Will do it Mike,
I will do it when radio is still cold, in order to avoid to have the
thermal drift as a possible cause, since I think the reason is another.
Regards,
---
*73 de Marco, PY1ZRJ (former IK5BCU)*
**
Il 12/06/23 17:27, Black Michael ha scritto:
Please place this file as
Black Michael wrote:
> Need people to test the latest Hamlib please
it works fine for me with an FT-991 on Debian 12
--
73 de IU5HKX Daniele
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will
Tested new version compiled from git repository and on my old YAESU
FT-100 I see same behavior I saw with previous Hamlib versions.
I use WSJT-X 2.7.0 RC1 with settings Split=RIG and Mode= Data Packet and
at the very beginning of the operation, the VFO A (Transmitter) and VFO
B (Receiver)
Both were connected to dummy loads, not antenna.
I just repeated now with Multi- Control knob setting power to zero watts output
on both the IC-7300 and the IC-705 radios with same results.
Question for you, was I to use the WSJT-X v2.7.0-rc1 as originally released or
was there another
Sounds like RFI Problems due to noise on the USB cable
Tests
If problems are occurring only during transmit:
#1 Reduce power to zero and see if the problem stops -- if it does stop
than it is definitely RFI. You will see certain higher power levels on certain
bands that cause problems.
*_Testing IC-7300/IC-705, IC-7610 Results_*
Mike, on the IC-7610 so far the new *libhamlib-4.dll* seems to work.
On the IC-705 and the IC-7300 however:
The WSJT-X program /*crashes */if I start either radio from 7.074 MHz or
higher and THEN change the band setting drop down to 80m e.g., 3.573
Need people to test the latest Hamlib please
https://n0nb.users.sourceforge.net/
#1 Backwards compatibility with WSJT-X has been fixed.
#2 Notable speedups for Windows operations
Here's an FT-991 comparison
Old:
1:rig_get_freq: elapsed=16ms
1:rig_get_freq: elapsed=17ms
1:rig_get_split_vfo:
; WSJTX Group
Cc: Black Michael
Subject: [wsjt-devel] Hamlib testing #Hamlib
I need everyone to test the latest Hamlib please!!
All known rig bugs have been fixed.
Testing in Rig Split and Fake It would be appreciated as well as rigctld
testing.
Successes/Failures please report.
Some recent
Software Development ; WSJTX Group
Cc: Black Michael
Subject: [wsjt-devel] Hamlib testing #Hamlib
I need everyone to test the latest Hamlib please!!
All known rig bugs have been fixed.
Testing in Rig Split and Fake It would be appreciated as well as rigctld
testing.
Successes/Failures please
Thu, 7 Jul 2022 13:51:03 + (UTC)
Black Michael via wsjt-devel
kirjoitti:
> I need everyone to test the latest Hamlib please!!
>
> All known rig bugs have been fixed.
> Testing in Rig Split and Fake It would be appreciated as well as
> rigctld testing. Successes/Failures please report.
With
I need everyone to test the latest Hamlib please!!
All known rig bugs have been fixed.
Testing in Rig Split and Fake It would be appreciated as well as rigctld
testing.
Successes/Failures please report.
Some recent important fixes are IC-9700 in split mode should work better now
and split
Please send new debug log.
Mike
On Monday, June 6, 2022, 12:55:22 PM CDT, Saku via wsjt-devel
wrote:
No...
It does not work. Pulled a few moments ago:
[saku@hamtpad ~]$ rigctld --version
rigctl Hamlib 4.5~git ma kesä 06 15:16:37 2022 + SHA=037384
Here you see what
No...
It does not work. Pulled a few moments ago:
[saku@hamtpad ~]$ rigctld --version
rigctl Hamlib 4.5~git ma kesä 06 15:16:37 2022 + SHA=037384
Here you see what happens: "split - rig", "Allow frequency changes while
transmitting" checked. Icom 7300
Yep! I have it.
I will make pull after weekend and see what that brings.
Black Michael via wsjt-devel kirjoitti 3.6.2022 klo 19.50:
You can get the absolute latest with git clone
git clone https://github.com/Hamlib/Hamlib.git
Mike W9MDB
--
Saku
OH1KH
.
This seems to be a defect in hamlib; RX-frequency should always stay put.
73's de Kari, oh2gqc
On 3.6.2022 10.58, Saku via wsjt-devel wrote:
| Subject: Re: [wsjt-devel] Hamlib testing |
| From: Saku via wsjt-devel |
| Date: 3.6.2022 klo 10.58 |
| To: wsjt-devel
sjtx bundled with WSJT-X 2.5.4 source tarball
on Ubuntu 18.04.6 LTS.
This seems to be a defect in hamlib; RX-frequency should always stay put.
73's de Kari, oh2gqc
On 3.6.2022 10.58, Saku via wsjt-devel wrote:
Subject:
Re: [wsjt-devel] Hamlib testing
From:
Saku via wsjt-devel
<ma
:
| Subject: Re: [wsjt-devel] Hamlib testing |
| From: Saku via wsjt-devel |
| Date: 3.6.2022 klo 10.58 |
| To: wsjt-devel@lists.sourceforge.net |
| CC: Saku |
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "All
source tarball
on Ubuntu 18.04.6 LTS.
This seems to be a defect in hamlib; RX-frequency should always stay put.
73's de Kari, oh2gqc
On 3.6.2022 10.58, Saku via wsjt-devel wrote:
Subject:
Re: [wsjt-devel] Hamlib testing
From:
Saku via wsjt-devel
<mailto:wsjt-devel@lists.sourceforge.net>
I think this has been fixed in the latest
Hamlib.http://n0nb.users.sourceforge.net/
Mike W9MDB
On Friday, June 3, 2022, 03:06:21 AM CDT, Saku via wsjt-devel
wrote:
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "Allow TX frequency changes while
with WSJT-X 2.5.4 source tarball on
Ubuntu 18.04.6 LTS.
This seems to be a defect in hamlib; RX-frequency should always stay put.
73's de Kari, oh2gqc
On 3.6.2022 10.58, Saku via wsjt-devel wrote:
| Subject: Re: [wsjt-devel] Hamlib testing |
| From: Saku via wsjt-devel |
| Date
10.58, Saku via wsjt-devel wrote:
Subject:
Re: [wsjt-devel] Hamlib testing
From:
Saku via wsjt-devel
Date:
3.6.2022 klo 10.58
To:
wsjt-devel@lists.sourceforge.net
CC:
Saku
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "Allow TX frequenc
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "Allow TX frequency changes while
transmitting" in settings/general tab
Set your TX around 300Hz by shift+left click on waterfall. Start TX
period and while your TX is on move your TX around 2800Hz by
>
> To: WSJT software development <mailto:wsjt-devel@lists.sourceforge.net>>
> Subject: Re: [wsjt-devel] Hamlib testing
> Message-ID: <1207100384.3374203.1654143570...@mail.yahoo.com
> <mailto:1207100384.3374203.1654143570...@mail.yahoo.com>>
> Content-Type
Hi Everyone
I have tested new the Hamlib with WSJT-X and JTDX in RIG and Fake It. I
tested it with IC-7300, IC-7000 and IC-706Mk2g - behaviour as expected
and no problems so far.
73 de Michael 5p1kzx
Den 31-05-2022 kl. 18:04 skrev Black Michael via wsjt-devel:
I need everyone to test the
You mean the Doppler tracking in the Astronomical window doesn't work?
Mike W9MDB
On Thursday, June 2, 2022, 07:24:04 AM CDT, Don Hawbaker
wrote:
On the 2.3 GHz EME band, we have to operate cross band. US transmits on 2304.1
while Europe transmits on 2320.1. Like wise, US
On the 2.3 GHz EME band, we have to operate cross band. US transmits on 2304.1
while Europe transmits on 2320.1. Like wise, US receives on 2320.1 and Europe
receives on 2304.1.
That is a 16 MHz split. I use A B VFO and a transceiver that can receive 160.1
and transmit 144.1.
But I cannot
Thu, 2 Jun 2022 13:37:07 +0930
Peter Sumner via wsjt-devel
kirjoitti:
> Hello Jarmo,
> when 'rig' or 'fake-it' is enabled the transmit frequency is moved to
> improve the location of your TX tones. As a test, try changing your TX
> baseband freq to say 200 Hz and set TX on, note the TX VFO
It's also to avoid the edges of your bandpass which can affect your transmitted
power.
Mike W9MDB
On Wednesday, June 1, 2022, 11:14:49 PM CDT, Peter Sumner via wsjt-devel
wrote:
Hello Jarmo,
when 'rig' or 'fake-it' is enabled the transmit frequency is moved to improve
the
Hello Jarmo,
when 'rig' or 'fake-it' is enabled the transmit frequency is moved to
improve the location of your TX tones. As a test, try changing your TX
baseband freq to say 200 Hz and set TX on, note the TX VFO frequency, then
move baseband TX to 2300Hz and repeat, I would bet that you will see
Wed, 1 Jun 2022 16:13:42 + (UTC)
Black Michael via wsjt-devel
kirjoitti:
Tested, but don't understand behaviour? Why freq goes -500 Hz when
tx'ing and stays there. I.E. I set 21074, both vfo, when first TX, lets
say vfo-b goes 21073500 and stays there. Where is this "delta" defined?
Ok, I
Il 31/05/22 13:04, Black Michael via
wsjt-devel ha scritto:
I need everyone to test the
latest Hamlib
Testing in Rig Split and
Fake It would be appreciated.
Successes/Failures please
Could you please test the 890S in Rig Split?
I have a report that the TS590SG works in Rig Split OK.
Mike W9MDB
On Wednesday, June 1, 2022, 10:57:51 AM CDT, jarmo via wsjt-devel
wrote:
Wed, 1 Jun 2022 08:05:06 -0700
Jim Preston via wsjt-devel kirjoitti:
> On 5/31/2022 9:04 AM,
Wed, 1 Jun 2022 08:05:06 -0700
Jim Preston via wsjt-devel kirjoitti:
> On 5/31/2022 9:04 AM, Black Michael via wsjt-devel wrote:
> > I need everyone to test the latest Hamlib
> > Testing in Rig Split and Fake It would be appreciated.
> > Successes/Failures please report.
Works ok with TS-590SG
On 5/31/2022 9:04 AM, Black Michael via wsjt-devel wrote:
I need everyone to test the latest Hamlib
Testing in Rig Split and Fake It would be appreciated.
Successes/Failures please report.
New hamlib for installation directions
#1 Shut down WSJTX/JTDX
#2 Download either the 32-bit or
lack Michael
Betreff: [wsjt-devel] Hamlib testing
I need everyone to test the latest Hamlib
Testing in Rig Split and Fake It would be appreciated.
Successes/Failures please report.
New hamlib for installation directions
#1 Shut down WSJTX/JTDX
#2 Download either the 32-bit or 64-bit
Mike,
Works fine on my TS590SG here in both Fakeit and Rig. Using Windows 10
and V2.5.4.
Bobby/N4AU
On 5/31/2022 11:04 AM, Black Michael via wsjt-devel wrote:
I need everyone to test the latest Hamlib
Testing in Rig Split and Fake It would be appreciated.
Successes/Failures please report.
Limited testing using split and fake it seems to work fine. I only performed
test cat and test ptt.
OS - Kubuntu 20.04
WSJTX 2.5.4
Rig - TS-590SG
I also have an IC-7300. If needed I can perform the same test with it.
73
Stan
KM4HQE
On 5/31/22 11:04, Black Michael via wsjt-devel wrote:
> I
Works FB in Fake It and Split here. Running WSJT-X v2.5.4 to a Yaesu
FTDX-101MP.
--Dennis NE6I
From: Black Michael via wsjt-devel
Sent: Tuesday, May 31, 2022 9:05 AM
To: WSJTX Group ; WSJT Software Development
Cc: Black Michael
Subject: [wsjt-devel] Hamlib testing
I need
work (comm errors) for either split
operation.
Al Pawlowski
Los Osos, CA USA
On May 31, 2022, at 10:38, wsjt-devel-requ...@lists.sourceforge.net wrote:
Date: Tue, 31 May 2022 16:04:45 + (UTC)
From: Black Michael
To: WSJTX Group , WSJT Software Development
Subject: [wsjt-devel] Hamlib tes
t;
> Date: Tue, 31 May 2022 16:04:45 + (UTC)
> From: Black Michael mailto:mdblac...@yahoo.com>>
> To: WSJTX Group mailto:m...@wsjtx.groups.io>>, WSJT
> Software Development
><mailto:wsjt-devel@lists.sourceforge.net>>
> Subject: [wsjt-devel] Hamlib te
Could you please collect some debug demonstrating this? I think I may know
what's happening.When you change frequency while transmitting does VFOA or VFOB
change frequency?
$mypath$myrigctld -m 3073 -r /dev/icom7300 -t 4532 -s 19200 -C
auto_power_on=0 $myvfo >/tmp/log.txt 2>&1 &
Mike
Hi Mike!
I have been using version that I have downloaded from Git on 2022-03-18
It has a problem that seems to be also in this latest version.
Fedora 35 linux
Wsjt-x v2.5.4 d28164-dirty
Icom Ic 7300
I am starting rigctld from script with:
mypath=/usr/local/bin/
myrigctld=rigctld
I need everyone to test the latest Hamlib Testing in Rig Split and Fake It
would be appreciated.Successes/Failures please report.
New hamlib for installation directions
#1 Shut down WSJTX/JTDX
#2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of
WSJTX/JTDX -- hopefully
44 matches
Mail list logo