[WISPA] Sometimes you just need to know you know

I did an install up on the mountains today... It's just about a half hour's drive from my workshop, almost an hour's drive from home... Although this is a very remote AP, there ARE a few homes nearby. And one of those had called and we're doing the install. So, we get her IMAC hooked up and

Re: [WISPA] Sometimes you just need to know you know

In-Reply-To: [EMAIL PROTECTED] Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-RBL-Warning: SPAMHEADERS: This E-mail has headers consistent with spam [480e]. X-Declude-Sender: [EMAIL PROTECTED] [66.232.162.254] X-Declude-Spoolname:

Re: [WISPA] Wireless AP w/o router

We usually get the Netgear WGR614 - sometimes refurbished. If you disable DHCP it's essentially a Wireless AP bridge like what you're wanting. You can usually pick these up for around $15-20 online, depending on bulk. I think we got some in bulk for about $16 each and their wired counterpart

Re: [WISPA] Wireless AP w/o router

Thanks to all for the replies.  I had pretty much determined that using a SOHO router but not the WAN port was going to be the answer, so that is what we will do.  I was hoping to save the customer some $$$, but alas, not to be. Scott Reed Owner NewWays Wireless Networking

Re: [WISPA] Sometimes you just need to know you know

Back in our dialup days, one way to help speed up those connections was to limit their temp Internet files to 1mb and upgrade one or more of the following; memory, video card, especially if it was shared memory, HDD and obviously the modem. Other things such as HDD fragmentation and

[WISPA] WLM54G

Does anybody have any experience good/bad with the WLM54G cards? Thanks Chris -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

RE: [WISPA] WLM54G

I only have one in production, but it appears to be working just fine. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chris cooper Sent: Tuesday, August 22, 2006 8:53 AM To: 'WISPA General List' Subject: [WISPA] WLM54G Does anybody have any

[WISPA] Customer needing connectivity

Hi all, I have a customer looking for wholesale bandwidth (T1 or better) in the following locations: Clifton, TX Muleshoe, TX Memphis, TX Crystal Beach, TX Corning, OH Kinderhook IL Orcus Island, WA Anyone that can help, please contact me offlist. Thanks! Matt Larsen [EMAIL PROTECTED] --

Re: [WISPA] Sometimes you just need to know you know

I just didn't realize that her old IMAC couldn't sustain more than 80KB/sec downloads.No kidding. The hard drive thrashed visciously and that's all it could do. No, you see, the problem isn't that it's an iMac, the problem is that it's still running MacOS. I've got an old Revision A (the

Re: [WISPA] Sometimes you just need to know you know

The 4800 or 5400 RPM 5-10[minute] seek times on the old drives in those does not help either! :) I had several labs of those things when I was managing school districts. They are great machines. You can call thank apple for driving the cost of USB, and in some cases wireless, down to

[WISPA] Looking forward to hear about Ken's network

Saw this on ISP Planet: http://www.isp-planet.com/fixed_wireless/business/2006/dialup_2.0.html ~V~ StLBroadband.com -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/

[WISPA] Managing CPE in routed network

Ok, this may be a simple question, but I'm trying tofigure the best way to do this. My wireless network is currently all bridged with three different POP's (all statically assigned private IP's). I'm getting requests forpublic IP addresses and as I add more clients, I feel like I'm really

Re: [WISPA] Managing CPE in routed network

In my network I assign a private IP to the CPE and a 'similar' IP to the customer. For instance if I assign 10.1.1.100 to the customer then I assigned 10.101.1.100 to the CPE. Easy to remember the CPE address given the customers IP. Each AP gets it's own class C. I then do 1 to 1 NAT at

RE: [WISPA] Managing CPE in routed network

In the end I feel routed is better because you grow, a bridged network will get loud (lots of overhead traffic). You manage the CPE in a routed network just as you do now. What maybe you see is the difference between true routes and NAT routes. With true routes there is a path to and

Re: [WISPA] Managing CPE in routed network

That is correct on the Tranzeo AP's, but, I'm considering replacing the TR-6000's I have with RB532's to give me more flexibility, and give true bandwidth shaping at the AP instead of at my headend. - Original Message - From: Mark McElvy To: WISPA General List

RE: [WISPA] Managing CPE in routed network

I am currently using WRAP/StarOS for APs, routing back to a StarOS Head end router that is doing the shaping. I am a fan of centralized administration, I use MAC/Radius Auth for the SOS APs, but Atheros radios do not support this. Mark McElvy AccuBak Data Systems, Inc. Salem, MO