On 03/08/2017 11:03 PM, Black Michael wrote:
> See if this helps you
> http://rolfblijleven.blogspot.nl/2015/02/howto-persistent-device-names-on.html
Just to add a bit to this excellent suggestion.
I have an IC-7100, and it installs two serial ports when attached.
Usually this is /dev/ttyUSB0
Den 25.05.2018 11:42, skrev F6BHK:
I could not find build-essentials in the repo (I seem to remember that name but
that was a very long time ago), so I had to:
It's build-essential (without the trailing 's')
apt-get install gcc g++ fortran cmake (lowercase; CMake does not exist) texinfo
Den 30.07.2018 15:15, skrev Richard PD1BHZ:
Hi all,
I just buy a new radio Yaesu ftdx 3000 but see a little problem.. don’t
now if it’s my fault If I switch the band in wsjtx 1.9.1 software
from say 20mtr to 40mtr my antenna is not switch from ant1 to ant2.
If I push the band button on
On 04/16/2018 07:04 PM, Gustafson Neil via wsjt-devel wrote:
> In logging contacts, it is customary to record Maidenhead Grid in the
> format AA99 where the first two characters are upper-case alpha. (In
> the full format of AA99aa99, only subsequent alpha characters are
> lower-case.)
Just
On 10/08/2018 04:29 PM, Shane Stroud wrote:
> I have discovered that the early serial numbered models of the Yaesu
> FT-847 had unidirectional CAT. Basically, the software can send
> frequencies and modes to the rig, but the rig cannot respond. This
> applies to serial numbers through about
Den 27.03.2019 12:39, skrev Magne Mæhre:
A couple of my club mates have written about a weird issues which showed
up when trying to use WSJT-X with an IC-9100. I've seen the same
issues with IC-7100 as well. Even though WSJT-X is not the real culprit
here, I thought some of you might find
A couple of my club mates have written about a weird issues which showed
up when trying to use WSJT-X with an IC-9100. I've seen the same
issues with IC-7100 as well. Even though WSJT-X is not the real culprit
here, I thought some of you might find it amusing...
https://www.la1k.no/?p=4219