-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Butch Evans
Sent: Wednesday, June 04, 2008 11:57 PM
To: WISPA General List
Subject: Re: [WISPA] 3650 XR3 locations
On Wed, 4 Jun 2008, Kyle Duren wrote:
*Response: *
Since the device is already certified
, June 04, 2008 11:57 PM
To: WISPA General List
Subject: Re: [WISPA] 3650 XR3 locations
On Wed, 4 Jun 2008, Kyle Duren wrote:
*Response: *
Since the device is already certified, it can be installed into a
final basestation without further approval, as long as the FCCID
label
General List
Subject: Re: [WISPA] 3650 XR3 locations
On Wed, 4 Jun 2008, Kyle Duren wrote:
*Response: *
Since the device is already certified, it can be installed into a
final basestation without further approval, as long as the FCCID
label is attached on the outside
with a low-gain
rubber-duck omni.
Tom Sharples
Qorvus Systems, Inc.
- Original Message -
From: Kurt Fankhauser [EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Thursday, June 05, 2008 6:48 AM
Subject: Re: [WISPA] 3650 XR3 locations
Exactly, with that attitude from the FCC
tested with a low-gain
rubber-duck omni.
Tom Sharples
Qorvus Systems, Inc.
- Original Message -
From: Kurt Fankhauser [EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Thursday, June 05, 2008 6:48 AM
Subject: Re: [WISPA] 3650 XR3 locations
Exactly
tested with a
low-gain
rubber-duck omni.
Tom Sharples
Qorvus Systems, Inc.
- Original Message -
From: Kurt Fankhauser [EMAIL PROTECTED]
To: 'WISPA General List' wireless@wispa.org
Sent: Thursday, June 05, 2008 6:48 AM
Subject: Re: [WISPA] 3650 XR3 locations
Exactly
of antenna. I have been through this several times.
- Original Message -
From: Jack Unger [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Thursday, June 05, 2008 12:55 PM
Subject: Re: [WISPA] 3650 XR3 locations
Right. The WISP then has the option of sending
I had a feeling this would unleash a can of worms.
I'm the one who registered the locations. My first location (my office
rooftop) was done purely as an academic exercise to see what exactly was
required. I had hoped the FCC would come back and say, you need to do
X Y and Z before this is
... Not optimized and not properly channel filtered
and limited.
insert witty tagline here
- Original Message -
From: Randy Cosby [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, June 04, 2008 9:12 AM
Subject: Re: [WISPA] 3650 XR3
... Not optimized and not properly channel filtered
and limited.
insert witty tagline here
- Original Message -
From: Randy Cosby [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, June 04, 2008 9:12 AM
Subject: Re: [WISPA] 3650 XR3
Does that apply to part 15 modular approval as well for SR2/SR5/XR2/XR5?
- Original Message -
From: [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, June 04, 2008 12:33 PM
Subject: Re: [WISPA] 3650 XR3 locations (was: Rapid Link Launches WiMax)
I've been
-
From: Randy Cosby [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, June 04, 2008 9:12 AM
Subject: Re: [WISPA] 3650 XR3 locations (was: Rapid Link Launches WiMax)
I had a feeling this would unleash a can of worms.
I'm the one who registered
Yes.
insert witty tagline here
- Original Message -
From: Doug Ratcliffe [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, June 04, 2008 9:44 AM
Subject: Re: [WISPA] 3650 XR3 locations (was: Rapid Link Launches WiMax
- Original Message -
From: Leon D. Zetekoff, NCE [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Wednesday, June 04, 2008 11:16 AM
Subject: Re: [WISPA] 3650 XR3 locations
* Randy Cosby wrote, On 6/4/2008 12:36 PM:
Thanks for the clarification on the cards. Any hints on getting
I have been working on this a little bit with Jack and some other
people, and we had a few questions submitted directly to the FCC, to
verify some of these exact questions, here are there responses:
*Inquiry:*
I am trying to fully understand the procedures for getting a radio
device certified
On Wed, 4 Jun 2008, Kyle Duren wrote:
*Response: *
Since the device is already certified, it can be installed into a
final basestation without further approval, as long as the FCCID
label is attached on the outside of the final product. However, if
your company wishes to obtain it's own FCC
16 matches
Mail list logo
