Thank you all for your responses. I change the AP to B mode only, then
set the ACK manually and now it's performance is on par with the Tr6600
we had before. I also changed 1 client to another AP.
Mark
On 08/12/2010 11:56 AM, Mark Dueck wrote:
Hi Everyone,
I had a bunch of my equipme
On Fri, 2010-08-13 at 06:48 -0600, Mark Dueck wrote:
> It's a brand new PS purchased about 2 months ago.
>
> I'll have to try B only then to see if that will have better
> performance.
>
> I've been checking all the clients, and I see some of them with very
> high retries. They are pushing thr
s too much going on.
Bob-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Friday, August 13, 2010 8:51 AM
To: WISPA General List
Subject: Re: [WISPA] Powerstation2 with very low throughput
How did you resolve this. I have 3
ispa.org] On Behalf
Of Robert West
Sent: Thursday, August 12, 2010 11:49 PM
To: 'WISPA General List'
Subject: Re: [WISPA] Powerstation2 with very low throughput
How old is your PS2? A year or so ago, a batch of PS2's had an issue with bad
MMCX connectors to the internal board
It's a brand new PS purchased about 2 months ago.
I'll have to try B only then to see if that will have better
performance.
I've been checking all the clients, and I see some of them with very
high retries. They are pushing through trees. Could be a likely cause
right?
On 08/12/2010 11:3
I'm assuming you have, but I've never had much luck with "G mode". With that
said, I just fixed a similar issue by using a a Bullet2HP (non "M"). -RickG
On Thu, Aug 12, 2010 at 1:56 PM, Mark Dueck wrote:
> Hi Everyone,
>
> I had a bunch of my equipment burnt on a tower. Previously I had all
>
rsday, August 12, 2010 1:56 PM
To: WISPA General List
Subject: [WISPA] Powerstation2 with very low throughput
Hi Everyone,
I had a bunch of my equipment burnt on a tower. Previously I had all
Tranzeo. Now I put up a Powerstation2 for my main AP with a Tranzeo 17 dbi
sector. I'm getting a max
With Ubiquity gear the normal / standard for troubleshooting is
something like this:-
... Update to the latest firmware (from their site)
also review what fixes in the latest beta (posted in the forum)
Try setting up your AP without Auto Ack and setup the Ack distance
manually.
Rega
My guess would be the low symbol rate you have on a few clients. Try
getting their signal better, or temporarily disabling them to see if
that helps.
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | ch...@uplogon.com
Hi Everyone,
I had a bunch of my equipment burnt on a tower. Previously I had all
Tranzeo. Now I put up a Powerstation2 for my main AP with a Tranzeo 17
dbi sector. I'm getting a max throughput of around 3 mbits. That's
looking at the throughput graphs in the PS2. Once I'm reaching that
t
10 matches
Mail list logo
