You could just use an APC system... might cost more but less tinkering to
do. You can find good deals on eBay and other places... just buy new
batteries
1400 series UPS's were our friend for Mesa's small sites.
Daniel White
3-dB Networks
-Original Message-
From:
And how are you charging the batteries?
Tom DeReggi
RapidDSL Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: Brian Rohrbacher [EMAIL PROTECTED]
To: Conversations over a new WISP Trade Organization wireless@wispa.org
Sent: Tuesday, August 29, 2006 4:37 PM
Bring the charger from home.
Something comparable to this with a deep cell setting.
http://www.qvc.com/asp/frameset.asp?aol_refer=falsemsn_refer=falsenest=http://www.qvc.com/scripts/detail.dll?item=V48949!tpl=DETAIL!ref=GBAref=GBAcm_ven=
Direct commercial inquiries to purchasing at neofast dot net
- Original Message -
From: Marlon K. Schafer (509) 982-2181 [EMAIL PROTECTED]
To: WISPA General List wireless@wispa.org
Sent: Friday, September 01, 2006 9:40 AM
Subject: Re: [WISPA] Battery Backup
I'm tempted to do something like
] On
Behalf Of Rick Harnish
Sent: Friday, September 01, 2006 10:14 AM
To: 'WISPA General List'
Subject: RE: [WISPA] Battery Backup
Brian,
We made an inexpensive Rebootable UPS out of an APC BH500NET. It has a web
interface to reboot the system and Ethernet ports to connect to. It was
designed
Brad -
What model hardware do you have, and what software version?
Thanks,
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brad Belton
Sent: Friday, September 01, 2006 12:30 PM
To: 'WISPA General List'
Subject: RE: [WISPA] Battery Backup
I'm tempted to do something like that but not worry about the transfer
switch. I'd just run off of 12 vdc all of the time. No power issues from
outside that way!
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage)Consulting
List'
Subject: RE: [WISPA] Battery Backup
Brad -
What model hardware do you have, and what software version?
Thanks,
-Russ
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Brad Belton
Sent: Friday, September 01, 2006 12:30 PM
To: 'WISPA General List
Those are some great pics Rick, Thanks!
What is that other board you have in there? POE switch?
Mac
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Rick Harnish
Sent: Friday, September 01, 2006 10:14 AM
To: 'WISPA General List'
Subject: RE: [WISPA
I use an APC SU700NET with an AP9617 SNMP card. In the firmware version
that I have (SNMP card, that is), there are 151 'events' for which you can
specify actions. You can set severity (Severe, Warning, Informational) on
each event. Each severity can be configured to trigger alarms (Syslog,
] On
Behalf Of Mac Dearman
Sent: Friday, September 01, 2006 11:52 AM
To: 'WISPA General List'
Subject: RE: [WISPA] Battery Backup
Those are some great pics Rick, Thanks!
What is that other board you have in there? POE switch?
Mac
-Original Message-
From: [EMAIL PROTECTED] [mailto
, September 01, 2006 12:50 PM
To: 'WISPA General List'
Subject: RE: [WISPA] Battery Backup
Hello Russ,
I believe the same as Rick...APC BH500NET. Nice little units, but I wish
they had an Ethernet switch built-in rather than just a port. In all
honesty I don't think I'd want production traffic passing
I like the smurf tube. Very cool.
George
Brian Rohrbacher wrote:
I need help making a battery backup system. I attached pictures of what
I have. It's a power inverter, auto transfer switch, Air Conditioner
type disconnect, and a deep cycle marine battery. I want to do
something like this
General List'
Subject: RE: [WISPA] Battery Backup
Hello Russ,
I believe the same as Rick...APC BH500NET. Nice little units, but I wish
they had an Ethernet switch built-in rather than just a port. In all
honesty I don't think I'd want production traffic passing through a UPS
anyway, so the single port
] On
Behalf Of Russ Kreigh
Sent: Friday, September 01, 2006 12:28 PM
To: 'WISPA General List'
Subject: RE: [WISPA] Battery Backup
Ah, we are running a newer Web Firmware.. Don't suppose you have the old
firmware?
Model: APC Back-UPS HS 500
Firmware revision: l1
Web firmware revision: l4
-Russ
on this later today.
Best,
Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Friday, September 01, 2006 12:55 PM
To: WISPA General List
Subject: Re: [WISPA] Battery Backup
Are you able to enter a full IP address set into the unit
16 matches
Mail list logo