Re: [weewx-user] Belchertown skin for weewx now available!

Hopefully all of your configurations are in weewx.conf. If so you can just download it and install it like before with wee_extension. On Wed, Aug 22, 2018, 5:08 PM Colin Larsen wrote: > What's the best way to update Pat? > > On Thu, 23 Aug 2018, 08:29 Pat, wrote: > >> Just released 0.2. Give

Re: [weewx-user] Re: MQTT with Belchertown skin - errors, No module named mqtt

Understood and no worries, thanks! On Sun, Aug 26, 2018, 1:05 PM mwall wrote: > On Sunday, August 26, 2018 at 12:49:25 PM UTC-4, Pat wrote: >> >> On an unrelated note, I have a pull request against your meteostick >> driver. Anything more I need to do with that? >> > > i see it. i'm slowly

Re: [weewx-user] Re: Belchertown skin for weewx now available!

How did you install weewx? A package manager like apt or yum or with install.py? On Tue, Aug 28, 2018, 12:16 PM G Hammer wrote: > The install set that differently, I just changed it to the example with no > difference. > Here's what is in the config > # [[Belchertown]] > #HTML_ROOT =

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Good catch! I wonder if there's a way around that on upgrades. On Tue, Aug 28, 2018, 5:42 PM Colin Larsen wrote: > Something to watch - the 'about.inc' is also overwritten, so if you have > lots of goodies modified in that it will go back to the vanilla install > page when you do an update :)

Re: [weewx-user] Re: How do I correct?

1284 > john@OptiPlex ~ $ sudo service mysqld status > mysqld: unrecognized service > john@OptiPlex ~ $ sudo service mariadb status > mariadb: unrecognized service > > > On 8/19/2018 9:20 AM, Pat O'Brien wrote: > > I don’t have a raspberry pi with mysql installed. Try sudo se

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Woke up wondering if this is the classic case of reusing variable names. going to try to replicate it today on a Raspberry Pi. On Fri, Aug 24, 2018, 7:22 AM gjr80 wrote: > Can't comment further without seeing a good couple of archive periods of a > log extract that includes the full error

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Gary, I noticed the SLE running multiple times and I figured it was because it looks through each one every time. Does it make sense for me to consolidate all of my Belchertown SLE into one function. And maybe even consolidate all of the highcharts into one? Then instead of 16 runs it'll only be

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Yes I added a version number which shows up in the log when the skin report is generated. I was able to fix a couple of items you were asking for. Hope they are good to go now. On Thu, Aug 30, 2018, 2:43 PM David Hathaway wrote: > Pat, > > I am installing now to

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I wouldn't have named it after my site if it didn't look like it :) Installing and uninstalling is easy. No harm in trying it if you are curious. It won't break anything with weewx. On Sun, Sep 2, 2018, 6:38 AM Praveen Chandrasekaran wrote: > Does anyone here who has used the skin have a

Re: [weewx-user] Re: Belchertown skin for weewx now available!

You can try to install mosquito and get it going, or to test the mqtt capability quickly, you can use the broker in the readme on GitHub. On Sun, Sep 2, 2018, 6:58 AM Praveen Chandrasekaran wrote: > Thanks. One query. I run weewx on my pi. I FTP currently to another server > where my website

Re: [weewx-user] Re: Belchertown skin for weewx now available!

How are you transferring it? The skin doesn't ftp. Are you Using the ftp extension? Not sure on the options of that. On Sat, Sep 8, 2018, 10:59 AM Praveen Chandrasekaran wrote: > Another suggestion > > I was looking at the size of belchertown skin output. Significant partof > it is due to

RE: [weewx-user] Re: Belchertown skin for weewx now available!

Modify your station_url to have the http:// prefix. From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On Behalf Of Dave Webb KB1PVH Sent: Thursday, September 06, 2018 1:28 PM To: weewx-user@googlegroups.com Subject: Re: [weewx-user] Re: Belchertown skin for weewx now

Re: [weewx-user] Re: Earthquake still having problems (for me)

Interesting. Urllib2 should follow redirect to https I hadn't tried with curl, but if you try with curl -L, what happens? It should follow the https redirect. Pat On Mon, Sep 10, 2018, 12:14 PM Thomas Keffer wrote: > On Mon, Sep 10, 2018 at 9:11 AM Pat wrote: > >> USGS will auto-promote the

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Nope I noticed it too. Should be fixed in the next version! I'll let you know when it's time to upgrade On Wed, Aug 29, 2018, 7:00 PM John Clark wrote: > Don't know if I am the only one who noticed this, (I doubt it) but the > "Graph Time" seems to be UTC, while all other times seem to be in

RE: [weewx-user] Re: Belchertown skin for weewx now available!

As far as I know, my skin isn’t specifying a query for wind. A search on the repo in GitHub shows that the columns I query are “windSpeed, windGust”, etc. Anything for “wind” is done through a built in weewx call for $day.wind, $week.wind, etc. Where do you see this query?

RE: [weewx-user] Re: Belchertown skin for weewx now available!

Ok, looks good. Did you make your configuration changes in weewx.conf then restart weewx after doing that? From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On Behalf Of Thomas Sch Sent: Thursday, October 04, 2018 2:50 PM To: weewx-user Subject: Re: [weewx-user] Re:

RE: [weewx-user] Re: Belchertown skin for weewx now available!

Setup debug = 1 in weewx.conf then restart weewx and see what’s in the log file? Typically /var/log/syslog From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On Behalf Of Thomas Sch Sent: Thursday, October 04, 2018 3:28 PM To: weewx-user Subject: Re: [weewx-user]

Re: [weewx-user] How can I display daily highcharts in metric?

Sure thing. Did you restart weewx after making the changes? On Fri, Oct 5, 2018, 8:08 AM Thomas Sch wrote: > I read this on on the GitHub Page and changed it in weewx.conf but there > is the same issue :) may you can look the config-files in the attachment > later :) > > Am Freitag, 5. Oktober

Re: [weewx-user] How can I display daily highcharts in metric?

Hi there, I'm on mobile phone so pardon the brevity. If you go to the GitHub page where you downloaded the release file. On the main page about halfway down you should see how to change it to metric values. On Fri, Oct 5, 2018, 5:29 AM Thomas Sch wrote: > So like many others before me, I will

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I'm replying on mobile so hopefully this is helpful... How did you install the zip? Using wee_extension like in the GitHub readme? Do you have a [Belchertown] and a [Highcharts_Belchertown] in your weewx.conf? On Sun, Sep 30, 2018, 9:36 AM wrote: > however, none of the graphs seem to be

Re: [weewx-user] Re: Belchertown skin for weewx now available!

comes before the Belchertown content, but not sure if > that will make any difference. > > David. > > On Sun, 30 Sep 2018 at 14:44, Pat O'Brien wrote: > >> I'm replying on mobile so hopefully this is helpful... >> >> How did you install the zip? Using wee_extension

RE: [weewx-user] Re: Belchertown skin for weewx now available!

group_pressure = hPa group_rain = mm group_rainrate = mm_per_hour group_speed = meter-per_second group_speed2 = meter_per_second2 group_temperature = degree_C On Sun, 30 Sep 2018 at 15:22, Pat O'Brien mailto:p

RE: [weewx-user] Re: Belchertown skin for weewx now available!

Subject: Re: [weewx-user] Re: Belchertown skin for weewx now available! Site is at www.djhindley.com/weather <http://www.djhindley.com/weather> I will check syslog. Yes, the json directory has index.html and some .json files. On Sun, 30 Sep 2018 at 15:30, Pat O'Brien ma

Re: [weewx-user] Re: Belchertown skin for weewx now available!

e also the MQTT data is not available. Not sure if some > issue from broker end. > > On Wed, 10 Oct 2018 at 18:34, Pat O'Brien wrote: > >> Port is what the websocket port is as defined on front page of >> http://test.mosquitto.org >> >> On Wed, Oct 10, 2018, 1:5

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I'm traveling and offline for a while. Help and communicate limited But your topic is not right. Change to : weather/IBANGALO9/loop You rarely ever want to use # On Wed, Oct 10, 2018, 1:42 PM Praveen Chandrasekaran wrote: > Hi Pat, > > Everything was fine for me till recently. Since last few

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Port is what the websocket port is as defined on front page of http://test.mosquitto.org On Wed, Oct 10, 2018, 1:50 PM Praveen Chandrasekaran wrote: > Port should be 8080 right? I used settings from Colin. > > On Wed, 10 Oct 2018 at 18:14, Pat O'Brien wrote: > >> I'm tra

RE: [weewx-user] Re: Belchertown skin for weewx now available!

Couple other observations. Looks like all the json/ files are missing on the website. Day.json, week.json, month.json and year.json all 404 not found. And your windy map shows me my location. If you’ve updated it to show your location, there are actually 2 spots for your lat/lon that need

RE: [weewx-user] Re: Belchertown skin for weewx now available!

To submit to? Check the readme for the mqtt extension. It's something like mqtt://user:pass@broker -Original Message- From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On Behalf Of Praveen Chandrasekaran Sent: Sunday, September 02, 2018 10:43 AM To: weewx-user

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Interesting... Check this link as it is the official document. http://www.weewx.com/docs/customizing.htm Then search for "day.wind". You'll see the differences. On Fri, Aug 31, 2018, 11:57 AM David Hathaway wrote: > Reckoned it was easy enough to try, so I changed the records code to > > >

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I'm on mobile, so I read this again. Maybe the difference is year.wind as opposed to day? On Fri, Aug 31, 2018, 12:12 PM Pat O'Brien wrote: > Interesting... Check this link as it is the official document. > > http://www.weewx.com/docs/customizing.htm > > Then search for "d

RE: [weewx-user] Belchertown skin for weewx now available!

m to work so far. I'm guessing that 'Visibility' also comes from Darksky? Visibility 3.84 miles On Thu, Aug 23, 2018 at 10:34 AM Pat O'Brien mailto:p...@obrienphoto.net> > wrote: Hopefully all of your configurations are in weewx.conf. If so you can just download it and insta

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Did you try from github or the attachment? The GitHub is newer. On Mon, Sep 3, 2018, 11:18 AM Juan Antonio Mosquera < juanantoniomosqu...@juanantoniomosquera.com> wrote: > Hi > > My DB... 4 years. > Sqlite > Lastest version of weewx (3.8.2). > > I try now with new

Re: [weewx-user] Re: Belchertown skin for weewx now available!

My guess is once the skin gets stable updates will be less and less. I think we are getting close. On Mon, Sep 3, 2018, 5:12 PM Colin Larsen wrote: > H, not helpful. I was thinking of building myself a script to copy > files I know I've customised and run that before upgrades. But again

Re: [weewx-user] Re: Belchertown skin for weewx now available!

I guess the good news is that the changes I made today worked. I'll include those in the next update. On Mon, Sep 3, 2018, 5:06 PM Pat wrote: > I just asked that question > . > Seems the install.py has 1 job, and

Re: [weewx-user] Re: Belchertown skin for weewx now available!

Hmm. My skin only is just presentation. Shouldn't block data from station. What are errors in log? On Mon, Sep 3, 2018, 5:24 PM Juan Antonio Mosquera < juanantoniomosqu...@juanantoniomosquera.com> wrote: > Ok... do it. > > Now... no errors... but... > > not collect data from station with your

Re: [weewx-user] Re: use Weewx on raspberry

Yes you can send me a private mail. I can't look at it for a few hours. Maybe you can leave it there for a day or so? Send me a login and your home ip in private mail. On Tue, Jan 1, 2019, 11:18 AM Patrick Tranchant wrote: > I am ready Pat > > > On Saturday, December 8, 2018 at 3:40:43 PM

RE: [weewx-user] Re: Belchertown skin 0.9 now available

That’s a darksky setting, not the skin. The skin shows what DarkSky is giving it. You’ll need to contact them if you need more clarity on the observations. From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On Behalf Of Adnan Mumtaz Sent: Monday, March 18, 2019 2:39

Re: [weewx-user] Re: Belchertown Skin version: 0.9rc6 crashed when used with non-standard database name

Luc, Gary good info, great insight. Thanks for that... It all makes sense and wasn't something I had considered previously. I'm on holiday today, but Luc if you want to submit a pull request that would be great. Otherwise I can merge this myself after some testing tomorrow. On Mon, Feb 18,

Re: [weewx-user] Re: Belchertown Skin 0.8.2 Released

Is the belchertown root URL set? On Fri, Feb 15, 2019, 5:28 PM Joe Spears I installed the Belchertown skin and I get none of the graphs. The > weather data and report data show just fine. Looking at my log I see that > Highcharts runs but nothing is being copied for every instance of >

Re: [weewx-user] Re: Belchertown skin 0.9 now available

I am on mobile right now but I can see that your locale is set to United States English based on your weewx_data.json file on your site. You can either change the locale on your server to be Spanish (preferred) or change the skin.conf locale setting to not be auto and use es_ES.UTF-8. Then restart

Re: [weewx-user] Re: Belchertown skin 1.0 released!

Yes, your archive interval isn't 300 which is the default gapsize for the charts.. So you will need to change the gapsize setting in the graphs.conf.example (or graphs.conf) to match your weewx.conf archive_interval in milliseconds. Sent from mobile On Sun, Jun 9, 2019, 11:52 AM Chris P

Re: [weewx-user] Re: Belchertown Solar Radiation Graph and High Chart Questions

Haven't done anything extra. Sent from mobile On Sat, Jun 22, 2019, 9:54 AM gjr80 wrote: > On Saturday, 22 June 2019 23:04:07 UTC+10, Pat wrote: >> >> > Where is the pyephem calculation for theoretical max radiation >> observation being done? I would like to get the plot data to agree. >> >>

Re: [weewx-user] Re: Full day highcharts question

Can you try to reinstall the whole development skin and restart weewx? On Wed, Jun 24, 2020, 5:03 PM Manfred Maier wrote: > Didn't work :( > > I don't understand this error. The 'forecast_provider' is in my skin.conf > and the weewx.conf: > > # Forecast defaults > >

Re: [weewx-user] Re: Full day highcharts question

Wow! I'm not sure why you're getting that error either. Something is missing somewhere On Wed, Jun 24, 2020, 5:14 PM Manfred Maier wrote: > I'll have to try that tomorrow. > My skin installation includes a number of individual adaptions (e.g. pi > page, individual website widget, horizontal

Re: [weewx-user] Re: Full day highcharts question

I'll have to look into it for the day charts. Like I said I'm not sure why the year charts are doing it but I haven't had time to look at it yet. On Sun, Jun 14, 2020, 2:43 PM Manfred Maier wrote: > > This new behavior (ie. showing the entire year / month on the x-axis) has > been the main

Re: [weewx-user] Re: Full day highcharts question

Update your skins.conf to latest version too On Wed, Jun 24, 2020, 4:28 PM Manfred Maier wrote: > > Hi Pat, > apologies, it's me again. > > Yesterday (and today) I've just copied the new belchertown.py in my user > folder. > Now I've seen that i get a two error messages in my syslog. > > The

Re: [weewx-user] Re: Belchertown Graphs - not showing

Belchertown skin 1.1 is released. Try upgrading? On Fri, Jun 5, 2020, 5:38 PM Mike Wren wrote: > The one weather station I upgraded to weewx 4.1.1 also had the belchertown > skin 1.0.1 stop working for graphs and MQTT updates. > > here's the website: https://websterweather.com > > This is the

Re: [weewx-user] Question on heat index

You don't have to modify any code, just change the calculation formula by setting this option in weewx.conf Look for the [StdWXCalculate] section, then beneath add [[WXXTypes]] [[[heatindex]]] algorithm = old That put it back to the "old" method for me where heat index

Re: [weewx-user] Belchertown AQI error from Aeris weather

I think this is being actively developed in this thread on the skin's GitHub page. Please raise your issue there and the folks from the community can try to fix it as well On Tuesday, March 2, 2021 at 6:33:26 AM UTC-5 gert.a...@gmail.com

[weewx-user] Question on heat index

I thought heat index wasn't calculated unless the temperature was over 80F? Today it's about 49 F and I'm seeing heat index in my charts (which is reporting lower than temperature - I thought that was wind chill?). I don't recall seeing it before at this temperature range. I just want to make

[weewx-user] Re: Question on heat index

Thanks Gary! I've got some catching up to do it seems On Wednesday, February 24, 2021 at 3:54:21 PM UTC-5 gjr80 wrote: > Pat, > > v4.2.0 saw a new heatindex formula implemented, refer issue 601 > . The new formula gives some > results in some

[weewx-user] Belchertown skin & AerisWeather correction

Hi folks, if you're using the Belchertown skin: I was contacted by AerisWeather today and they asked for me to update the company name in the skin to AerisWeather (one word, no space, capital A, capital W). If you have a mis-spelling of their company name in your skin under your credits

Re: [weewx-user] Log windSpeed as 0 instead of null

No I mean windSpeed. I saw the force_null for wind direction. For some reason I have null for wind speed, when I'm thinking it was 0. On Fri, Feb 12, 2021, 4:47 PM Tom Keffer wrote: > If there is no wind, windSpeed is always stored as 0, never null. > > Or, do you mean wind direction? > > On