On 2013-02-19 17:02, Victor Latushkin wrote:
On 2/19/13 6:32 AM, Jim Klimov wrote:
On 2013-02-19 14:24, Konstantin Kuklin wrote:
zfs set canmount=off zroot/var/crash
i can`t do this, because zfs list empty
I'd argue that in your case it might be desirable to evacuate data and
reinstall the
On 2/19/13 6:32 AM, Jim Klimov wrote:
On 2013-02-19 14:24, Konstantin Kuklin wrote:
zfs set canmount=off zroot/var/crash
i can`t do this, because zfs list empty
I'd argue that in your case it might be desirable to evacuate data and
reinstall the OS - just to be certain that ZFS on-disk struc
Well I can't see anything else to help you, except trying to replace your
failed vdev and resilver from there…
On Feb 19, 2013, at 2:24 PM, Konstantin Kuklin
wrote:
> zfs set canmount=off zroot/var/crash
>
> i can`t do this, because zfs list empty
>
> 2013/2/19 Fleuriot Damien :
>> The thi
If I understand you correctly, you have:
- booted another system from flash
- NOT replaced the failed device
- under this booted system, resilvering takes place automatically
While I cannot tell why ZFS tries to resilver without a new, proper device, I
think it will only work once you've replace
On 2013-02-19 14:24, Konstantin Kuklin wrote:
zfs set canmount=off zroot/var/crash
i can`t do this, because zfs list empty
I'd argue that in your case it might be desirable to evacuate data and
reinstall the OS - just to be certain that ZFS on-disk structures on
new installation have no def
zfs set canmount=off zroot/var/crash
i can`t do this, because zfs list empty
2013/2/19 Fleuriot Damien :
> The thing is, perhaps you have corrupted blocks that weren't caught either by
> ZFS or your drives' firmware, preventing the pool's operation.
>
> Seeing zroot/var/crash is the problem, cou
On 2013-02-19 12:39, Konstantin Kuklin wrote:
i did`t replace disk, after reboot system not started (zfs installed
as default root system) and i boot from another system(from flash) and
resilvering has auto start and show me warnings with freeze
progress(dead on checking zroot/var/crash )
Well,
i did`t replace disk, after reboot system not started (zfs installed
as default root system) and i boot from another system(from flash) and
resilvering has auto start and show me warnings with freeze
progress(dead on checking zroot/var/crash )
replacing dead disk healing var/crash with <0x0> adress
Reassure me here, you've replaced your failed vdev before trying to resilver
right ?
Your zpool status suggests otherwise, so I only want to make sure this is a
status from before replacing your drive.
On Feb 18, 2013, at 8:48 AM, Konstantin Kuklin
wrote:
> i can`t do it, because resilverin
i can`t do it, because resilvering in progress(freeze on 0.1%) and zfs
list empty
2013/2/17 Fleuriot Damien :
> Hmmm, zfs destroy -f zroot/var/crash ?
>
> Then you can try to zfs mount -a
>
>
>
> Removing pjd and mm from cc, if they want to read your message they're old
> enough to check their ML
Hmmm, zfs destroy -f zroot/var/crash ?
Then you can try to zfs mount -a
Removing pjd and mm from cc, if they want to read your message they're old
enough to check their ML subscription.
On Feb 17, 2013, at 3:46 PM, Konstantin Kuklin
wrote:
> hi, i have raid1 on zfs with 2 device on pool
>
Also, adding to my recent post: instead of resilvering, try to run
"zpool scrub" first - it should verify all checksums and repair
whatever it can via redundancy (for metadata - extra copies).
Resilver is similar to scrub, but it has its other goals and
implementation, and might be not so forgivi
On 2013-02-17 15:46, Konstantin Kuklin wrote:
hi, i have raid1 on zfs with 2 device on pool
first device died and boot from second not working...
You didn't say which OS version created the pool (ultimately -
which pool version is there) and I'm not sure about support of
the zfs versions in tha
hi, i have raid1 on zfs with 2 device on pool
first device died and boot from second not working...
i try to get http://mfsbsd.vx.sk/ flash and load from it with zpool import
http://puu.sh/2402E
when i load zfs.ko and opensolaris.ko i see this message:
Solaris: WARNING: Can't open objset for zro
14 matches
Mail list logo
