ify Drives w/ read/write I/O test
* Verify drive & enclosure firmware levels
Tomorrow, I will be working on stor0010 at DC1. I'll be at DC2 Friday evening
to continue work on stor204.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile:
Don,
Confluent was originally designed to run alongside xCAT, and that process is
pretty easy:
https://hpc.lenovo.com/users/documentation/configconfluent_xcat.html
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Don Avart
Sent: Wednesday, January 10, 2024
Same for me. Would like to attend any virtual discussion that is had.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Nathan A Besaw via xCAT-user
Sent: Monday, October 2, 2023 1:59 PM
To: xCAT Users Mailing list
Cc: Nathan A Besaw
Subject: [External] Re
rom the xCAT DB dump. OS groups, would come from the /etc/group
file (though I would NOT just overwrite the new one - system GIDs aren't
guaranteed to be the same from install to install, and overwriting them can
cause big headaches.)
Regards,
Christian Caruthers
Lenovo Professional Services
Those are set by xCAT. $MASTER comes from the master field in the site table
(site.master), and $NODE comes from the nodelist.node setting (what you used
when you first defined the node in xCAT).
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Tomer Shachaf
.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: SOPORTE MODEMAT via xCAT-user
Sent: Wednesday, December 14, 2022 6:05 PM
To: xCAT Users Mailing list
Cc: SOPORTE MODEMAT
Subject: [External] [xcat-user] search in resolv.conf
Importance: High
Hi.
Please tell
at a shell
prompt, you should be able to troubleshoot the network connection between the
node and xCAT.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Nicolas Roosen
Sent: Wednesday, April 20, 2022 06:37
To: xCAT Users Mailing list
d the nics table. If you search for confignetwork on the docs
site, you'll see plenty of links to set up networking (additional interfaces,
aliases, bonds, etc.) https://xcat-docs.readthedocs.io
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message
k -v 1 -c {COMMUNITY} {SWITCH_NAME} .1.3.6.1.2.1.31.1.1.1.1
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Hannum, Keith
Sent: Tuesday, April 12, 2022 11:39
To: xcat-user@lists.sourceforge.net
Subject: [External] [xcat-user] xCAT getmacs from Cisco via SNMP?
Do
, Confluent adds a web interface. Info on that can be found here under
“Enabling the Web UI”:
https://hpc.lenovo.com/users/documentation/installconfluent_rhel.html
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Imam Toufique
Sent: Saturday, May 15, 2021 00:25
Are you asking about doing this as a prescript? I'm not sure what environment
variables are in place at that point.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: SOPORTE MODEMAT via xCAT-user
Sent: Monday, March 8, 2021 12:45
To: xCAT Users Mailing list
2 tools that are handy in managing ssh on the cluster are “updatenode -k“ to
rerun remoteshell on the nodes (makes sure the hosts got the correct keys
during provisioning), and “makeknownhosts” to (re)build the known_hosts file.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile
uld also look at group affiliation as well.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: SOPORTE MODEMAT via xCAT-user
Sent: Friday, March 5, 2021 13:40
To: xCAT Users Mailing list
Cc: SOPORTE MODEMAT
Subject: [External] [xcat-user] dynamic disk partition
't see the uefi file mentioned in the console logs of any
of them.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Thomas HUMMEL
Sent: Tuesday, March 2, 2021 04:37
To: xcat-user@lists.sourceforge.net
Subject: Re: [xcat-user] [Extern
own entry at the top
of the boot order during install.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Thomas HUMMEL
Sent: Monday, March 1, 2021 12:01
To: xcat-user@lists.sourceforge.net
Subject: [External] [xcat-user] nodeset and
end...:syncfiles return with 1
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
Long ago (>10years) I had a similar issue, w/ SMC switches I believe. Putting
the exact output from snmpwalk (e.g. "Ethernet49/1")fixed it for me then.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Thomas HUMMEL
Se
What do you see if you run (assumes you're using SNMPv1 & "public" community
string):
snmpwalk -v 1 -c public {SWITCH_NAME} .1.3.6.1.2.1.31.1.1.1.1
This should show how the switch reports the ports.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
hosts uses that entry:
##.##.##.## midway3-login1.rcc.local midway3-login1 l1
##.##.##.## midway3-login2.rcc.local midway3-login2 l2
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
___
xCAT-user mailing list
ke sure you run createrepo on the dir after adding
packages.
The otherpkglist is a list of package names, not file names. So you would want
"ssh-server" rather than "ssh-server-1.2.3-4.el7.x86_64.rpm". If you want the
32-bit version of a package, you can specify "ssh-server.i686&quo
e
the interface. To fix DNS, I have to add the DNS to ens3f0: nmcli c mod
xcat-ens3f0 ipv4.dns {DNSSERVER} ipv4.dns-search {DOMAIN} and restart
networkmanager to get things working correctly.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
he
group entry you're talking about.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Lachlan Simpson
Sent: Tuesday, March 3, 2020 4:34 PM
To: xcat-user@lists.sourceforge.net
Subject: Re: [xcat-user] [External] Networking: groups
t;compute","|\D+(\d+).*$|ib0!172.25.0.(($1-0)+10)|","ib0!-ib",,"ib0!Infiniband",,"ib0!ibnet",,
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Lachlan Simpson
Sent: Monday, March
with the output of an lsdef for the node?
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Lachlan Simpson
Sent: Monday, March 2, 2020 9:29 PM
To: xcat-user@lists.sourceforge.net
Subject: [External] [xcat-user] Networking: groups and nodes
nicips.bond0=x.x.x.x
nicnetworks.bond0=ib
nictypes.bond0=bond
nictypes.ib0=Infiniband
nictypes.ib2=Infiniband
This works in a recent customer site.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Huette, Antoine
Sent
If the systems have more than one IP address (e.g, provisioning & IPoIB), using
the nics table along with either “confignics –s” or “confignetwork –s” will
configure all interfaces as static.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: RUSSELL
-ces01-ipmi
[root@fry-mgmt0 ~]# grep fry-dss01 /etc/hosts
192.168.1.51 fry-dss01.fry.cluster.local fry-dss01 ### Alias doesn't get
created!
192.168.2.51 fry-dss01-ipmi.fry.cluster.local fry-dss01-ipmi
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
/share/man:$MANPATH
export XCATROOT PATH MANPATH
export PERL_BADLANG=0
[root@xcat ~]# echo ">>$XCATROOT<<"
>>/opt/xcat<<
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Kevin Keane
Sent: Tuesday, June 11, 2019 3:24 PM
To: xC
they are not being set.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Mark Gurevich
Sent: Tuesday, June 11, 2019 2:27 PM
To: xCAT Users Mailing list
Subject: [External] Re: [xcat-user] Includes not parsing when running nodeset
I think XCATROOT gets set
: Christian Caruthers
Sent: Tuesday, June 11, 2019 12:26 PM
To: xCAT Users Mailing list (xcat-user@lists.sourceforge.net)
Subject: [External] [xcat-user] Includes not parsing when running nodeset
When I run nodeset osimage=rhels7.5-x86_64-install-compute
#INCLUDEBAD:cannot open /share/xcat
When I run nodeset osimage=rhels7.5-x86_64-install-compute
#INCLUDEBAD:cannot open /share/xcat/install/scripts/pre.rh.rhels7#
#INCLUDEBAD:cannot open /share/xcat/install/scripts/post.xcat#
#INCLUDEBAD:cannot open /share/xcat/install/scripts/post.rhels7#
This is the default xCAT template that
168.100.10 192.168.100.1
Using domain server:
Name: 192.168.100.1
Address: 192.168.100.1#53
Aliases:
192.168.100.10.in-addr.arpa domain name pointer mgt01.domain.net
So, if I give it the remote DNS server, the reverse lookup works. Using the
xCAT MN, reverse lookup only works for internal IPs.
Regards,
I believe that is created when xCAT is installed. Not sure which RPM does it,
though. Possible the main xCAT or xCAT-server package. I don’t see the file in
any of the packages, so I’m guessing it’s created by a script.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289
, the DHCP server will not attempt to discover or
install when a PXE request is received.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Casandra H Qiu
Sent: Wednesday, November 28, 2018 15:12
To: xCAT Users Mailing list
Subject: [External] Re: [xcat-user]
So long as the shares are available to your provisioning network, it should not
break anything.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Kevin Keane
Sent: Wednesday, November 28, 2018 16:37
To: xCAT Users Mailing list
Subject: [External] [xcat-user
, or can it also be used for
IPMI?
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
field in the bootparams
table.
As for handling your devices in different nodes, you add them to either a
centos6 or centos7 group and populate the nics table accordingly by the group
membership (i.e.: centos6 would use “eth0” and centos7 would use “eno1”).
Regards,
Christian Caruthers
Lenovo
This information would be very useful in the xCAT docs!
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Casandra H Qiu
Sent: Tuesday, September 25, 2018 16:19
To: xCAT Users Mailing list
Subject: [External] Re: [xcat-user] rexec line 138: Deprecated option
domain.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Daniel Hilst Selli
Sent: Monday, June 18, 2018 12:56
To: xCAT Users Mailing list
Subject: [External] [xcat-user] What is the best way for changing/maintain
users/groups/passwords
Can you paste the contents of the networks table entry for the 148.187.x.xx
network you’re using for the lcg.cscs.ch network/subdomain?
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Carmelo Ponti (CSCS) [mailto:cpo...@cscs.ch]
Sent: Thursday, March 15
Are you asking about multi-homed cluster clients or whether xCAT can manage a
client that does not have an interface on the provisioning network? How do
these different domains translate to networks? Are they all on the same
network, or separated into different subnets?
Regards,
Christian
We’ve used similar scripts in the past without any checks to prevent unintended
disasters. It would be pretty easy to use an if or case statement to ensure
anything destructive only happens on the right systems.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
;powering-off","05-22-2017
07:39:25","synced","03-21-2014 14:55:26",,,
"bhh0004","ipmi,hadoop,x3630","powering-off","05-22-2017
07:39:25","synced","03-21-2014 14:55:
for each IP in hosts should match the networks.domain
entry for each respective subnet.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Kevin Keane [mailto:kke...@sandiego.edu]
Sent: Tuesday, October 31, 2017 4:21 PM
To: xCAT Users Mailing list <xcat-u
tes/stg.synclist
Running internal xCAT command: xdcp ...
Running command on xcat-bloom: ip -4 --oneline addr show |awk -F ' ' '{print
$4}'|awk -F '/' '{print $1}' 2>&1
File synchronization has completed for nodes.
Regards,
Christian Caruthers
Leno
about long rant here, let me try to summarize what I would like to do:
Is that above possible? Of course, I can modify the file with a post-install
script, but if xcat can do it within its own engine, then why write an
unnecessary script for it(?)
Thanks, guys, I couldn't have come this far wit
:
updating zone 'public.geode.iu.edu/IN': update failed: update RR is outside
zone (NOTZONE)
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Yuan Y Bai [mailto:by...@cn.ibm.com]
Sent: Monday, October 23, 2017 2:48 AM
To: xcat-user@lists.sourceforge.net
Cc: xcat-user
server responds to PXE requests.
You control what is served to PXE clients using the nodeset command.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Er Tao Zhao [mailto:erta...@cn.ibm.com]
Sent: Wednesday, October 25, 2017 3:58 AM
To: xcat-user@lists.sourcefor
What is the output of ‘nodeset n02 stat’? Also, what is the contents of the
chain table (tabdump chain)?
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Imam Toufique [mailto:techie...@gmail.com]
Sent: Tuesday, October 24, 2017 1:28 PM
To: xCAT Users Mailing
8.143.201.25",,
"farnsworth"," 10.0.0.38",,,"node1 inter-site link",
This leaves me with:
172.20.0.17 node1 node1.cluster.local
172.29.0.17 node1-imm node1-imm.cluster.local
148.143.201.25 farnsworth farnsworth.it.raboof.edu
172.40.0.17 no
I haven't used that feature, but it's documented here:
https://sourceforge.net/p/xcat/wiki/Managing_Ethernet_Switches/
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Kevin Keane [mailto:kke...@sandiego.edu]
Sent: Tuesday, August 29, 2017 6:43 PM
To: xCAT
compute nodes, and an
NFS storage node. Start with that.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Kevin Keane [mailto:kke...@sandiego.edu]
Sent: Friday, August 25, 2017 1:43 PM
To: xCAT Users Mailing list
Subject: [xcat-user] Recommendations for a lab
they are), and/or suggestions.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
Sent from my mobile device
On Mon, Aug 21, 2017 at 5:58 PM -0500, "Kevin Keane"
<kke...@sandiego.edu<mailto:kke...@sandiego.edu>> wrote:
The way I read it, this w
When I try this with updatenode, it doesn't appear to be grabbing the info from
that envlist file. Is this feature still in use? If not, what's a recommended
way to set a different hostname?
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 75
Have you looked at 'rvitals mynode leds' ?
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
From: Rundall, Jacob D [mailto:rund...@illinois.edu]
Sent: Wednesday, May 17, 2017 3:13 PM
To: xcat-user@lists.sourceforge.net
Subject: [xcat-user] using xCAT to view "A
for
each NIC configuration.
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http
If you enable debugging on your postscript and run it using updatenode
-P does it work?
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Hakan Bayındır [mailto:hakan.bayin...@tubitak.gov.tr]
Sent: Wednesday, March 29, 2017 8:49 AM
have
as heterogenous an environment as you like. Stateless images are somewhat
limiting.
Christian Caruthers
Lenovo Professional Services
757-289-9872
Sent from my mobile device
On Mon, Mar 6, 2017 at 10:31 AM -0500, "Nora D"
<uniqu...@live.com<mailto:uniqu...@live.com>
You would need to either build your VMs to use Ubuntu or reinstall your xcat
management node, ideally using centos 7.3. It's a good practice to use the same
OS on the stateless images as is on the xCAT management node.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
Is it possible to set up a VM on your existing MN? This might allow you to
import your current xCAT DB, upgrade to the latest version and try booting a
node or two off the VM instance.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From
e it, rung:
locally:
asu64 set IMM.LanOverUsb Disabled
xCAT:
pasu node set IMM.LanOverUsb Disabled
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Andy Loftus [mailto:alof...@illinois.edu]
Sent: Wednesday, September 07, 2016 3:54 P
Will probably want to include "eno" in your grep statement. Not all Etherned
devices come up as "ens". Not sure if there are any other varations.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Josh Nielsen [mailto:jniel...@hudsonalpha.
12_Release_Notes
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Andrew Loftus [mailto:alof...@illinois.edu]
Sent: Thursday, June 30, 2016 1:18 PM
To: xcat-user@lists.sourceforge.net
Subject: [xcat-user] discovering interface names dynamically
Does anyone hav
to respect the
10-minute guideline. I've seen where a customer was short by a minute or so,
and the FPC did not reset to factory default.
Once that is done, configfpc should be able to find the default IP.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Damir
, it will overwrite the symlink to
/etc/rc.d and will not work.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Lopilato, John [mailto:john.lopil...@lmco.com]
Sent: Wednesday, June 01, 2016 11:47 AM
To: xcat-user@lists.sourceforge.net
Subject: [xcat
nodes and SNs. If any point to the MN, they will need
to be changed.
Aside from all of that, it really depends on the particulars your cluster.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Josh Nielsen [mailto:jniel...@hudsonalpha.org]
Sent: Monday, May 02
I meant physically tasking the memory out and putting it back in. Sometimes a
bad DIMM connection can cause non-specific memory errors.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Jean-Baptiste Denis [mailto:jbde...@pasteur.fr
Have you tried reseating the memory in the system?
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Jean-Baptiste Denis [mailto:jbde...@pasteur.fr]
Sent: Monday, March 14, 2016 11:48 AM
To: xcat-user@lists.sourceforge.net
Subject
. This file is merely a yum
repo config. How would I go about getting the EPEL info there?
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Victor Hu [mailto:v...@us.ibm.com]
Sent: Friday, February 05, 2016 7:19 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] 回复
iSCSI,
http/ftp downloads, and gPXE script based booting.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Jeff White [mailto:jeff.wh...@wsu.edu]
Sent: Friday, February 05, 2016 4:32 PM
To: xcat-user@lists.sourceforge.net
Subject: Re: [xcat-user] 回复： Unable
in the profile.pkglist it is
skipped. The only way I can get it to install is via otherpkgs.
[http://lenovocentral.lenovo.com/marketing/branding/email_signature/images/gradient.gif]
Christian Caruthers
Enterprise IT Consultant
xESS
Lenovo US
[http://lenovocentral.lenovo.com/marketing/branding
I have that working. Is it possible to just use the existing repo rather than
replicating it on the management node?
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Xiao Peng Wang [mailto:w...@cn.ibm.com]
Sent: Thursday, February 04, 2016 10:41 PM
To: xCAT
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Jarrod Johnson [mailto:jjohns...@lenovo.com]
Sent: Thursday, October 15, 2015 1:14 PM
To: xCAT Users Mailing list
Subject: Re: [xcat
We've gone off the rails!
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Rich Sudlow [mailto:r...@nd.edu]
Sent: Thursday, October 15, 2015 9:20 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] The logo of xCAT
On 10/15/2015
Adding on (mohawk optional):
^_|||_^
【=◈︿◈=】
X C A T
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: John van Ommen [mailto:john.vanom...@gmail.com]
Sent: Thursday, October 15, 2015 1:03 PM
To: xCAT Users Mailing list
ation
Toolkit
How's that for an accronym? ;-)
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
From: Douglas Myers [mailto:dgmy...@us.ibm.com]
Sent: Tuesday, October 13, 2015 11:41 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] The logo of xCAT
I'm rather ambivalent a
it to vector and resize
it.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Rich Sudlow [mailto:r...@nd.edu]
Sent: Tuesday, October 13, 2015 9:52 AM
To: xCAT Users Mailing list
Subject: Re: [xcat-user] The logo of xCAT
On 10/13/2015 09:41
.
Finally, there's the RH documentation:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Installation_Guide/sect-kickstart-syntax.html
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile: 757-289-9872
-Original Message-
From: Langton [mailto:langt
In the past, I've used a postscript to reset the hostname based on either IP,
xCAT node name, whatever. In RH, edit the HOSTNAME line in
/etc/sysconfig/network, SLES uses /etc/HOSTNAME. Looks like CoreOS uses
hostnamectl command.
Regards,
Christian Caruthers
Lenovo xESS IT Consultant
Mobile
Seems like a documentation issue rather than a need for a new feature. I've
always done this with syncfiles since it's easier to propagate user group
changes using updatenode.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
From: Jarrod Johnson
.note.module.sig module.ko
new_module.ko as a means to bypass this error?
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
.
If none of that works, you might need to open a service call to replace the
system board. Pull a DSA because they'll probably ask for it.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
From: Damir Krstic [mailto:damir.krs...@gmail.com]
Sent: Wednesday
The mellanox ib driver/OFED stack is also available as a tarball from the
Mellanox download site.
http://www.mellanox.com/page/products_dyn?product_family=26
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
From: grihpc [mailto:gri...@126.com]
Sent
' is a group and rcons will only work on a single node.
'wcons' works fine with this config.
Hope that helps.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
-Original Message-
From: Allison Andrews [mailto:akandr...@lbl.gov]
Sent: Friday, March 06
the protocol to be
telnet in the switches table? When I remove the tn: in front of the
username or reconfigure the switches table to use SSH, xdsh stops working
on the switches.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Xiao
Sorry, I forgot to include that:
xcat-core-2.8.4
xcat-dep-201407170136
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Lissa Valletta/Poughkeepsie/IBM@IBMUS
To: xCAT Users Mailing list xcat-user@lists.sourceforge.net
xCAT[24352]: Error communicating with g8052-sw1:
Unknown user name
I get the same error whether I have the sshusername defined or not.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
, the solution is a kludge. Is
there a more elagant solution I'm missing or is this just a matter of the
qlcnic module needing to be included in future releases?
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
We actually saw this intermittently on x240 flex blades last week. Fresh
2.8.4 install with latest deps. Don't have firmware info though. uEFI was
B2E126EUS-1.31, IMM was 2.60 1AOO42Y.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
postscripts=syslog,remoteshell,syncfiles
rack=A1
serial=KQ9DN5T
side=1
slot=0
switch=g8052-sw1
switchport=7
unit=3
I found this bug from awhile ago: http://sourceforge.net/p/xcat/bugs/3552/
, but I have not yet tried the work around suggested.
Regards,
Christian
0.0.0.0
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Jarrod B Johnson/Raleigh/IBM@IBMUS
To: xCAT Users Mailing list xcat-user@lists.sourceforge.net
Date: 2014-07-23 09:01
Subject:Re: [xcat-user] r-commands
is trying to initialize is dictated by the ksdevice option
in the file I mentioned above.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Damir Krstic damir.krs...@gmail.com
To: xCAT Users Mailing list xcat-user
cons and management
settings as the dx360 nodes in this cluster.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Er Tao Zhao erta...@cn.ibm.com
To: xCAT Users Mailing list xcat-user@lists.sourceforge.net
Date: 2014-07
working.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Christian Caruthers/Richmond/IBM@IBMUS
To: xCAT Users Mailing list xcat-user@lists.sourceforge.net
Date: 2014-07-09 11:47
Subject:Re: [xcat-user] Intel RMM4
to be unique?
xcat-core-2.8.4
xcat-dep-201407010254
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn --
Open source business process management suite built on Java
mask=255.255.255.0
mgtifname=eth2
nameservers=172.20.0.1
net=172.20.0.0
ntpservers=172.20.0.1
tftpserver=172.20.0.1
172.20.0.1 is the xCAT MN.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
Found a typo in resolv.conf. That was it.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Dmitry Yulov dyu...@gmail.com
To: xCAT Users Mailing list xcat-user@lists.sourceforge.net,
Date: 04/17/2014 12:05 AM
Subject
: cannot set terminal process group (-1): Inappropriate ioctl for device
sh: no job control in this shell
dracut:/#
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn
From: Jonathan Mills jonmi...@renci.org
To: xCAT Users Mailing
Rod,
You need to make sure your ifcfg-eth* files have BOOTPROTO=static before
you restart the interface. Also make sure you have the NetworkManager
package uninstalled and/or NM_CONTROLLED=no in the ifcfg-eth files.
Regards,
Christian Caruthers
Senior Consultant
System x Linux HPC
Mobile
the compute nodes to the MN.Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
Find me on LinkedIn -Lissa Valletta/Poughkeepsie/IBM@IBMUS wrote: -To: xCAT Users Mailing list xcat-user@lists.sourceforge.netFrom: Lissa Valletta/Poughkeepsie/IBM@IBMUSDate: 01/23
1 - 100 of 119 matches
Mail list logo
