It's an omni...
I think I'm gonna pull this out and drop in a tranzeo to see what it does as
well.
marlon
- Original Message -
From: Michael Baird m...@tc3net.com
To: WISPA General List wireless@wispa.org
Sent: Wednesday, November 11, 2009 8:38 AM
Subject: Re: [WISPA] ubiquity bullet2
this out and drop in a tranzeo to see what it does as
well.
marlon
- Original Message -
From: Michael Baird m...@tc3net.com
To: WISPA General List wireless@wispa.org
Sent: Wednesday, November 11, 2009 8:38 AM
Subject: Re: [WISPA] ubiquity bullet2
Marlon,
We've had quite a few
No idea.
- Original Message -
From: Michael Baird m...@tc3net.com
To: WISPA General List wireless@wispa.org
Sent: Thursday, November 12, 2009 7:40 AM
Subject: Re: [WISPA] ubiquity bullet2
Marlon,
I thought about this after you mentioned it, we are using Ubiquity on
the tower also
Subject: Re: [WISPA] ubiquity bullet2
Marlon,
I thought about this after you mentioned it, we are using Ubiquity on
the tower also, not MT, vendor readings will vary.
Are you using Bullet2HP's or Bullet2M's? The M series isn't wholly G
compatible at this time.
Regards
Michael Baird
Mine never matches. I have one I installed just the other night, one side
is stuck at -44. Reset the thing, flashed the bios again, still shows -44.
If I aim away, yeah, it changes but even if I get close it shows -44. The
other side shows -56. It all works so what the heck.
I'm using the new
Marlon,
We've had quite a few deployed (100 or so, some for 6 months), not seen
a week transmitter yet, all failures were ethernet related and normally
out of the box they failed (1 in the field). The levels are normally
within 1/2 db at the tower vs. the CPE, unless there is a tilt issue (AP
Did you power it up without an antenna connected? Could have damaged the
transmitter.
On Wed, Nov 11, 2009 at 9:38 AM, Michael Baird m...@tc3net.com wrote:
Marlon,
We've had quite a few deployed (100 or so, some for 6 months), not seen
a week transmitter yet, all failures were ethernet
To: 'WISPA General List'
Subject: Re: [WISPA] ubiquity bullet2
Mine never matches. I have one I installed just the other night, one side
is stuck at -44. Reset the thing, flashed the bios again, still shows -44.
If I aim away, yeah, it changes but even if I get close it shows -44. The
other side
I've done that :(
On Wed, Nov 11, 2009 at 11:43 AM, Jayson Baker jay...@spectrasurf.comwrote:
Did you power it up without an antenna connected? Could have damaged the
transmitter.
On Wed, Nov 11, 2009 at 9:38 AM, Michael Baird m...@tc3net.com wrote:
Marlon,
We've had quite a few
, vision cleared, ambition
inspired, and success achieved.
- Helen Keller
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Wednesday, November 11, 2009 11:17 AM
To: 'WISPA General List'
Subject: Re: [WISPA
List
Subject: Re: [WISPA] ubiquity bullet2
I've had the opposite experience. I have Bullet2's working but when they
dont I go back to Tranzeos - they always work. Are you using regular Bullets
or HP's??
-RickG
On Wed, Nov 11, 2009 at 11:44 AM, Steve Barnes st...@pcswin.com wrote:
Marlon I have
11 matches
Mail list logo