[wsjt-devel] Strict callsign

Forwarding from Andy In WSJT-X v2.3.0 rc2:Apparently, the regular expression in Radio.cpp named strict_standard_callsign_re doesn't match 2x1 call signs. The consequence is that anyone with a 2x1 call can't skip the grid msg by double-clicking the Tx1 button. 73 Andy WM8Q Seems a slight

[wsjt-devel] Wrong frequency written in ALL.TXT when changing band during decoding

Hello, I was using WSJT-X v2.3.0-rc2 on 30 meters, then I changed to 20 meters before the decoding phase was completed and the last two decodes were written to the ALL.TXT file with a frequency of 14.074 instead of 10.136. Here are the last lines in ALL.TXT and the F6DAY station was on 30m, not

Re: [wsjt-devel] Reproducible Conditions for 'Tx with no Audio'

Thanks Bill, Your clear summary is _very_ helpful. How the Audio device renumbering problem affects my use of WSJT-X: my other ‘audio’ task is essential; thus WSJT-X cycles will be lost; what I dislike: forgetting to restart WSJT-X then the delayed discovery of having lost many cycles.

Re: [wsjt-devel] Band Activity Display gets stuck?

Thanks.  The right-click and erase works. On 12/21/2020 9:25 AM, Bobby Chandler wrote: Right click in the window and click erase, or go to settings and turn off the 'Start decode at top' box. Bobby/N4AU ___ wsjt-devel mailing list

[wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

Thanks guys. Seems that people are playing at the fringe. I'll finish my little project and see what happens later. The new Apple M1 with Parallels seems lightning fast and when it shakes out we'll see what can be done. N0UU ___ wsjt-devel mailing

Re: [wsjt-devel] Contest-ID Field in ADIF Log

Hi Dave, I did read it, it is not a straight forward as you suggest since the contest types supported by FT8/FT4/MSK144 are more generic than the ones enumerated by the ADIF specification. I am not ignoring your suggestion, I just don't see an easy solution without adding new configuration

Re: [wsjt-devel] Contest-ID Field in ADIF Log

Bill and/or Joe: This is my third attempt to ask this question -- the last attempt was almost two weeks ago. Can you please read and respond? -- Dave Slotter, W3DJS On Tue, Dec 8, 2020 at 3:16 PM Dave Slotter, W3DJS wrote: > Bill and Joe: > > Any thoughts on

Re: [wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

There are few Arduino based balloon trackers that generate WPSR and APRS signals. There is an Arduino library called JT8Encode which is the software behind some of them. This is the entire signal processing from bytes to RF but easily adapted to insertion at any point in the processing.

Re: [wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

I've been messing about with a function which exports the tone parameters and sends them to a UDP program which then programs a DDS. Not for LF/VLF, this is for a multiplied transmit chain on SHF. The GFSK transitions in FT8 etc are added later in wsjt-x but for this lash-up, I took the values

Re: [wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

Someone I know has forked WSJT-X to get the tone sequence at the start of the TX cycle, which he then passes to a microcontroller embedded inside an FM radio, which is set up to change the frequency of the unmodulated FM carrier as per FT8 tones. RX is an RTL dongle. He makes contacts this way, so

Re: [wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

You still build a transmitter and or receiver, but it is not a "whole SSB rig" as mentioned. Just a PA driven with a pair of D/A chips followed by a filter or tank circuit to the antenna.  The essence of an SDR. At much higher frequencies, that could be mounted at the antenna to save on

[wsjt-devel] Band Activity Display gets stuck?

Right click in the window and click erase, or go to settings and turn off the 'Start decode at top' box. Bobby/N4AU -- n...@outlook.com n...@arrl.net ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net

Re: [wsjt-devel] FT450D is missing

Thank you so much Marco! I have saved your message. Michael advised me something similar with the ending -v gl nn On Mon, Dec 21, 2020 at 3:08 PM Marco Calistri wrote: > Andras, > > You can dig into get more details/information *out of WSJT-X* to verify > your hamlib and your interfaces

Re: [wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

And what is going to be transmitting this IQ data?  Where's the D/A conversion? Mike W9MDB On Monday, December 21, 2020, 08:15:23 AM CST, Tim Madden wrote: Would it be easiest for the software to have a port for UDP IQ data on both RX and TX? Then we only need to add the

Re: [wsjt-devel] FT450D is missing

YEP! Il 21/12/20 11:09, Black Michael ha scritto: I'm working with him Mike W9MDB On Monday, December 21, 2020, 08:08:45 AM CST, Marco Calistri wrote: Andras, You can dig into get more details/information _out of WSJT-X_ to verify your hamlib and your interfaces

Re: [wsjt-devel] Is there a program that will directly generate WSJT signals for 630M?

Would it be easiest for the software to have a port for UDP IQ data on both RX and TX? Then we only need to add the operating frequency for the bottom of the band to the software configuration for each UDP port number our station can support. That would open the application to any operating

Re: [wsjt-devel] Band Activity Display gets stuck?

On 21/12/2020 13:47, Tim Madden wrote: I am new so maybe this has been covered already. My Band Activity Display stops working after a couple hours of busy signals. I use Start new decodes at top and usually a blank line, which is really some dashes and the band. I can deselect those

Re: [wsjt-devel] FT450D is missing

Andras, You can dig into get more details/information out of WSJT-X to verify your hamlib and your interfaces settings/responses from your console/command prompt: /usr/bin/rigctld -m 1021(¹) -r /dev/FT-100_USB1(²) -p /dev/FT-100_USB0(³) -t 4532

[wsjt-devel] Band Activity Display gets stuck?

I am new so maybe this has been covered already. My Band Activity Display stops working after a couple hours of busy signals. I use Start new decodes at top and usually a blank line, which is really some dashes and the band. I can deselect those features and it sort of works, but best to

Re: [wsjt-devel] FT450D is missing

Bill, I have switched back to CW now. Let me wait for WSJT-X 2.3.0 Then, I am going to investigate the problem again. Have a nice Christmas! Andras HA6NN On Mon, Dec 21, 2020 at 1:41 PM Bill Somerville wrote: > Andras, > > I do not see any record of a rig control issues reported by you on this

Re: [wsjt-devel] Reproducible Conditions for 'Tx with no Audio'

Hi Roger, any change to audio device availability on MS Windows is likely to renumber the indexes of other devices, when this happens WSJT-X gets no notification that it has happened. There is no practical solution that I am aware of, we get a device index when we initially enumerate the

Re: [wsjt-devel] FT450D is missing

Andras, I do not see any record of a rig control issues reported by you on this list. Perhaps you can share the details so a resolution can be found? 73 Bill G4WJS. On 21/12/2020 09:34, Andras Bato wrote: Thank you so much, Mike. I haven't got any written details about the possible

Re: [wsjt-devel] FT450D is missing

Thank you so much, Mike. I haven't got any written details about the possible difference so far. The hard truth was when MSHV was working nicely with my FT450D and WSJT-x reported rig failure. Andras HA6NN On Sun, Dec 20, 2020 at 11:47 PM Black Michael via wsjt-devel <