r products @: www.nighthawksystems.com.
Best regards,
Jeff Bell
Vice President
Nighthawk Systems, Inc.
8200 East Pacific Place
Ste 204
Denver, CO 80231
720-470-4090
Message: 1
Date: Thu, 10 Nov 2005 09:36:45 -0800
From: "Marlon K. Schafer (509) 982-2181" <[EMAIL PROTECTED]&
Thursday, November 10, 2005 12:44 AM
Subject: Re: [WISPA] IP based Remote Reboot
DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop it
back down to 5 volts at the other end. They list for about $25, so I
wouldn't think it should cost you too much to do.
John
Blair Davi
: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "'WISPA General List'"
Sent: Wednesday, November 09, 2005 8:06 PM
Subject: RE: [WISPA] IP based Remote Reboot
Blair
I think this will do what you need tell them Tony front Demarc sent you:
http://www.remotedatacom.com
;
To: "WISPA General List"
Sent: Tuesday, November 08, 2005 8:24 AM
Subject: Re: [WISPA] IP based Remote Reboot
These are great units, its what we use also at our cell sites. You can get
them for $250 for 8 port, in qty 5.
These are well worth it for cell sites.
What I'd like to
Right, my point here is that you don't need to do anything to make your
system work with 48 volts. We just need to acquire a 48-12 volt convertor.
John
Blair Davis wrote:
Not quite. The D-Link POE kit has a 48VDC power block with a DC-DC
step down unit at the other end.
$25 doesn't sound t
We get them from D&H for less than $30 but I don't remember the exact
price off hand.
--
A. Huppenthal wrote:
That's a good price. I paid nearly $50 each.
John Thomas wrote:
Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12
volts out the back.
John
A. Huppenthal wro
Not quite. The D-Link POE kit has a 48VDC power block with a DC-DC step
down unit at the other end.
$25 doesn't sound too bad until you see the current hardware budget. :(
--
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48 across the wire and
drop it back down to 5 volts
That's a good price. I paid nearly $50 each.
John Thomas wrote:
Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12
volts out the back.
John
A. Huppenthal wrote:
let me know where you get them for $25
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48 ac
Actually, Online Micro has the DWL-P200 for $30 and it can do 5 or 12
volts out the back.
John
A. Huppenthal wrote:
let me know where you get them for $25
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48 across the wire and
drop it back down to 5 volts at the other end. Th
OK, I exaggerated, compuplus has them for $36 each. My point was that he
only needs half the circuit. Now that I think of it, I guess that as
long as his device takes 5-12 volts in, you would only need a power
reducer to use 48 volts up. It's a lot easir to get 48 volts to go 300
feet than it i
let me know where you get them for $25
John Thomas wrote:
DLinks POE kits take 5 volts, bump it up to 48 across the wire and
drop it back down to 5 volts at the other end. They list for about
$25, so I wouldn't think it should cost you too much to do.
John
Blair Davis wrote:
John, I have c
DLinks POE kits take 5 volts, bump it up to 48 across the wire and drop
it back down to 5 volts at the other end. They list for about $25, so I
wouldn't think it should cost you too much to do.
John
Blair Davis wrote:
John, I have considered it. My only concern was that it might
increase th
Yes, Blair
That does sound good, let us all know. I second the vote for DC reboot
devices.
Original message
>Date: Wed, 9 Nov 2005 14:49:43 -0500
>From: "Tom DeReggi" <[EMAIL PROTECTED]>
>Subject: Re: [WISPA] IP based Remote Reboot
>To: "WISPA G
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Tuesday, November 08, 2005 11:22 PM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do what
I need and fit in the space allowed
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Tuesday, November 08, 2005 11:22 PM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do what
I need and fit in the space allowed
o: <[EMAIL PROTECTED]>; "WISPA General List"
Sent: Wednesday, November 09, 2005 11:14 AM
Subject: Re: [WISPA] IP based Remote Reboot
Blair, it might be a good idea to allow for 48 v powering, since that is
802.3af POE standard. This way your device could be mounted away from
the Rad
John, I have considered it. My only concern was that it might increase
the final cost. I will take another look at it.
Maybe where it can 'vampire' it's power off one of the switched circuits
if the switched circuit is 48V POE?
The only bad thing about that is it will still require a 10/100
Blair, it might be a good idea to allow for 48 v powering, since that is
802.3af POE standard. This way your device could be mounted away from
the Radio if one so chose to.
John
Blair Davis wrote:
Well, I guess there is no reasonably priced unit out there that will
do what I need and fit in
5 12:22 AM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do
what I need and fit in the space allowed.
The comments on the list have shown me that there may be a demand for a
unit like this. I have decide
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blair Davis
Sent: Wednesday, November 09, 2005 12:22 AM
To: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Well, I guess there is no reasonably priced unit out there that will do
what I need and fit in the space all
Well, I guess there is no reasonably priced unit out there that will do
what I need and fit in the space allowed.
The comments on the list have shown me that there may be a demand for a
unit like this. I have decided to build my own. I have also decided to
make it available to others who mig
less, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: "Chuck Profito" <[EMAIL PROTECTED]>
To: "WISPA General List"
Sent: Monday, November 07, 2005 11:06 PM
Subject: Re: [WISPA] IP based Remote Reboot
Try this, all our towers have this installed
[EMAIL PROTECTED]>
To: "WISPA General List"
Sent: Monday, November 07, 2005 10:27 PM
Subject: Re: [WISPA] IP based Remote Reboot
A lot of things here that I have seen, some I have not. Some I use
already.
Thanks for the ideas.
However, the main issue is space..
The box that a
Ah got it. Ok that's stupid, lol.
John Buwa
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of Blair Davis
> Sent: Monday, November 07, 2005 11:00 PM
> To: WISPA General List
> Subject: Re: [WISPA] IP based Remote Reboot
>
TED]>
To: "WISPA General List"
Sent: Monday, November 07, 2005 7:24 PM
Subject: Re: [WISPA] IP based Remote Reboot
Thanks thats good to know. Since we don't run DHCP anywhere.
Based on that, probably only good as a home unit, thats behind a home
gateway w/ DHCP.
Tom DeRegg
]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of G.Villarini
Sent: Monday, November 07, 2005 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Ae
m: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of G.Villarini
> Sent: Monday, November 07, 2005 4:04 PM
> To: 'WISPA General List'
> Subject: RE: [WISPA] IP based Remote Reboot
>
> http://www.apcc.com/products/family/index.cfm?id=3
>
> Gino A. Vi
vember 07, 2005 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Original Message-
From: [E
; <[EMAIL PROTECTED]>
To: "'WISPA General List'"
Sent: Monday, November 07, 2005 7:59 PM
Subject: RE: [WISPA] IP based Remote Reboot
We have a couple of them in our office waiting to be deployed at tower
sites. The web interface is crap, it won't allow you to put
PROTECTED] On
Behalf Of G.Villarini
Sent: Monday, November 07, 2005 4:04 PM
To: 'WISPA General List'
Subject: RE: [WISPA] IP based Remote Reboot
http://www.apcc.com/products/family/index.cfm?id=3
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
78
: WISPA General List
Subject: Re: [WISPA] IP based Remote Reboot
Which model APC has Ethernet reboot for $80?
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
- Original Message -
From: "G.Villarini" <[EMAIL PROTECTED]>
To: <[EMAIL PROTE
Monday, November 07, 2005 11:37 AM
Subject: RE: [WISPA] IP based Remote Reboot
Realay control or AC? Cause APC has a cheap ups that's has a Ethernet
port
for remote reboot ... $80
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Or
Not the cheapest, but they're really nice:
http://www.wti.com
I've used and installed them for many years.
Thank you
Frank Keeney
Pasadena Networks, LLC
Antennas, Cables and Equipment:
http://www.wlanparts.com
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
Realay control or AC? Cause APC has a cheap ups that's has a Ethernet port
for remote reboot ... $80
Gino A. Villarini,
Aeronet Wireless Broadband Corp.
[EMAIL PROTECTED]
www.aeronetpr.com
787.767.7466
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Blai
34 matches
Mail list logo