Hi there weewx users!
With great help with the WMR300 driver through this supportive user group
here, I run weewx since beginning of March 2018 on a ubuntu 16.04 on a
raspberry alike hardware. After a couple of weeks (only) the outside
temperature and humidity are not correctly shown anymore.
I just rebuilt my pi3 with a WDLabs piDrive ... 256gb of disk goodness ...
Yes it boots off the SD Card but it only reads the SD for boot as its
mounted to /boot ... if I had it to do over again, I'd have done the usb
boot straight to the piDrive without the Noobs/SD but it works ;)
On Mon, Apr
After my first failure I switched to a SSD.
On 4/8/2018 10:47 PM, Janez Kranjski wrote:
After SD card failure, my idea is to change the system to have less
writes to SD card.
Is this
(https://github.com/weewx/weewx/wiki/Minimize-writes-on-SD-cards)
still the simplest solution?
AFAIK, I will
I have a 4 year old WS2080 that I have been using with Weewx. The USB
seems to have died. I have reset the console a couple of time pulling the
battery. I have reinstalled Weewx (Debian 9) and I can "sometimes" read
the config, and I removed a powered hub and connected the console directly
OK, so I'm not sure what all that means, is there a problem on my end?!
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
linaro@MyServer:~$ lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass9 Hub
When your rain data show dashes on the console you probably won't have
communication between the rain sensor and the console.
This could be caused by batteries with lower voltage. The voltage might be high
enough to not trigger yet the low-battery warning.
You might try to change the location
Sorry, I forgot, the signals of the wind and rain sensors are received by the
outside temp/hygro sensor.
The outside temp/hygro sensor send these signals together with its own values
to the console.
The wind and rain sensors have a reach of 50 meters (maximum) and the
temp/hygro sensor 100
BTW - I called Ambient today and they suggested a hard reset performed by
holding the up arrow for 30-seconds. For the moment, it is reporting again.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop
Ok Rich now its ok.
El viernes, 6 de abril de 2018, 1:39:41 (UTC+2), Rich Altmaier escribió:
>
> This is my first try at an extension. This is one file to place in user
> (/usr/share/weewx/user), with info in the header for the skin.conf and
> Standard/index.html.tmpl changes to place the data
Using the revised hp1000 driver with delay of 30 and starting weewx manually I
can see all the records coming through on the terminal. I can see the process
stopping as the records just stop coming through and the cmd line returns.
Additionally no further reports are generated. I haven’t tried
Hello again,
I have been experimenting with François drivers since last Wednesday and I
have found a couple of problems:
- In the driver, the rain packet does not contain the attribute *rain*.
I have used the version from WMR100 driver and I think it is working
correctly now:
With a RaspberryPi 3 you can boot directly to a usb device cutting out the SD
card completly. The Raspberry Pi Foundation has a tutorial on how to do this.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop
Hello all and thanks in advance for any help.
Newbie to Linux so hoping you'll be kind ;-)
Have just purchased a Raspberry Pi3 and am wanting to use it with my Fine
Offset weather station running weeWX.
I have installed the software but when i use the code to check the logs i
see no reporting
1. it helps to tell us exactly what commands you have given, and with what
responses
2. you will find that you will need to have knowledge of basic unix
commands
3. make sure you have read the comments in the wiki regarding raspberry
pi, weewx and weather stations
4. get weewx running with
It was the line length
i had entered a numerical value but the wrong value its working now thanks
for your help
concentrating of the indentation and syntax i should put more thought into
the whole thing
thanks again
On Saturday, April 7, 2018 at 9:51:39 PM UTC+1, vigilancewx wrote:
>
>
16 matches
Mail list logo