Anyone familiar with xvmc have any thoughts on this?
Alex
__
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com---BeginMessage---
Hi List.
XvMC seems to be not much used as the mailing-list archive shows.
But since someone made a
ho un problema con la scheda video integrata su un
IBM CIRRUS LOGIC GD-546X VGA, e no riesco a trovare il
driver
On Sun, 2003-07-13 at 01:39, gabe f wrote:
I'm reposting this - no one knows what this is?
I do not know what is causing it, nor how to fix it.
Ive had similar trouble on some (older) Hercules cards, but a simple
reset usually fixed that.
Just type: reset enter when X has exited. It might give
On Sunday, July 13, 2003 3:10 am, Giacomo wrote:
ho un problema con la scheda video integrata su un IBM CIRRUS LOGIC GD-546X
VGA, e no riesco a trovare il driver
Attempted translation:
I have a problem with my integrated video card, an IBM CIRRUS LOGIC GD-546X
VGA, and I am not able to find a
Florian Zagler [EMAIL PROTECTED] writes:
The glidepad is working as a PS2 mouse device. And the wireless mouse works well
without the wheel as a PS2 mouse device.
Does anyone have an idea to get the wheel working?
Using the IMPS2 protocol doesn't work.
I have the same problem. I only
Andy Goth [EMAIL PROTECTED] wrote:
On Saturday, July 12, 2003 5:22 am, rijovm wrote:
I have Instald redhat linux 8.0 arklinux latest version alpha 7
Red Hat *and* Ark Linux?
but
there is aproblem with my videocard
ATI ALL INWONDER 128 PRO AGP
i think because I get 3 times the grafical
I would like to know, if anythere in the net binaries
for the accelerated Xservers from XFree86 3.3. for
for Linux on PowerPCs-systems are available. I'am
specially interesstetd into the servers for 3dlabs/GLINT,
Matorx and Weitek P9100. The Framebuffer version of the
server is widely avaiable
Hi...
I figured out what I wanted...
X automatically creates a virtual screen when you use a resolution
smaller than the maximum one available. So, if your modes are:
1024x768 800x600
and you use the 800x600 resolution, X will give you a virtual screen,
even if you have disabled it.
Now, is
FWIW, I was having screen resolutions on my laptop, and it turned out to
be my fault. Somewhere I'd gotten the idea that my laptop's LCD
resolution os 1400x1050, but in truth it's 1440x900.
Just something worth double checking, imho.
- Christian
gabe f wrote:
try removing the 1400x1050 mode
Hello,
I do not believe this is a bug necessarily, I am just trying to clarify
something with regard to getting XFree 4.3.0 running on an S3
Trio64V2/GX. On the list of supported hardware for 4.3.0, it states:
The s3virge driver in XFree86 4.3.0 supports the S3 ViRGE, ViRGE DX,
GX, GX2, MX, MX+,
Hello all,
This question seems to pop up from time to time, but I haven't quite found an
answer to it yet: is it possible to hide the mouse pointer, and if so: how?
Can I have it moved automatically out of sight or can it be simply hidden by
XFree86? Can this be done straight from the config
On Sun, Jul 13, 2003 at 04:44:12AM -0500, Andy Goth wrote:
On Sunday, July 13, 2003 3:10 am, Giacomo wrote:
ho un problema con la scheda video integrata su un IBM CIRRUS LOGIC GD-546X
VGA, e no riesco a trovare il driver
Attempted translation:
I have a problem with my integrated video
I've never tried this, but perhaps you could replaces all of the mouse
cursor sprites with all-transparent sprites?
I suspect this would give you the effect you're seeking.
- Christian
Pieter Hulshoff wrote:
Hello all,
This question seems to pop up from time to time, but I haven't quite found
Hi guys,
I just installed Mandrake 9.1 on a new Toshiba P25 laptop (1440x900
screen resolution).
With some generous help, I got the regular X server behaving perfectly:
My real and virtual desktops are both 1440x900, and it looks great.
However, when I hit ctrl+alt+F1, to go to the console
I've never tried this, but perhaps you could replaces all of the mouse
cursor sprites with all-transparent sprites?
I suspect this would give you the effect you're seeking.
Sounds like a good idea. Now to find where the cursorspec is hanging out, and
I can get Gimping. :) Would an empty
Sounds like a good idea. Now to find where the cursorspec is hanging out,
and I can get Gimping. :) Would an empty cursor file work too?
I think I just found an alternative way to achieve my goal. As I'm running 1
program on top of X (an SDL front-end to MAME I wrote this weekend), I can
just
On Sun, 13 Jul 2003, Pieter Hulshoff wrote:
I think I just found an alternative way to achieve my goal. As I'm running 1
program on top of X (an SDL front-end to MAME I wrote this weekend), I can
just disable the cursor using the proper SDL commands. Some quick tests seem
to indicate this is
On Sun, Jul 13, 2003 at 06:47:02PM +0200, Pieter Hulshoff wrote:
An alternative would be to go back about a day or two in either this list
or the devel list (can't remember which).
You are correct; my apologies. I'd been Googling on the topic for about an
hour before I sent my email, but
On Fri, Jul 11, 2003 at 05:35:19PM -0400, Oscar Lopez wrote:
Currently I have Red Hat Linux Rel.8.0. installed in a Dell Dimension
4500 Pentium 4 @ 2.4 GHz and 256 MB of RAM. The system has one hard
drive for Windows XP and a second one dedicated to Linux. The Video card
is NVDIA GeForce4 TI
Oooops.
Sorry, I forgot to attach the file. Here you are.
Thank you Gabe_1
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of gabe f
Sent: Friday, July 11, 2003 7:14 PM
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] Problems launching X server.
where's
Hi,
I'm trying to get XDarwin to run under macos on a dual G4-500 with
a 20 Apple Cinema display. The resolution of the display is 1600x1024,
and XFree86 runs just fine in rootless mode, but it just crashes if I
run it full screen. If I set the display resolution in MacOS to
1024x768 it
Is this a laptop? Either way it doesn't sound like it's the
server's problem, but if it's a laptop, the bios may be involved.
Mark.
On Sun, 13 Jul 2003, Adam Nielsen wrote:
Hi,
I've got an incredibly annoying problem with X11 and DPMS. When I set the
DPMS mode
On Sun, 13 Jul 2003, Christian Convey wrote:
Hi guys,
I just installed Mandrake 9.1 on a new Toshiba P25 laptop (1440x900
screen resolution).
With some generous help, I got the regular X server behaving perfectly:
My real and virtual desktops are both 1440x900, and it looks great.
Dear Sir or Madam:
I am a newbee working on learning Linux. Purchased the 9.1 release of
Mandrake from Ebay. Loaded the Mandrake MNF on this machine and it worked
correctly. Also have run Smoothwall on the same machine and it worked
correctly as well.
The machine is:
Pentium II 450 MHZ
196
Hello,
I do not believe this is a bug necessarily, I am just trying to clarify
something with regard to getting XFree 4.3.0 running on an S3
Trio64V2/GX. On the list of supported hardware for 4.3.0, it states:
The s3virge driver in XFree86 4.3.0 supports the S3 ViRGE, ViRGE DX,
GX, GX2, MX, MX+,
I believe X creates a virtual screen when you don't list your highest
resolutions first. Just make sure your resolutions are going from highest
to lowest, and delete all those up until your preferred one is first in
the list.
Jesse
On Sun, 13 Jul 2003, Jurgens du Toit wrote:
Hi...
I figured
Hello, I am having problems with setting up my system to use two video cards
within Linux. I know that every message forum on Linux has had this
discussion before but I have not found anything that helps my situation.
(yet)
I am running Mandrake 9.1 with XFree version 4.3.0
My ideo cards are
XFree86.0.log attached
=
Bruce Lindquist
[EMAIL PROTECTED]
XFree86.0.log
Description: XFree86.0.log
Hi,
X has started to crash at boot time after my PC was
booting OK for about a year. I'm running an updated
RH7.2. The only thing that happened lately is that I
almost filled up my /home partition. Any suggestions
would be appreciated.
Thanks,
Bill
__
Do you
JoeHill wrote:
Hello,
I do not believe this is a bug necessarily, I am just trying to clarify
something with regard to getting XFree 4.3.0 running on an S3
Trio64V2/GX. On the list of supported hardware for 4.3.0, it states:
The s3virge driver in XFree86 4.3.0 supports the S3 ViRGE,
It should work with the nv driver that comes with XFree86 4.3.
Alternatively, NVIDIA has binary Linux drivers that should work
with XFree86 versions back to 4.0.1.
Mark.
On Wed, 2 Jan 2002, Mali Laurent wrote:
Does anybody know about ABIT geforce FX 5600 DT 256MB
Your modules are mixed up. You are trying to use the nv
driver that comes with XFree86 but you're trying to use the
glx module that comes with NVIDIA's binary drivers. If you
want to use the nv driver you need to uninstall NVIDIA's
binary drivers (or at least remove NVIDIA's
Umm... thanks for your reply.
In my XF86Config.new2 file isnt my device driver for the nVidia card set to
nvidia? So wouldnt that mean that i am trying to use nvidias drivers and not
the generic nv driver? I would agree with you but when i change my
settings from nvidia to nv and also comment
On Sunday, July 13, 2003 6:24 am, [EMAIL PROTECTED] wrote:
here are my config and log file's
i hope you find the answer.
cannot find the display is the error when configure xconfig with my
original settings.
Your configuration and log file(s) look fine. It sounds like you have a
problem
On Sunday, July 13, 2003 1:50 pm, Jim Strzyzewski wrote:
I am a newbee working on learning Linux. Purchased the 9.1 release of
Mandrake from Ebay.
The machine is:
Pentium II 450 MHZ
The install went smooth until the configuration for the graphics card. No
matter how I twiddled with the
On Sunday, July 13, 2003 3:55 pm, Bruce Lindquist wrote:
XFree86.0.log attached
I don't see a crash of any sort in the log. Normally if XFree86 stops for any
reason it writes an explanation to the log before terminating.
If XFree86 somehow manages to freeze your machine and you cycle the
On Sunday, July 13, 2003 4:00 pm, w bugar wrote:
X has started to crash at boot time after my PC was
booting OK for about a year. I'm running an updated
RH7.2. The only thing that happened lately is that I
almost filled up my /home partition. Any suggestions
would be appreciated.
---//---
It is XFree86 v. 4.3, all the rpm's end in i586. Mandrake 9.1 requires at
least a Pentuim to run and I am using their install CD's so I assume that it
should be good to go. I installed an older Trident video card and X was
able to configure, load and run correctly.
Have found that the Diamond
No, it is a desktop PC. Athlon, KT133A and a GeForce2/MX. I'm pretty sure
it's an X11/nvidia problem, because if I switch out to a text console and let
it use DPMS to blank there it works perfectly every time.
Cheers,
Adam.
- Original Message -
From: Mark Vojkovich [EMAIL PROTECTED]
The log file you posted says:
(==) Using config file: /etc/X11/XF86Config-4
That config file is configured to use the nv driver.
Mark.
On Sun, 13 Jul 2003, Geoff Petzold wrote:
Umm... thanks for your reply.
In my XF86Config.new2 file isnt my device driver for
I had a similar problem getting dual-head going with a GF2/MX and an S3 Trio
64V+, and it was because acceleration wouldn't work on both video cards at
the same time. The solution was to disable acceleration on one of the cards
and that fixed the problem. (Option NoAccel I think...)
Cheers,
reset must be a linux thing, or something. I can barely read it says
something like
delete is now backspace
kill is now .
interrupt
but, didn't reset my screen. Thanks anyway.
On Sunday, July 13, 2003, at 04:46 AM, Jarmo Paavilainen wrote:
On Sun, 2003-07-13 at 01:39, gabe f wrote:
I'm
Ok if that is what it says then I must have posted the wrong one... lol sorry
bout that.
Heres the ones i am using.
I have stumbled onto something thsat is interesting... if i move the file into
my /etc/X11/ directory and rename it as XF86Config-4 then everything works
fine (ie both screens
I think the vesa driver is limited to the modes that are
in the bios. Sounds like that mode is not in there, but I don't
know much about the vesa driver.
As for the nv driver not restoring the console correctly,
perhaps CVS works better. I don't have access to one of those
laptops at
On Sunday, July 13, 2003 8:57 pm, gabe f wrote:
reset must be a linux thing, or something. I can barely read it says
something like
delete is now backspace
kill is now .
interrupt
but, didn't reset my screen. Thanks anyway.
reset only attempts to clear your terminal and set it to
If you don't load the glx module does it change anything?
Mark.
On Sun, 13 Jul 2003, Geoff Petzold wrote:
Ok if that is what it says then I must have posted the wrong one... lol sorry
bout that.
Heres the ones i am using.
I have stumbled onto
On Sunday, July 13, 2003 3:14 pm, Geoff Petzold wrote:
I have stumbled onto something thsat is interesting... if i move the file
into my /etc/X11/ directory and rename it as XF86Config-4 then everything
works fine (ie both screens work the way i thought they would. Thats wierd
how that when i
On Sunday, July 13, 2003 8:34 pm, Christian Convey wrote:
(II) VESA(0): Not using mode 1440x900 (no mode of this name)
because in my config file I do seem to have a Monitor--ModeLine defined
with that name.
vesa works by calling your BIOS to set modes. ModeLines have no effect
(right?).
I crashed X again but fail to see how i can ping my computer from a different
host if my comuter is frozen...
I have attached the log file...
When X crashes i get a terminal screen with what looks like part of my
/var/log/XFree86.0.log file printed on it... it says at the end:
PanoramiX eror
Ha guess I should attach the file eh? lol
Thanks agian
Geoff
On July 14, 2003 03:18 am, Andy Goth wrote:
On Sunday, July 13, 2003 3:14 pm, Geoff Petzold wrote:
I have stumbled onto something thsat is interesting... if i move the file
into my /etc/X11/ directory and rename it as XF86Config-4
On Sunday, July 13, 2003 5:06 pm, Geoff Petzold wrote:
I crashed X again but fail to see how i can ping my computer from a
different host if my comuter is frozen...
It's just a test to see if your computer really is frozen or if you only lost
keyboard/monitor I/O. You might be surprised.
Hi, All,
I installed RedHat9 on a HP laptop Omnibook 5500CT, which has CT
65548.XFree86 4.3 is installed. I looked around and copied some modeline
cfg, but the best result I get is a very low-resolution, I figure it was
about 480x320(it may be 640x480, but it definitely doesn't look that way),
_
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
XF86Config
Description: Binary data
XF86Config.0.log
Description: Binary data
53 matches
Mail list logo
