When a window manager starts up and tries to gain control using
XChangeWindowAttributes on the root window it normally receives a BadAccess
error if another window manager is already running. However this doesn't
appear to work with xinerama. I have been attempting to debug the problem but
my
Hi
Im searching for a funktion that does screen rotation at the Silicon Motion
Lynx 3M chipset .
Is there such a thing ??
this is needed to give a new produkt the ability to run linux and use its
full funktions . It is a Tablet PC
with a Transmeta 5600 with Touchscreen , firewire buildin
On Fri, 15 Feb 2002, Darren Marshall wrote:
When a window manager starts up and tries to gain control using
XChangeWindowAttributes on the root window it normally receives a BadAccess
error if another window manager is already running. However this doesn't
appear to work with xinerama. I
All,
Im not sure if my first messages made it to the list
or not but heres my situation. I am running on 4.2.0
with a Radeon AGP AIW (32mb) and a PCI Radeon
(also 32mb) and have been experiencing server hangs
and system lockups when running X with the XAA
extension enabled. In this
When compling X 4.2.0 with gcc 3.0.3 on a glibc 2.2.5 system I get the
following. Using gcc 2.95.3 on the same system compiles correctly. I have
tried altering the -traditional flag in the imakemdep.h file to no avail.
Thanks
K
cd ./config/imake make -f Makefile.ini BOOTSTRAPCFLAGS= CC=cc
Hello,
I am trying to install linux on a IBM thinkpad laptop (A30p, 2653),
but unable to get the X-window running. Initially I was getting
a incomprehensible screen full of rasters, but then when I tried
this configuration file last night, it worked fine. It could even
detect my USB
Hi,
I'd like to use one head of a Matrox G550 to drive a remote video projector.
The projector has an ICS 1523 PLL for pixel clock recovery from the SVGA
RGB analog signal. This set-up works under Windows 2000, and under Linux
(same PC) using a variety of other graphics cards and a variety
I've had this problem too with 4.2.0 HEAD CVS compiled with gcc 3.0.3 it
seems to break :-(
Shawn.
On Thu, 2002-02-14 at 04:19, Dr Andrew C Aitchison wrote:
For about a week, my automatic builds have been failing because mkfontdir
crashes. An older (but still post 4.2.0) version of
Hello.
I recently bought an Eizo L365 flat panel display. Since it has a DVI-D
connector, it would of course be nice to be able to use it in XFree86.
The Matrox G550 has DVI output, but is there, or will be, native support
for it in
XFree86? Since I use FreeBSD, I can't use the drivers from
I am running SuSE 7.3 and I love it! I purchased an ATI Radeon 32 mb video
card only to find out that it has a Radeon QD chipset. Unfortunately
Xfree86 and SuSE only partially support this chipset. So much so that when
I try to enable 3D acceleration I get a black screen or X freezes
I'd like to report an issue w/ a 4.1.0.1 [1] multihead setup, using an on-board
AGP NVidia Riva Ultra 64 and PCI STB S3 ViRGE/DX - basically the combination
of these two cards causes the system timer interrupt handling to be slowed
down by a factor of ~5:
1. install PCI card, boot ok
2. run X
Hi all,
I'm shortly going to be writing a review on some Radeon VE hardware under
XFree86 on Linux and one of the questions that came up is the ability to
handle multiple monitors off the dual SVGA heads on the Radeon VE in
specific and the Radeon line in general. I just need to know if
On 14 Feb 2002, Shawn Starr wrote:
I've had this problem too with 4.2.0 HEAD CVS compiled with gcc 3.0.3 it
seems to break :-(
Shawn.
On Thu, 2002-02-14 at 04:19, Dr Andrew C Aitchison wrote:
For about a week, my automatic builds have been failing because mkfontdir
crashes. An
13 matches
Mail list logo