lly, unfortunately, I did not find a way in BIOS to forbid PXE on
this 1G nic
So what would be the correct way to handle this ?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/li
ne. The MNAME field of that zone's SOA
record will identify the master server for that zone."
while makedns will update what it found to be the NS records for
relevant zones (which are the slaves in my setup, so I have to setup
update forwarding in named config).
Best,
--
Thomas HUMMEL
Many than
Errata : of course, depending of the moment nodeset is issued,
kernel+initrd could be older than root
On 11/07/2022 15:09, Thomas HUMMEL wrote:
On 08/07/2022 22:49, Nathan A Besaw wrote:
Hello, thanks for your answer.
In my experience, this potential critical section is rarely a problem
...
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
y ansible-playbook step
Shouldn't the root fs be moved somewhere by nodeset as well instead of
being downloaded in the same place it is (re)generated ?
Is my understanding correct and can you think about some way to prevent
such a critical section ?
Thanks for your
about if, how, and by who resolv.conf is handled which may or may not
involve what's received via DHCP (see dns and rc-manager for start in
NetworkManager.conf man)
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https
-production with
MLNX installtion script (if built) then uploaded somewhere : not running
mlnofedinstall "live" in the ansible playbook.
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge
tallers.pl and mlnx_add_kernel_support.sh scripts
from MOFED 5.5
Finally, we install (with ansible but it may be used in your pkglist)
the following packages :
- mlnx-ofed-basic
- ibutils2
- qperf
Hope this helps
--
Thomas HUMMEL
___
zone information.
Hello, thanks for your answer. I was guessing such a reason but this can
be resolved by configuring exclude list (exlist) (exclude
/usr/share/zoneinfo keeping exceptions with the '+' syntax), can't it ?
Thanks
--
Thomas HUMMEL
: Mon 2021-11-22 14:52:00 UTC
RTC time: Mon 2021-11-22 14:52:00
Time zone: n/a (UTC, +)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no
Thanks for your help
--
Thomas HUMMEL
On 11/9/21 17:31, THomas HUMMEL wrote
On 11/9/21 16:18, THomas HUMMEL wrote:
Hello,
I just saw (because I encountered the issue again today) the merged code:
https://urldefense.com/v3/__https://github.com/xcat2/xcat-core/pull/7032/commits/16ea67622b6971e83e8aa3edf0d4568b8d784bb8__;!!JFdNOqOXpB6UZW0!5OvKmxB4i8tk4GBf_u-rACHsq
be in an exclude list ?
(in which case one can make an exclude exception for the locale he wants)
Thanks for your help
--
Thomas HUMMEL
On 9/2/21 11:53, THomas HUMMEL wrote:
On 8/19/21 9:18 PM, Mark Gurevich wrote:
Thomas,
Do you know if R wants the link of /etc/localtime to be a link to
/usr
).
Thanks for your help.
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
elp
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
itial idea to continue using xCAT for the PXE/ks part with
the problems I mentionned in my initial post.
Thanks for your time and answer anyway !
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge
dia iso
inside Satellite, download it and point xCAT to its content with
pkgdir=, just as I did with DVD.iso
In short: what would be the best way to use xCAT and Satellite for a
stateful install ?
Thanks for you help
--
Thomas HUMMEL
_
security teams have started requiring this, as
they don't like the concept of a PXE attempt every boot.
-Original Message-
From: THomas HUMMEL
Sent: Monday, October 11, 2021 9:37 AM
To: xcat-user@lists.sourceforge.net
Subject: [External] Re: [xcat-user] xCAT 2.16.2 new xNBA issue
Hello Mark
/xcat/xnba/nodes/.uefi) changed in sync with the
no-extension one after install ?
c) for duplicates messages : I still don't know why those messages show
in logs.
Thanks for your help
--
Thomas HUMMEL
On 10/1/21 18:19, THomas HUMMEL wrote:
[Sorry Mark for the duplicate answer - I mistakenly
uot;255.255.248.0",,,"1500",,
lsdef -i ip,mac
Object name: maestro-satvmtmpl
ip=192.168.148.204
mac=00:50:56:b5:ac:de
makedhcp -q node
# makedhcp -q maestro-satvmtmpl
maestro-satvmtmpl: ip-address = 192.168.148.204, hardware-address =
00:50:56:b5:ac:de
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
looking at the dhcp.pm plugin code I wonder if this behavior is not
expected, i.e. boot file name is empty in the event of a boot (as in the
chain table and as opposed to an install) : is it so ?
Thanks for your help
--
Thomas HUMMEL
On 30/09/2021 17:39, Thomas HUMMEL wrote:
On 23/09/2021
ge ip addresses but with an expired end date.
Can you help me figuring out what's going on ?
And thanks again for the new xNBA which fixes most of the previous issues.
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.
Hello,
may not be related but I had before no free lease issue when nodes to be
discovered booted before the xCAT node's object was created.
I think then I manually removed the lease from the lease files (which
may not be appropriate because of some race conditions).
On 23/09/2021 20:07,
MN node
(while the static profile has not auto-connected yet ?) - although from
the timestamp this the OFFER/DISCOVER I mentionned in 2) could not come
from this (same second as tftp transaction)
Thanks for your help and time
--
Thomas HUMMEL
___
xCAT-user
On 03/09/2021 16:17, Mark Gurevich wrote:
Thomas, can you try the following:
In file /opt/xcat//lib/perl/xCAT_plugin/dhcp.pm change line 2729 or
thereabouts to remove ".uefi":
From:
push @netent, " filename =
\"http://$tftp:$httpport/tftpboot/xcat/xnba/nets/
On 8/19/21 9:40 PM, Mark Gurevich wrote:
Thomas,
Does booting into genesis shell (rinstall shell) work for you
with the new xnba.efi ?
Hello.
Yes it does. Still if I remove the node's mac and try another normal
discovery it fails to boot as previously stated.
Thanks for your help
--
On 8/19/21 9:18 PM, Mark Gurevich wrote:
Thomas,
Do you know if R wants the link of /etc/localtime to be a link to
/usr/share/zoneinfo/. ?
If the link was something like /etc/localtime -> /etc/Europe/Paris,
would R be happy ?
Hello,
I don't know R at all but making /etc/localtime
Hello,
just asking : should I create an issue to raise more attention to this
or is it intended to stay like this because it would be considered to
work as expected and not needing patching ?
Thanks for your help
--
Thomas HUMMEL
On 10/08/2021 12:53, Thomas HUMMEL wrote:
On 09/08/2021
On 16/08/2021 22:24, Mark Gurevich wrote:
Thomas,
As a short term solution, can you use the older version of xnba.efi from
xnba-undi-1.0.3-131028.noarch.rpm ?
Yes. That's what I'm doing (extracted from the xCAT 2.15 rpm)
--
Thomas
___
Hello, any insight on the issue described below ?
Thanks for your help.
--
Thomas HUMMEL
On 06/07/2021 19:11, Thomas HUMMEL wrote:
Hello,
Well today I'm noticing that discovery (genesis) does not work anymore
(but does with old 2.15 xnba.efi file).
/tftpboot/xcat/xnba/nets/..uefi gets
a file can be sync'ed as a link)
Thanks for your help.
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 05/08/2021 20:06, Mark Gurevich wrote:
Perhaps the removal of the old link is ok, but instead of the "copy" we
should "link" $rootimg_dir/usr/share/zoneinfo/$timezone[0]" and
"$rootimg_dir/etc/localtime" ?
That's what I thought. man(5) localtime and man timedatectl set-timezone
(on
site as it it used
for stateful templates...
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
elp
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 08/07/2021 13:07, Thomas HUMMEL wrote:
On 07/07/2021 22:09, Mark Gurevich wrote:
Thomas,
Are you able to enter the genesis shell with "rinstall shell" ?
Hello,
yes, it works.
Hello,
actually I'm a bit surprise : rinstall shell behave differently
wether node
On 07/07/2021 22:09, Mark Gurevich wrote:
Thomas,
Are you able to enter the genesis shell with "rinstall shell" ?
Hello,
yes, it works.
Thanks for your help
--
Thomas
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
opment Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
Inactive hide details for "Thomas HUMMEL" ---07/06/2021 02:34:06
PM---Sorry for the multiple send. Draft handling went wrong on&quo
Sorry for the multiple send. Draft handling went wrong on my side...
On 06/07/2021 20:12, Thomas HUMMEL wrote:
Hello,
Well today I'm noticing that discovery (genesis) does not work anymore
(but does with old 2.15 xnba.efi file).
/tftpboot/xcat/xnba/nets/..uefi gets downloaded successfully
8sasiRH7OdbhySwMUhYFJasouvlcXW5YA$>
>
> Mark Gurevich
> Poughkeepsie Development Lab
> HPC Software Development - xCAT
>
> "If we knew what it was we were doing, it would not be called research,
> would it?"
> --Albert Einstein
>
>
>
> Inactive hide
Forgot to say that though I'm not sure, it's possible I did not perform
any discover since I installed this beta xnba.
--
Thomas HUMMEL
On 06/07/2021 19:11, Thomas HUMMEL wrote:
Hello,
Well today I'm noticing that discovery (genesis) does not work anymore
(but does with old 2.15 xnba.efi
8sasiRH7OdbhySwMUhYFJasouvlcXW5YA$>
>
> Mark Gurevich
> Poughkeepsie Development Lab
> HPC Software Development - xCAT
>
> "If we knew what it was we were doing, it would not be called research,
> would it?"
> --Albert Einstein
>
>
>
> Inactive hide
rpm you provided from which I extracted only
xnba.efi (not xnba.kpxe).
Can you help me figure out what's going on ?
Thank you
--
Thomas HUMMEL
On 21/06/2021 17:17, Mark Gurevich wrote:
Thomas,
The changes were done under https://github.com/xcat2/xcat-dep/pull/44
<https://urldefense.com
y 3sec
between seing xNBA dowload and the start of the image download.
What did you change/fix (if some high level explanation is possible) ?
Thanks a lot
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourcefor
Hello, sorry I was off 2 days.
On 14/06/2021 18:48, Vinícius Ferrão via xCAT-user wrote:
The issue is around the nodes that have custom network schemes, like
bonds and VLANs; it's something wrong during the confignetwork
postscript.
Ok. Don't know if it is still the case but I think
/resolv.conf a symlink to ../run/resolvconf/resolv.conf ?
5) the host line of /etc/nsswitch.conf
to figure out who manages /etc/resolv.conf
Hope it helps.
--
Thomas HUMMEL
rc-manager=
As specified on the documentation
https://xcat-docs.readthedocs.io/en/stable/advanced/domain_name_resolution
On 03/06/2021 15:30, Jarrod Johnson wrote:
BBS is *technically* part of the PnP BIOS specification, so doesn't
necessarily apply to UEFI boot, but I don't know how BBS order may be
used by some implementations to describe uefi boot attempt order.
I may have used the wrong term but SMC
On 03/06/2021 14:47, Nathan A Besaw wrote:
This effort may take some time, so I would suggest that you continue
using xNBA 1.0.3 for now. I'll let you know when we have a candidate
rpm available to test with.
No problem. Thanks.
--
Thomas
On 03/06/2021 12:57, Jarrod Johnson wrote:
The slowness may relate to the fact it would be initializing*every* nic in the
system, regardless of the one that booted
You mean that
a) snponly.efi relies on the built-in PXE option ROM
which initialize one nic, according to BBS order at a
Thanks a lot Jarrod.
Well I guess indeed, for my use case the old xNBA seesm the way to go.
I should have done it (and still can) more cleanly using the RPM.
Problem is though that any xCAT upgrade would pull the new rpm.
--
Thomas HUMMEL
On 03/06/2021 12:57, Jarrod Johnson wrote
case, wouldn't it ?
Thanks for your help
--
Thomas HUMMEL
On 02/06/2021 20:14, Jarrod Johnson wrote:
The iPXE codebase has code for things like UNDI ('legacy' bios generic
network stack) and SNP/NII for UEFI. As far as code running targeting
these, the nic vendor shouldn't matter, because
a test..
*From:* Thomas HUMMEL
*Sent:* Wednesday, June 2, 2021 10:52 AM
*To:* xcat-user@lists.sourceforge.net
*Subject:* [External] Re: [xcat-user] xCAT 2.16.2 new xNBA issue
So, basically, for me:
Supermicro H12DST-B with Intel 10G X550T (
:
downloading NBP file : 10s
xNBA initializing devices : 15s
start of osimage fetch : 15s later
whereas regardless of PXE version, with old xNBA systems boot and spend
max 1s in xNBA stage.
What do you think about it ?
Thanks for your help
--
Thomas HUMMEL
On 02/06/2021 14:34, Thomas HUMMEL
and PXE version 2.4.16 while batch 2 and 3 will
have FW 2.2 and PXE version 2.4.44
I still have to test flashing this new PXE fw to a batch2 node (which
worked with the new xNBA but spent >30s in it) and see if it fixes the
slow initialization.
Thanks
--
Thomas HUM
what has been changed to iPXE/xNBA to show
such a behavior ?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 3/2/21 2:53 PM, Thomas HUMMEL wrote:
According to ipxe.org
And also rfc4578
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 3/2/21 2:32 PM, Christian Caruthers wrote:
Looking at the dhcpd.leases file, it appears the determining factor in which file a node gets when
it PXE boots if the client-architecture. Unfortunately, I can't translate the different values I
see in the leases file ("00:00" and "00:09").
think that it could be positive to
- change .elilo and .uefi content as well when running nodeset
- have a stateful install leave PXE first
but I might not take into account some scenarii
What do you think ?
Thanks for you help
--
Thomas HUMMEL
_
tateful or stateless case, nodeset
foobar boot (for instance) only modifies
/tftpboot/xcat/xnba/nodes/foobar, which seems wrong to me ?
Can you help me figure out if this is an issue or if I'm missing something ?
Thanks for your help
--
Thomas HUMMEL
: Thomas HUMMEL
Sent: Wednesday, February 17, 2021 10:32 AM
To: xcat-user@lists.sourceforge.net
Subject: Re: [xcat-user] [External] Switch based discovery with mix of splitted
and non splitted ports
On 2/17/21 3:47 PM, Thomas HUMMEL wrote:
On 2/17/21 3:23 PM, Christian Caruthers wrote:
Long ago
On 2/17/21 3:47 PM, Thomas HUMMEL wrote:
On 2/17/21 3:23 PM, Christian Caruthers wrote:
Long ago (>10years) I had a similar issue, w/ SMC switches I believe.
Putting the exact output from snmpwalk (e.g. "Ethernet49/1")fixed it
for me then.
Thanks. I'm trying it.
Well this h
onal Services
Mobile: 757-289-9872
-Original Message-
From: Thomas HUMMEL
Sent: Wednesday, February 17, 2021 08:56
To: xcat-user@lists.sourceforge.net
Subject: Re: [xcat-user] [External] Switch based discovery with mix of splitted
and non splitted ports
On 2/17/21 2:41 PM, Christian Ca
ts (please see attachement) as Ethernetn/p.
Still the / or dotted syntax worked previously (granted not on the same
switch model nor the same xCAT version)
Thanks
--
TH
Regards,
Christian Caruthers
Lenovo Professional Services
Mobile: 757-289-9872
-Original Message-
From: Thoma
tax is the canonical one for split ports
- if this is an xCAT problem or a switch problem
?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
I made a typo. What should be read is:
r"ead by xcatpostinit1 in order to launch either xcatdsklpost 6
(runbootscript case) or not (no runbootscript case): in any case NOT
xcatinstallpost
On 05/11/2020 11:49, Thomas HUMMEL wrote:
read by xcatpostinit1 in order to launch either xcatdsklp
the mypostscript.post script unused
Am I correct ? If so, hope that helps someone ;-)
Note : I still didn't search why mypostscript.post gets removed when an
updatenode -P is run.
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
19:48, Thomas HUMMEL wrote:
Hello Cassandra,
from what I've read in the scripts themselves and tested in debug mode,
I came to the following partial conclusion:
1) postscripts
- postscripts : ran in post-install
- postbootscripts : ran at the first reboot after install
They're run via
an updatenode -P seems to remove it ?
Last thing : post.xcat.ng seems to call postbootscripts "prebootscripts"
and postscript "postbootscripts" (which adds to the confusion) : am I
correct ?
Thanks for your help
--
Thomas HUMMEL
On 03/11/2020 11:07, Thomas HUMMEL wro
to know is this :
all those generated or patched scripts on the CN hold some node's info
(node's name, ...) : what is the source of this info (local or from the
node object definition on the MN ?) and in what file can it be safely
removed (in order not to have the template info which will be incorre
On 02/11/2020 22:11, Lachlan Simpson wrote:
/xcatpost/mypostscript
Overlapping groups has the effect you expect - both sets of scripts are run.
Does that help at all?
Hello,
thanks for your answer but my question was more about the client side
(node) machinery (which is not so trivial
rrect info (NODE=, ...)
into the proper files.
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 12/08/2020 15:34, Jarrod Johnson wrote:
This happens all the time. It drove the following into a hook in confluent os
deployment:
if grep console=ttyS /proc/cmdline >& /dev/null; then
echo "Serial console has been requested in the kernel arguments, the local video
may not show
On 12/08/2020 15:24, Thomas HUMMEL wrote:
On 12/08/2020 15:09, Jarrod Johnson wrote:
What does /tftpboot/xcat/xnba/nodes/maestro-monitor look like?
#!gpxe
#install centos8.2-x86_64-monitor
imgfetch -n kernel
http://${next-server}:80/tftpboot/xcat/osimage/install-monitor-centos8.2
On 12/08/2020 15:09, Jarrod Johnson wrote:
What does /tftpboot/xcat/xnba/nodes/maestro-monitor look like?
#!gpxe
#install centos8.2-x86_64-monitor
imgfetch -n kernel
http://${next-server}:80/tftpboot/xcat/osimage/install-monitor-centos8.2/vmlinuz
imgload kernel
imgargs kernel quiet
On 12/08/2020 14:46, Jarrod Johnson wrote:
Could you unset nodehm.serialport for that node and see what output shows?
Hello,
I don't have any entry (node or group) in nodehm for this node...
--
TH
___
xCAT-user mailing list
files that have mismatched
UIDs/GIDs, after the installation is complete
"
I mean done by genimage itself, not in the postinstall script ?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge
On 11/05/2020 20:35, Thomas HUMMEL wrote:
Hello,
Just to inform about what I think may be a bug in xcatdsklspost:
https://github.com/xcat2/xcat-core/issues/6704
Hello,
actually a co-worker did a fine tracing of what exactly happened (taken
aside the xcatinfo quoting issue) :
When
Hello,
Just to inform about what I think may be a bug in xcatdsklspost:
https://github.com/xcat2/xcat-core/issues/6704
thanks
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
On 4/23/20 6:37 PM, Thomas HUMMEL wrote:
I was wondering why not on network-online.target instead ?
Hmm, I think you can forget this. After reading more precisely about
those 2 targets I see that I'm in a specific case where I've got remote
mounts and thus network-online.target is actually
xcatpostinit1 is meant to run xcatpost to run postscript and
also notify node status, I would have expected to depend on a fully up
network.
Besides, with the current lesser dependency, cannot it race against
NetworkManager for Network setup, in theory at least?
What do you thi
On 4/22/20 7:49 PM, Thomas HUMMEL wrote:
I think it may be the problem as NetworkManager has no way to be aware
of it (as it uses systemd-hostnamed service as a proxy).
Actually I'm not really sure about this. But I know I traced it and that
was the fqdn which was restored
On 4/22/20 7:49 PM, Thomas HUMMEL wrote:
However I saw in configeth script code (which is called be
confignetwork) that the transient hostname is set using the hostname(1)
command (hostname $NODE)
Moreover, I wonder it doing it this way plus the semantic of
hostname-mode hostname-original
rather use dbus-send or hostnamectl(1) --transient to
achieve the same ?
What do you think ?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 4/20/20 7:03 PM, Casandra H Qiu wrote:
I fixed this issue _https://github.com/xcat2/xcat-core/pull/6676_ ,
please check.
Hello,
yes it works.
Thanks a lot.
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https
nicips.ib0=172.16.0.2
nicnetworks.ib0=maestro_ipoib
nictypes.ib0=Infiniband
os=rhels8.1
postbootscripts=otherpkgs
postscripts=syslog,syncfiles
profile=cpu
provmethod=netboot-cpu-centos8.1
serial=S386345X0213782B
serialport=1
serialspeed=115200
status=
On 4/7/20 4:32 PM, Casandra H Qiu wrote:
I mean this command : lsdef -t group compute(for the group definition)
Oh ok, sorry. Here it is (attached).
anyway I can recreated this issue, looks like it may be broken since
2.15 release.
Ok.
Thanks
--
TH
#
compute:
objtype=group
and hosts tables.
Thanks for your help
--
Thomas HUMMEL
#netname,net,mask,mgtifname,gateway,dhcpserver,tftpserver,nameservers,ntpservers,logservers,dynamicrange,staticrange,staticrangeincrement,nodehostname,ddnsdomain,vlanid,domain,mtu,comments,disable
"campus","157.99.101.0",&
Hello,
just to let you know about the issue I just discovered while upgrading
from 2.15.0 to 2.15.1
https://github.com/xcat2/xcat-core/issues/
thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
On 3/12/20 8:55 AM, Thomas HUMMEL wrote:
On 3/10/20 3:16 PM, Thomas HUMMEL wrote:
regexp just does not seem to be supported at all in the
nics.nicaliases attribute :
"compute","ib0!|maestro-(\d+)$|172.16.($1/250-$1/250/2-2).($1%250+2)|","ib0!-ib0",,"ib0!In
On 3/10/20 3:16 PM, Thomas HUMMEL wrote:
regexp just does not seem to be
supported at all in the nics.nicaliases attribute :
"compute","ib0!|maestro-(\d+)$|172.16.($1/250-$1/250/2-2).($1%250+2)|","ib0!-ib0",,"ib0!Infiniband",,"ib0!maestro_ipoib&qu
that, I was talking about the fact that as far as I
know, not all NetworkManager properties (nm-settings(5)) can go into
ifcfg- files...
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists
quot;ib0!DEFROUTE=no"
did not generate, as I would have wanted the m1000-ib0 alias/cname
Did I miss something or is it expected to work, thus being a bug ?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
limitation but if you have some tricks (to be able
to pass any of nm settings via this attribute) , I could be interested
for the second setup, 172_16_0_0-255_255_248_0is not define in the
network table.
ah ok, so here it's just like stating a name I get it.
Thanks
--
Thomas HUMMEL
","maestro.pasteur.fr",,
A side, more general and different, question about nics is : what's the
use of nics.networks attribute relative to domain, as in my experience,
domain is always found by matching the ipaddress against networks table
or site.domain is used ?
Thanks for your help
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 12/21/19 11:25 PM, Vinícius Ferrão via xCAT-user wrote:
Hello, Thomas. I’m not from the xCAT development team but I’m curious with your
question.
Hello Vinícius [I was on vacation]
In your example you mean that the name server info on the SOA field is not
available on the NS fields of
Hello,
How can I add parameters to the install nic with xCAT 2.15 for stateless
Centos 8 nodes ?
As a matter of fact, I'm using confignetwork -s to make it static and it
seems that xCAT create a ifcfg-xcat- profile for that matter.
But that parameters I tried to add to the install nic via
Hello,
I read about the site 'dhcpinterfaces' attribute that:
"To disable the genesis kernel from being sent to specific interfaces, a
':noboot' option can be appended to the interface name. For example,
if the management node has two
interfaces, eth1 and eth2,
On 12/18/19 6:39 PM, Thomas HUMMEL wrote:
(I added a
Before=nfs-client.target).
This seems mandatory in my case to have mounts via the confignetwork
configured interface work.
Thanks
--
TH
___
xCAT-user mailing list
xCAT-user
On 12/18/19 5:39 PM, Thomas HUMMEL wrote:
In short what confuses is me is that xCAt provides a way to configure
additional nics but, in a stateless context, how do you make sure they
will be available (on time) to the services embedded in the image ?
This question still stands (especially
In short what confuses is me is that xCAt provides a way to configure
additional nics but, in a stateless context, how do you make sure they
will be available (on time) to the services embedded in the image ?
Otherwise what's the point to configure them in the first place ?
I did try to use
ov-eth2 maestro-300.maestro.pasteur.fr
- same in DNS
a) maestro.pasteur.fr zone :
maestro-300.maestro.pasteur.fr. 86400 IN CNAME
maestro-300-prov-eth2.maestro.pasteur.fr.
maestro-300-prov-eth2.maestro.pasteur.fr. 86400 IN A 192.168.153.48
b) maestroprov.pasteur.fr zone :
maestro-300-prov.maestroprov.pasteur.fr. 86400 IN A 192.168.10.10
Thanks for your help.
--
Thomas HUMMEL
___
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
On 12/12/19 7:38 PM, Thomas HUMMEL wrote:
However, about your link, for "How to handle the same short hostname in
different domains?" : why wouldn't host:otherinterfaces work instead of
using a second node object ?
My mistake, no second node obje
1 - 100 of 170 matches
Mail list logo
