I saw something on the list serve for SkyPilot this weekend. Didn't read
it so this might be a repeat. See below about SkyPilot being sold to
smart meter company.
Original Message
Subject:| 06.01.09 | WiFi vendor SkyPilot sold to smart meter company
Date: Mon, 01 Jun
Thank Mac (and everyone else who replied).
I'll have to get a couple of these to check out. Neato..
Randy
Mac Dearman wrote:
This generally happens on the lower portion (or section) of the tower and is
caused by freezing water inside the tower leg. Make sure there are weep
holes on each
I have used HP printers for probably 15 - 20 years. The first printer (680c)
probably still works. Anything we've purchased in the past 10 years has been
garbage.
The DeskJet 6940 just plain stopped working, HP replaced it with a 6980, which
after 403 pages I hear is having problems.
The
Nothing but the midrange and higher HP lasers here. As sad as it is to
say, anything lower end is a gamble.
On 6/1/09, Mike Hammett wispawirel...@ics-il.net wrote:
I have used HP printers for probably 15 - 20 years. The first printer
(680c) probably still works. Anything we've purchased in
Why would you use inkjet? Switch to laser or LED. You want to use a single
pass system instead of a multi-pass. OKI MFCs are my first choice, as the
print quality is unsurpassed and consumables are inexpensive.
On Mon, Jun 1, 2009 at 8:26 PM, Mike Hammett wispawirel...@ics-il.netwrote:
I
Avoid any MFP unless you get extended warranty is a high end unit. To much that
can and will go wrong. And as with any ink jet you need to print to them daily
or risk having ink dry up and clog the heads. Stay laser. Had good luck with
any HP laser model we use or I used in the past and the
www.freecolorprinters.com
We have a C2424, which I don't think they offer anymore. Printer, Copy,
Scan, etc.
Scans to a hard drive, you download from the internal web interface. Very
handy.
Prints fast, really not much warm-up time. Wax-based ink, IMHO looks better
than laser.
They basically
Skypilot had some innovative antenna-switching technology, but had also
raised nearly $80M in VC funding to develop it. The VCs, on average,
probably lost 95% of their investment. It shows what all too often happens
when investors become enamoured with the sexiness of a technology, without
I've used inkjet due to the low volume. 3k pages in almost 2 years.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
From: Kristi Fundu fu...@it-nts.mk
Sent: Monday, June 01, 2009 1:54 PM
To: WISPA General List
We tried our luck with a Dell laser about 2 years ago. Not bad, but
still has a few bugs to work out. Tends to overheat / curl papers more
than the HP we had last did. No repair issues or anything though.
Randy
e...@wisp-router.com wrote:
Avoid any MFP unless you get extended warranty is
I got a HP 6122 deskjet that has printed over 20,000 pages in the last 8
years without a problem.
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of
If your looking for a MFP then Xerox got one think it's their 6180 can scan
direct to e-mail, windows file share or ftp server. Works great. Very good
color laser as well. They makes some of the best quality color lasers out
there.
/Eje
Sent via BlackBerry from T-Mobile
-Original
That's close to my home volume for laser. I've had an hp5m/n laser for 9
years at home. It was probably $300 when I bought it. I put toner in it
about every 3-4 years. It's still going strong.
At work we use an hp8150n laser printer, which is about 6 years old now,
and you can get them for
HP 9200 series will do that. You can even write flows to send jobs to
external programs for faxing, ocr, filing, etc.
On 6/1/09, Josh Luthman j...@imaginenetworksllc.com wrote:
I would love to find a scanner that will store the images to either a local
media or a networked server...
Josh
I can tell you right now that the HP5M/N was not $300 nine years ago...
probably closer to $2,000 brand new.
Travis
Microserv
jp wrote:
That's close to my home volume for laser. I've had an hp5m/n laser for 9
years at home. It was probably $300 when I bought it. I put toner in it
about
I love my HP LaserJet 4 and 5
4 still runs today
5 I gave away after a few years
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
When you have eliminated the impossible, that which remains, however
improbable, must be the truth.
--- Sir Arthur
I have a 4 running as well and have printed hundreds of pages since I got it
with zero problems.
1) It doesn't do color.
2) It doesn't scan, fax, copy, etc.
I'm reluctant to spend $500 on a better printer when the $200 ones I've been
getting have been garbage.
-
Mike Hammett
I really really really wanted a laser MFP. But budget said I had to get
an injet. I really did not want to support the
HP/Gillette-the-printer-is-cheap-we-make-it-up-on-ink/razors business model.
So we got an HP 7500 series MFP Inkjet. Sucker ROCKS. Print, Scan,
Email, PDF-ize and it sips the
Well, Id argue a different point.
Once again, a very important technology that could have really helped WISPs,
never really got used by WISPs, because VC's got involved, and let their
greed drive them to build a business model for the big pie-in-the-sky ROI,
that was not realistic, instead of
I sell (and use) HP PSC printers. The white with light grey, not the
dark gray ones (I do not knwo why the dark ones are such POS's). Never
touch a Lexmark (or Dell Home/SOHO AIO series, same brand). Lately I
have been pushing the Brother HL-2170W. Fast PPS with inexpensive
refills. BW only (they
Josh Luthman wrote:
I love my HP LaserJet 4 and 5
4 still runs today
We had an HP Laserjet 4, until it sent someone to the hospital. (Our
Printer Guy was replacing something, maybe the drum, and got overzealous
with balancing the printer's substantial bulk in a funny way. He got
Your point wrt to the unrealistic ROI's demanded by VC's certainly has
validity - many promising VC funded ideas end up crapping out because the
nature of the funding forces management to swing for the fence and take
unreasonable risks rather than pursue a more balanced, realistic, and
Other than sipping the ink, that sounds like my 6310.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
From: D. Ryan Spott rsp...@cspott.com
Sent: Monday, June 01, 2009 4:08 PM
To: WISPA General List wireless@wispa.org
On Mon, 2009-06-01 at 15:27 -0500, Mike Hammett wrote:
I'm reluctant to spend $500 on a better printer when the $200 ones I've been
getting have been garbage.
?? This is complete nonsense. What makes you think that the quality
of a $500 would be equivalent to a $200 printer? Certainly,
I am using Mobotix for cameras. The DVR software is free. Or the cams
can perform the DVR function. Hit me offlist and I can give you a link
to 2 I just put up out of 22 for a small city.
ryan
On Jun 1, 2009, at 6:16 PM, George Rogato wrote:
Anyone working with dvr's and cameras that
The $200 ones have a monthly duty cycle of what I've printed in 2 years and
fail.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
From: Butch Evans but...@butchevans.com
Sent: Monday, June 01, 2009 9:37 PM
To: WISPA
I finally have new fiber on order and getting rid of the T1's
(hooray!). The fiber connection will be at a new location and I'll be
redirecting traffic. One of the costs I'd like to either loose or
lower is my AC bill. The new location will consist of much less
equipment: a fiber/ethernet router,
What kind of throughout are you getting on 3.65?
-RickG
On Mon, Jun 1, 2009 at 1:33 AM, Travis Johnson t...@ida.net wrote:
Hi,
We have two small 3.65 repeaters (serving only other small WiPOPs). The
3.65 does work, but our experience was that it did not do any better in
NLOS than 2.4ghz
The Dilbert effect lives on at many companies!
-RickG
On Mon, Jun 1, 2009 at 11:43 AM, Tracy Tippett
tracytipp...@swiftwireless.com wrote:
God Morning All,
There is another side to this story. Having been on the manufacturing side,
I can tell you it is fairly common place for upper
I would think all of that equipment could sit in a closet in a normal
office environment and be just fine (even the PC based firewall). You
are really generating very little heat with only 3-4 devices.
Travis
Microserv
RickG wrote:
I finally have new fiber on order and getting rid of the T1's
With Mikrotik, throughput is all the same regardless of frequency. So,
here is the throughput chart:
5mhz channel = 7Mbps
10mhz channel = 15Mbps
20mhz channel = 30Mbps
40mhz channel = 50Mbps
So, with 3.65ghz, the fastest you could get it 30Mbps because there is
only 25mhz of spectrum
We have a couple RB1000s and Dell managed switches in areas without
environmental control and they've held up fine. The RB1000s get so
hot you can't touch them.
On Tue, Jun 2, 2009 at 12:08 AM, Travis Johnson t...@ida.net wrote:
I would think all of that equipment could sit in a closet in a
Well, I left that part out - this will be in a garden shed sitting
next to the water tank. Without cooloing, I expect the temperature
could reach around 100.
-RickG
On Tue, Jun 2, 2009 at 12:08 AM, Travis Johnson t...@ida.net wrote:
I would think all of that equipment could sit in a closet in a
Thats encouraging. How long have they been like that and what is the
highest ambient temperature they see?
-RickG
On Tue, Jun 2, 2009 at 12:13 AM, can...@believewireless.net
p...@believewireless.net wrote:
We have a couple RB1000s and Dell managed switches in areas without
environmental control
It's been in since they came out with the RB1000. Here is a graph of
the temperatures.
On Tue, Jun 2, 2009 at 12:20 AM, RickG rgunder...@gmail.com wrote:
Thats encouraging. How long have they been like that and what is the
highest ambient temperature they see?
-RickG
On Tue, Jun 2, 2009 at
35 matches
Mail list logo