Hi folks
Have a new install 4.2.10 which was connected to a Davis Vue via a Meteopi
ethernet. Managed to get the system working although the link have never
been wonderful. Yesterday morning the link stopped working completely.
On restart Weewx tries to connect and fails.
This is the output:
For 4.2.10 read 4.10.2. Oops.
Jon
On Monday, 4 September 2023 at 16:57:26 UTC+1 Jon Fear wrote:
> Hi folks
>
> Have a new install 4.2.10 which was connected to a Davis Vue via a Meteopi
> ethernet. Managed to get the system working although the link have never
> been wonderful. Yesterday
>> <https://github.com/weewx/weewx/wiki/Help!-Posting-to-weewx-user>* in
>> the wiki.
>>
>> On Mon, Sep 4, 2023 at 8:57 AM 'Jon Fear' via weewx-user <
>> weewx...@googlegroups.com> wrote:
>>
>>> Hi folks
>>>
>>> Have a new i
>From what I can see, looks promising however I think I will wait. I will
need to run two instances to capture from both the Wittboy and a Davis Vue
in the near future, I will do that once released. It will be good to be
able to compare datasets based on the same location.
Is there a time line
Hi Gary,
Ethernet cable. So much easier than wireless! No drop outs...
BW
Jon
On Thursday, 21 April 2022 at 10:09:19 UTC+1 gjr80 wrote:
> Thanks Jon and Stephen, exactly what I was looking for. One question I did
> forget to add in my original post was how is your GW2000 connected; via
>
Sorry Gary,
Yes I do have the WH40 from my WS80 set up. I retained it to do debugging
and have the ability to calibrate the Piezo RG...
Jon
On Thursday, 21 April 2022 at 14:51:22 UTC+1 Jon Fear wrote:
> Hi Gary,
>
> Ethernet cable. So much easier than wireless! No drop outs...
>
> BW
>
> Jon
Hi
Are post to this group moderated or am I on probationary moderation? I am
not seeing any of my posts regarding the new Wittboy and the potential
driver here?
Thanks
Jon
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from
;
> All well and good, but it does not always tell the moderators that there
> is something in quarantine, so a post can languish in purgatory for quite a
> while.
>
> Wish I could do something about it, but that's the way it is!
>
>
>
>
> On Tue, Apr 19, 2022 at 6
Gary,
jon@weewx:~$ sudo PYTHONPATH=/usr/share/weewx/user python3 -m api_data
--run --i
p-address=192.168.10.16
CMD_BROADCAST (12):
Sending broadcast packet 'FF FF 12 03 15' to '255.255.255.255:46000'
Received broadcast response 'FF FF 12 00
Looking good on my test server:
May 2 12:50:47 weewx weewx[2263] INFO user.gw1000: GatewayDriver: Packet
2022-05-02 12:50:47 BST (1651492247): {'dateTime': '1651492247',
'daymaxwind': '4.3', 'dayRain': '0.6', 'extraHumid1': '53', 'extraHumid2':
'56', 'extraTemp1': '19.9', 'extraTemp2':
My apologies, I should have also included the output from the syslog...
May 2 12:55:30 weewx weewx[2263] DEBUG user.gw1000: Parsed data:
{'intemp': 16.6, 'inhumid': 61, 'absbarometer': 1020.9, 'relbarometer':
1020.9, 'outtemp': 15.7, 'outhumid': 78, 'winddir': 359, 'windspeed': 1.3,
Hi Gary
Yes, I noted that. Once I finished with the works I had ongoing with Web
camera's, I googled it. Looking forward to the next iteration of the
driver...
Jon
On Thursday, 13 April 2023 at 06:57:47 UTC+1 gjr80 wrote:
> If the 'device 7B error' you refer to is to do with the Ecowitt
Is there a way to increase the update speed of the RSS feed? I would like
to make it update every 60 seconds.
I have looked at the Wiki but nothing obvious comes up, indeed google was
pointless as well!
I will send a reply to the DB post at the weekend, got a device 7B error I
am looking
Disregard. I have changed the timing of all reports.
On Wednesday, 12 April 2023 at 21:46:33 UTC+1 Jon Fear wrote:
> Is there a way to increase the update speed of the RSS feed? I would like
> to make it update every 60 seconds.
>
> I have looked at the Wiki but nothing obvious comes up, indeed
Hi
Just seen on another group a timelapse from a webcam with the weather data
embedded into the video.
Does anyone know how to do this and is there a "how-to"? I currently gather
images every 30 seconds from my webcam and create a timelapse each night
for upload to my web page.
It seems like
Hi
I am currently working with Dave of the weewx-wdc skin fame create a sensor
stats page for the skin.
Dave has a copy of my db to play with however he has noticed that the
sensor values are not being recorded frequently. He notes that the values
were recorded for a few days in January and
I have finally got XTides working and getting results on my site. The tide
heights are showing in feet however I would prefer them in Meters.
I have taken a look around under the bonnet but cannot see how to change
this. Any thoughts?
I am using the weewx-wdc skin and v4.10.2.
Thanks
Jon
--
Hi Gary
Sorry for the delay, other domestic "priorities" got in the way!
Attached are the files which I hope will help. Dave has now released the
v3.2.0 of the weewx-wdc skin which has the sensors page. Currently it is
not displaying any data. I suspect this is part of the bigger issue.
Hi Folks
Just been gifted a Vaisala WTX536 which will now become my goto device for
my weather station. I have a WS90 Wittboy with a separate rain gauge and
Temperature sensor. I also have a Davis Vue which seems to be missing the
rain side of things
So to the min part of the post, a
ion.
> Ian
> https://claydonsweather.org.uk
>
> On 16 Jan 2024, at 08:42, 'Jon Fear' via weewx-user <
> weewx...@googlegroups.com> wrote:
>
>
>
> Hi!
>
> I suspect that this will come across as rather impertinent but when will
> the DivumWX template be ready for release
Hi!
I suspect that this will come across as rather impertinent but when will
the DivumWX template be ready for release or at least Beta test?
It has shown as in closed Alpha for some time now with no obvious changes
in the code being made.
For those who do not know, check out
Indeed it was user error.
I followed the commands in the apt directory and all appears well.
Sorry folks.
On Tuesday 16 January 2024 at 10:54:08 UTC Jon Fear wrote:
> Hi Folks
>
> Pretty sure this is "user error" however after following the install
> notes: I guess the clue is "buster", Deb
Hi Folks
Pretty sure this is "user error" however after following the install notes:
I guess the clue is "buster", Deb 12 is "bookworm". I did change in the apy
config file but that did not work...
jon@weewx-new:~$ sudo apt update
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2
Hi Folks
This
one:
https://www.aliexpress.com/item/1005005779642087.html?spm=a2g0o.order_list.order_list_main.5.417c1802velQT0
Looking at integrating the sensor above into my Weewx setup.
The problem is how! As I do not (as in cannot ) code, even to save myself,
I am unsure how to do this.
Please ignore this message. I have had to rebuild my mailserver and I am
testing why I am not seeing much from groups...
Jon
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
Hi folks
It is time for the silly question to be asked.
I have a Vaisala WXT536 which is well supported under Weather Display
whereas the support is limited here under weewx. Not a criticism given it
is such a unique high value device which will have limited appeal.
Is there a way of taking
gt;
>> Nice station.
>>
>> Did you try Matthew Wall's driver?
>> https://github.com/matthewwall/weewx-wxt5x0
>>
>> Also, if it has an MQTT interface, you could integrate it into WeeWX that
>> way.
>>
>> On Sat, Mar 9, 2024 at 6:42
On Sat, Mar 9, 2024 at 9:50 AM Tom Keffer wrote:
>>
>>> Nice station.
>>>
>>> Did you try Matthew Wall's driver?
>>> https://github.com/matthewwall/weewx-wxt5x0
>>>
>>> Also, if it has an MQTT interface, you could integrate it into
Hi Ben
I was sneaky, I moved the weewx directories to the NAS and then created the
symbolic link in the place of it. I am lucky in that I have a production
system on 4.10.0 whilst I build my 5.0.2 system. It is really important to
get the permissions right otherwise it will be a disaster...!
I am doing something similar using my NAS.
I have mounted the NAS and then created symbolic links to the appropriately
named folders or directories on the NAS. When mounting the NAS, I needed to
make sure that the permissions were correct for weewx which was eventually
quite simple to achieve.
OK so no one is willing to admit trying this before!
As I am no coder and do not have time nor the intelligence to write my own
code, I wondered yesterday whether AI could help...!
The result is now in my github but does not work and frankly even with
debug set to one, I cannot see why it does
31 matches
Mail list logo
