downloaded it, but I have 2 issues. 1. after the command, install "weewx-interceptor.zip" it returns "missing destination file operand" 2. I can't make any changes to /etc/weewx/weewx.conf file because I get permission denied errors. Any help would be

[weewx-user] Re: WeatherFlow - any feedback regarding WeeWX

On Monday, September 2, 2019 at 10:04:47 PM UTC-7, Xant wrote: > >- MQTT updates at <3secs (maybe due to wind, but looks like a Davis); >I never had MQTT turn-out that quick... besides the 60sec actual loop >update timeframe (weewx website seems much quicker than "is"; but that

[weewx-user] Re: Acurite Atlas Help

Thanks Pat. I'll try that first. -- Paul On Tuesday, September 3, 2019 at 8:06:00 AM UTC-4, Pat wrote: > > Try listen mode and see if you get any results. > > According to the documentation, Listen mode should work without installing > any other dependant software > > > On Tuesday, September 3,

[weewx-user] Re: Acurite Atlas Help

Try listen mode and see if you get any results. According to the documentation, Listen mode should work without installing any other dependant software On Tuesday, September 3, 2019 at 8:00:07 AM UTC-4, Paul Levin wrote: > > OK. Let me try that driver. Do I set this up in "listen" or "sniff"

[weewx-user] Re: WeatherFlow - any feedback regarding WeeWX

I don't have a WF, but the lack of static IP may not be an issue if your router is able to do DHCP Reservations. If you can get the MAC Address of the device, and set a DHCP Reservation for it, then the device will get the same IP every time it renews its DHCP lease. This is how I manage all

[weewx-user] Re: Belchertown skin 1.0 released!

This is a Meteostick issue (and not a skin issue). The stick reports 10 minute average wind gust, but weewx and the archive schema don't support that observation type . As a result, wind gusts aren't

Re: [weewx-user] Re: Changing QoS when publishing to Mosquitto through Weewx

Thank you for responding!! https://github.com/weewx/weewx/wiki/mqtt The solution couldn't just be set the option retain to True? Best Regards vince escreveu no dia segunda, 2/09/2019 à(s) 17:45: > On Monday, September 2, 2019 at 9:11:01 AM UTC-7, Rui Pinto wrote: >> >> I have a Davis Vantage

Re: [weewx-user] Re: MQTT Weewx authentication

Thank you for responding!! https://github.com/weewx/weewx/wiki/mqtt The solution couldn't just be set the option retain to True? Best Regards Xant escreveu no dia terça, 3/09/2019 à(s) 06:20: > > I went through MAAANY hours in this issue... and the following is what > works 4me. > > WeeWX