Hi Dirk,
so I can see what is happening please put the attached file into your
WSJT-X configuration files directory (on MS Windows that is the same as
the log files directory - "Menu->File->Open log directory"), then
restart WSJT-X and run a minimal test that demonstrates one of the
issues,
Bill,
sorry, but the update do not fix the problem., it makes it worse.
Error 1) the same mistake as before with the switch to split.
Error 2 VFO A LED flashed and no signal receive after band change.after pushing
the VFO A knop at trx, the trx work well until next band change.Then the error
After you reset the split are you pressing the band select button for that band?
Mike W9MDB
On Thursday, February 18, 2021, 01:47:55 AM CST, Dirk Kuschke via
wsjt-devel wrote:
I reset the TRX and checked the VFO´s that there is no split. After that, I
switch the trx to a
Hi Dirk,
so I can see what is happening please put the attached file into your
WSJT-X configuration files directory (on MS Windows that is the the same
as the log files directory - "Menu->File->Open log directory"), then
quit and restart WSJT-X. Do a minimum test that demonstrate the issue,
Hello Bill,
no, I use only VFO A never VFO B
73, Dirk DD5KD
Am Donnerstag, 18. Februar 2021, 13:44:06 MEZ hat Bill Somerville
Folgendes geschrieben:
Hi Dirk,
are you trying to run WSJT-X with reception from VFO B?
73
Bill
G4WJS.
On 17/02/2021 18:57, Dirk Kuschke via
Hi Dirk,
are you trying to run WSJT-X with reception from VFO B?
73
Bill
G4WJS.
On 17/02/2021 18:57, Dirk Kuschke via wsjt-devel wrote:
I had thought that too, but it is not the reasen, if I switched off
the split before, I get split again when switching over. Iswitched all
bands through
I reset the TRX and checked the VFO´s that there is no split. After that, I
switch the trx to a different frequency via the WSJTX-2.3.0 I get split
frequencies.
Am Donnerstag, 18. Februar 2021, 08:36:19 MEZ hat Dirk Kuschke
Folgendes geschrieben:
I understood that and also
I understood that and also checked it, unfortunately it doesn't solve the
problem.
It has not been set split by me in any memory of the TRX or the software.I only
wanted to use the frequencies from "Settings / Working Frequencies", which
worked properly without split up to version 2.2.2
73,
I assume you are pressing the band select button to store the setting in the
band stack?
VFOA and VFOB have their own separate band stacks.
So you may have to select each VFO and press the band select to store it.
Mike W9MDB
On Wednesday, February 17, 2021, 01:01:51 PM CST, Dirk
I had thought that too, but it is not the reasen, if I switched off the split
before, I get split again when switching over. I switched all bands through
with the software and switched split off, the next test, split was there again.
That's only since version 2.3.0 with 2.2.2 everything is as
On 17/02/2021 15:03, Dirk Kuschke via wsjt-devel wrote:
Hello,
since FTDX version 2.3.0
my yaesu ftdx3000d changes to split mode when I change the frequency,
using the button on the left. Up to version WSJTX2.2.2 this was not
the case.
The settings are:
Inline-Bild Inline-Bild
I change
Hello,
sinceFTDX version 2.3.0
my yaesu ftdx3000d changes to split mode when I change the frequency,
using the button on the left. Up to version WSJTX2.2.2 this was not thecase.
The settings are:
Ichange the Databits between 7 or 8 and the Stop bits between 1 or 2 with
noeffect. The
12 matches
Mail list logo