Hi:
Over two hours after an un successful MSK144 attempt with KE0LLH on 144
Mhz, this decode showed up on my screen.
040445 -8 2.4 1704 & R+03
Normally I wouldn't pay much attention to this but in this case I had
decode set to "Normal" (rather than "Deep".) The other station had
previously
On Fri, 19 Oct 2018, John wrote:
Hisashi,
When you started with Mojave, did you visit the Audio tab (WSJT-X >
Preferences) and select your preferred Audio stream - USB Audio Codec or similar?
What Audio link do you use between your rig (whicg rig?) and your computer?
Yes. It's USB Audio
Long time Linux user here too. I'm running Kubuntu 18.04, but have
considered switching to Linux Mint with the XFCE desktop. Being a long
time Linux user, I tend to compile from source 99+ percent of the time.
Old habits are hard to break :) I haven't seen many of the problems
compiling or
Hi Adam--
I compiled it yesterday, but these notes are not guaranteed to be 100%.
This was done to a Debian 9 machine, fully patched, which had previously
used the JTSDK to build WSJT-X 1.9.1. I took the latest source snapshot
for 2.0.0 RC3. These are new dependencies and musings/considerations
> On Oct 20, 2018, at 2:02 PM, wsjt-devel-requ...@lists.sourceforge.net wrote:
>
> From: John mailto:j...@rmnjmn.co.uk>>
> Subject: Re: [wsjt-devel] All versions of WSJT-X are not working under macOS
> (Mojave)
> Date: October 20, 2018 at 12:15:26 PM CDT
> To: WSJT software development
I expect I will take the 50 MHz rover station out tomorrow morning and try some
50 MHz MSK144 with rc-3 using the call VE7AFZ/R and with NA contest mode turned
on.
I aiming to be on the air by 7:30 am pacific on 50.280 MHz, SH on,15 sec
sequences and Tx first. I'll beam more or less south
Uninstalled all versions, deleted the .ini file and started from scratch.
Installed v1.9.1 and got it set up and now the frequencies and colors in
the various configurations there now stick.
Installed v2.0.0 rc3 and got it set up as well. Changed some of the colors
to match what I'm used to and
Bill:
I used the "normal" configuration and cloned it. Rename the clone to DXP
and switched to the DXP and made the frequency changes by deleting
everything and putting in just the DXP ones. Selected the normal config
and the frequencies are still DXP. If I reset the normal to the default,
On 20/10/2018 22:51, WB5JJJ wrote:
Will it be a possibility to have DISTINCT frequencies for each
Configuration created in an upcoming release of v2.0.x?
Yes, I know VP6D is only using v1.9.1 Fox/Hound, but looking down the
road, I would like to be able to save a "VP6D Configuration" with
Will it be a possibility to have DISTINCT frequencies for each
Configuration created in an upcoming release of v2.0.x?
Yes, I know VP6D is only using v1.9.1 Fox/Hound, but looking down the road,
I would like to be able to save a "VP6D Configuration" with ONLY their own
unique frequencies that
Larry,
Try to follow my procedure, I think you will resolve your problem.
Search the thread "Subprocess Error on Linux x86-64"
Good luck!
PY1ZRJ
Il 20/10/18 16:02, Larry ha scritto:
> Sorry for this second email but I noticed I left out a few items.
>
> wsjt-x 2.0.0-rc3
> cqrlog 2.3.0-1
>
I gave it a try some months ago and JTSDK was completly out of sync with
current WSJT-X. Nice to see that it is now possible to compile an up to
date versio for linux. My favorite platform is Raspberry on Debian based
and I am very interested if you can share your dependencies and fixes.
73 de
Paul -
Totally new to this list (in fact this is my first post here) but I've
also been compiling the 2.0.0 RC releases from source for Linux, not by
choice but by necessity (my current desktop distro of choice uses
neither .deb nor .rpm installers) and have run into the usual
dependency
Sorry for this second email but I noticed I left out a few items.
wsjt-x 2.0.0-rc3
cqrlog 2.3.0-1
Linux - Ubuntu 18.04 LTS
Error message occurs a short period of time after starting wsjt-x and
the fort.81 file exists in my home directory with my ownership and
privs. The error ever occurs if
Hi Paul,
On 10/20/2018 11:04 AM, Paul Bramscher KD0KZE wrote:
Running WSJT-X 1.9.1 r8747 compiled on Debian (AMD64) Linux. A couple
days ago an operator on 20M FT8 was calling CQ 052 {his call | his
grid}. Out of curiosity I clicked his message in the band activity
pane. My radio then
Hi Gorm,
On 10/20/2018 5:33 AM, Gorm Helt-Hansen OZ6GH wrote:
Fox - Hound mode. Qso with ZL7X.
I noticed WSJT-X had a delay when receiving answer from DX. I received a
multible callsign answer from DX. WSJT-X continued sending call. When
receiving a specific answer from DX, WSJT-X changed to
Richard,
> I see signals on the waterfall
This means that which ever wsjtx app you are running has access to sound input.
If there is no decode then the problem is somewhere else - read further down
for the solution.
I do not know what “Full Disk Access” means in this context. What did
Feature
CQ NUMBER call
The system will as you saw QSY to that freq and carry on the QSO there.
It is a very common option on Meteor Scatter or when 6m Es taking place - keeps
QRM on calling freq down.
It’s in the manual somewhere (not that obvious from memory) but is there.
Tom
GM8MJV
On
Great to hear about the upcoming 2.0.0 major release of WSJT-X. I've been
compiling my own versions of WSJT-X with the JTSDK for the past few years
(Debian Linux, AMD64). Will that project on SourceForge be updated when the
new general release becomes available? The JTSDK is/was a really
Running WSJT-X 1.9.1 r8747 compiled on Debian (AMD64) Linux. A couple days
ago an operator on 20M FT8 was calling CQ 052 {his call | his grid}. Out of
curiosity I clicked his message in the band activity pane. My radio then
switched to 14.052 MHz and the freq. pane turned red (indicating a
Good day all,
PY1ZRJ here,
Testing latest WSJT-X available release (2.0.0_rc3-lp150.1.1) on my
Linux openSUSE Tumbleweed, where I get the same error as reported by
MacOS users:
Running: /usr/bin/jt9 -s WSJT-X -w 1 -m 3 -e /usr/bin -a
/home/marco/.local/share/WSJT-X -t /tmp/WSJT-X
At line 145
Using WSJT-X 2.0.0-RC3 with Windows 10 64 bit.
Using NA VHF Contest mode for meteor scatter contacts on 2m. TX1 is grayed
out as it should be. However when changing contest setting in the advance
tab back to None, TX1 stays grayed out until you double click on it. This
appears to be a minor
Good morning, install the version r3 and after applying the file to correct
the error generated by Low, the program works well.
as for the color, now we do not know if we have worked an indicative, since
all the CQ, appear in green.
It would not be much more practical to apply a color to those
(I should have replied to this thread instead of the general rc3 thread)
For Mac Users:
I have installed MacOS Mojave on a spare drive and discovered a problem with
sound input.
Mac users with Mojave need to know that by default sound input is not
permitted. (Apple’s security gone over the
For Mac Users:
I have installed MacOS Mojave on a spare drive and discovered a problem with
sound input.
Mac users with Mojave need to know that by default sound input is not
permitted. (Apple’s security gone over the top…)
Until RC4, to use FT8 do this:
1. Download RC3 and drag WSJT-X
I noticed this same type reply from several stations operating last night
regular mode FT8. They would send report, I would respond with R +report then
they would send R +report out of sequence. 73 Morris WA4MIT
On Saturday, October 20, 2018, 4:58:23 AM CDT, Gorm Helt-Hansen
wrote:
Hi Sean,
I have replied off-list to your email.
— John G4KLA
smime.p7s
Description: S/MIME cryptographic signature
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
27 matches
Mail list logo